June 15, 2007, 04:14 PM | #1 |
Junior member
Join Date: March 22, 2007
Posts: 480
|
New Scope and GG&GMount
kinda nice having Fathers Day and a Wedding anniversary one day apart and getting your gifts before the event.
this is one of them http://www.gggaz.com/index.php?id=149&parents=38,55 this is the other http://http://www.badgerordnance.com/productgroup.php?id=rings# 4-16X50 30mm Mil Dot http://www.legacysports.com/products/nikko/index.html and these and this too, http://www.swfa.com/c-231-super-snip...le-scopes.aspx one of these and finally this too BUT !! the best thing was the GG&G 30mm and the Nikko Stirling scope, i mounted it on my LWRC ODA 5.56mm sighted in, first group from a 20 rnd. mag. using my reloads, kept all in 3", then run a mag. full of LC-00kept all in 3.5" group.., then come the acid test ! i wrote down the settings, activated the accu-cam lever and off came the scope, put it on my big boomer, .499LWR, fired several rounds till dead center was hit a few times then dumped 20 more rounds down range, then removed the scope from the .499LWR, mounted it back on the LWRC ODA 5.56mm, reset the the dials to former markings and fired 10 rounds before looking, all rounds were in a 2" group and about 2" high !! hows that for near pin point accuracy/return to zero ?? thanks to all who had a hand in the production of what i call a damn fine rifle, scope and mount..., i'll also take credit for some very good reloads... Last edited by Mach II Sailor; June 18, 2007 at 07:21 AM. Reason: no photos |
June 17, 2007, 08:33 AM | #2 |
Junior member
Join Date: March 22, 2007
Posts: 480
|
what did i do wrong here ?? none of the URLs worked and none of the pics showed up....
the best part of this new GG&G 30mm mount is that the threaded holes in the Aluminum base mount have helicoils !! no stripping of threads, this one peice mount is in my opinion the very best one can get for their AR-15s |
June 17, 2007, 11:25 PM | #3 |
Junior member
Join Date: May 31, 2004
Location: The Toll Road State, U.S.A.
Posts: 12,451
|
None of your links work, man. You've got two "http://"s on each of them - erase the first one...
|
June 18, 2007, 07:23 AM | #4 |
Junior member
Join Date: March 22, 2007
Posts: 480
|
how's it look now ? i am quite a dork when it comes to posting URLS and pics
|
Thread Tools | Search this Thread |
|
|