|
Forum Rules | Firearms Safety | Firearms Photos | Links | Library | Lost Password | Email Changes |
Register | FAQ | Calendar | Today's Posts | Search |
|
Thread Tools | Search this Thread |
November 14, 2017, 03:35 PM | #1 |
Senior Member
Join Date: January 29, 2009
Location: Texas
Posts: 256
|
What is the best best Minie' ball mold for live firing of Pedersoli 1861 Springfield
I just got a new Pedersoli 1861 Springfield and while I do reenacting also ,my primary hobby for the past 23 years is Cowboy Action Shooting which is using live ammo. I do reloading and have cast round balls for my cap and ball pistols. I have never shot a musket with live ammo so if I buy any gun even for reenacting I would also like to shoot it at the shooting range with authentic type Minie' balls. I was wondering which bullet molds and sizers would be best for this particular manufacturer's barrel .
Thank you, Mike
__________________
God is fluxing me which is good but it is not fun. |
November 14, 2017, 04:15 PM | #2 |
Senior Member
Join Date: September 8, 2007
Location: Mississippi
Posts: 16,189
|
I use a Lyman 575213 in my Chiappa Enfield. It's an original style .575 mold at 510 grains but mine drop at .577 so no sizing needed. A minie should be .001-.003 under bore size. Powder charge should be from 60-70 grains but much over 70 and the pressure blows past the skirt. Pure lead only or the skirt wont expand correctly and they'll be hard to load.
|
November 14, 2017, 04:29 PM | #3 |
Senior Member
Join Date: January 29, 2009
Location: Texas
Posts: 256
|
what powder do you use?
__________________
God is fluxing me which is good but it is not fun. |
November 14, 2017, 04:35 PM | #4 |
Senior Member
Join Date: September 8, 2007
Location: Mississippi
Posts: 16,189
|
Swiss 2F or Pyrodex RS.
|
November 14, 2017, 05:09 PM | #5 |
Senior Member
Join Date: January 7, 2017
Location: Colorado
Posts: 272
|
I got one a couple of months ago and have had good results with the original style mini. Shooting 60 grains of 2fg Goxe with beef tallow and beeswax lube. The short coming is the sights for me and mine had a poor trigger pull. I found the stirrup in the lock was to short and replaced it with a slightly longer one. That and some minor stoning makes the lock work more like an original 1861. Groups at 100 yards from the bench are about 5 inches for five shots.
|
November 14, 2017, 05:47 PM | #6 |
Senior Member
Join Date: January 29, 2009
Location: Texas
Posts: 256
|
What mold and or sizer do you use for the is the "original minie style"
__________________
God is fluxing me which is good but it is not fun. |
November 14, 2017, 07:43 PM | #7 |
Senior Member
Join Date: November 18, 2010
Location: Orygun
Posts: 869
|
The Lyman 575213-OS is the "Old Style" minie and looks just like dug ups from the battlefields. It is ~460grs. Most skirmishers will shoot a thinner skirted minie and maybe only 40-50 grs FFFg. The 575213-OS has a thicker skirt and I have shot up to 90grs of FFFg Goex as a hunting load. The Lyman 577611 is a 530 gr heavy skirted minie I've used for elk hunting. The LEE and other minie molds have thinner skirts for lighter loads. 60grs FFg is pretty close to the service load. You need to measure what your bore diameter is and then choose the appropriate mold. Many minies are just shot as cast, unsized. Often you can just match the mold size to the bore diameter.
Minies are much harder to cast. You need a hot mold and hot lead. Weight them all as they can have hidden voids. Most voids are visible inside the hollow base. Check out the N/SSA for their stickies and accuracy info. I haven't shot my Zouave in a long time but remember getting 4" groups @100 yds from a rest.
__________________
With over 15 perCUSSIN' revolvers, I've been called the Imelda Marcos of cap & ball. SASS#3302 (Life), SASS Regulator, NRA (Life), Dirty Gamey Bastards #129 Wolverton Mtn. Peacekeepers (WA), former Orygun Cowboy (Ranger, Posse from Hell) |
November 14, 2017, 09:43 PM | #8 |
Senior Member
Join Date: September 8, 2007
Location: Mississippi
Posts: 16,189
|
This is one of mine.
This is one recovered from 300 yards. |
November 15, 2017, 04:43 AM | #9 |
Senior Member
Join Date: October 18, 2005
Posts: 275
|
There is a lot of variation in the bore size on these guns even from the same manufacturer. First thing you need to do is measure the bore size on your particular rifle to determine the best size minie to use.
|
November 15, 2017, 08:09 PM | #10 |
Senior Member
Join Date: June 17, 2010
Location: Virginia
Posts: 6,896
|
Pedersoli is fairly consistent... and consistent w/ the originals
Use the Lyman 213 (old style/thin skirt) and ~60gr 3Fg (GoEx here) A long history of accuracy -- and killing both man & beast. |
November 15, 2017, 08:40 PM | #11 |
Senior Member
Join Date: January 29, 2009
Location: Texas
Posts: 256
|
What is the best best Minie' ball mold for live firing of Pedersoli 1861 Springfield
|
November 15, 2017, 09:06 PM | #12 |
Senior Member
Join Date: June 17, 2010
Location: Virginia
Posts: 6,896
|
No sizing. Shot as-cast w/ pure lead
Simple Dip-Lube in melted 3:1 Crisco/Beeswax and set aside. See whole string here: https://thefiringline.com/forums/sho...d.php?t=526504 |
June 5, 2018, 10:49 AM | #13 |
Senior Member
Join Date: January 29, 2009
Location: Texas
Posts: 256
|
I just cast my first Minies today with and I tried the fit to my gun and they are slightly too large to drop in. They should be able to drop in right?
If so I will need to size them down some I think. Also the bullets came out pretty well shaped but the smooth surfaces have a little waviness in them. I used a hot setting on my Lee bottom pour pot. I am wondering if the mold was running too cool. Mike
__________________
God is fluxing me which is good but it is not fun. |
June 5, 2018, 11:43 AM | #14 |
Senior Member
Join Date: September 8, 2007
Location: Mississippi
Posts: 16,189
|
They shouldn't actually just drop in from muzzle to breech. The weight of the steel ramrod will push mine down to about the last three inches or so. You will need to measure your bore and get a sizer that will size them no more than .003 undersize.
|
June 5, 2018, 01:22 PM | #15 |
Senior Member
Join Date: November 18, 2010
Location: Orygun
Posts: 869
|
A wrinkled bullet means either the lead or the mold is too cold. PURE, dead soft lead is necessary to have the skirt flare to seal the bore.
__________________
With over 15 perCUSSIN' revolvers, I've been called the Imelda Marcos of cap & ball. SASS#3302 (Life), SASS Regulator, NRA (Life), Dirty Gamey Bastards #129 Wolverton Mtn. Peacekeepers (WA), former Orygun Cowboy (Ranger, Posse from Hell) |
June 5, 2018, 01:57 PM | #16 | |
Senior Member
Join Date: September 8, 2007
Location: Mississippi
Posts: 16,189
|
Quote:
|
|
|
|