|
Forum Rules | Firearms Safety | Firearms Photos | Links | Library | Lost Password | Email Changes |
Register | FAQ | Calendar | Today's Posts | Search |
|
Thread Tools | Search this Thread |
September 18, 2017, 08:41 PM | #1 |
Senior Member
Join Date: December 12, 2012
Posts: 761
|
Overcharged load vs. squib load gun damage question.
I recently saw a video of a guy shooting a bolt action rifle over a sand bag. The rifle barrel split into and the shooter suffered a hand injury. There was much discussion over what went wrong, with most citing either a squib load or an overcharged load. My question is this. Wouldn't a squib load tend to split the barrel while an overcharged load tend to damage the bolt/chamber area? What damage would a case head separation tend to do?
|
September 18, 2017, 10:08 PM | #2 |
Senior Member
Join Date: June 17, 2010
Location: Virginia
Posts: 6,895
|
Split barrel = obstruction
|
September 18, 2017, 11:24 PM | #3 |
Senior Member
Join Date: August 25, 2008
Location: In the valley above the plain
Posts: 13,424
|
If the video you're referring to is one that I saw a couple hours ago, it was a Remington 700 Ultimate Muzzleloader.
Double-loaded (bore obstruction), according to the hints dropped by the person that recorded and witnessed the Kaboom. There are many factors and exceptions, but obstructions followed by full charges generally split barrels. Overcharges might also split barrels, but they generally just do very bad things by breaking bolts and injecting the shooter with molten metal.
__________________
Don't even try it. It's even worse than the internet would lead you to believe. |
September 19, 2017, 12:41 AM | #4 |
Senior Member
Join Date: November 13, 2006
Posts: 8,286
|
The one I just watched was a muzzleloader Rem 700.
In a cartridge rifle,most brass will not accept a gross overload of powder. It would certainly be possible to double charge a muzzle loader In a cartridge rifle."wrong powder" is a likely culprit for a blow up. |
September 19, 2017, 10:42 AM | #5 |
Senior Member
Join Date: September 12, 2015
Location: Issaquah WA. Its a dry rain.
Posts: 1,774
|
A squib alone wont do damage save for to tge shooters ego as he drives the slug out if the barrel. An overcharge is obvious in how it damages. Now a squib followed by another shot, that can get dangerous.
__________________
Just shoot the damn thing. |
September 20, 2017, 02:02 AM | #6 |
Staff
Join Date: March 11, 2006
Location: Upper US
Posts: 28,839
|
A double load in a muzzle loader usually isn't a disaster. A double CHARGE might be a different story.
I remember seeing an article in the Rifleman ages ago, they wound up having to do multiple loads, (something like 7, or maybe 11) before the barrel split. Some time ages ago, I was told, "You aren't a true muzzleloading fanatic until... You have loaded with no powder You have loaded with no ball You have double loaded and you have shot your ramrod, at least twice"... A burst barrel usually means an obstruction, like a squib bullet stuck in the bore, and then another round fired, which gets a running start before hitting the obstruction. The classic shotgun 12/20 burst is one example/
__________________
All else being equal (and it almost never is) bigger bullets tend to work better. |
September 20, 2017, 02:29 AM | #7 |
Senior Member
Join Date: November 13, 2006
Posts: 8,286
|
Remember most of what we know/believe about muzzle loaders has to do with true black powder and how it behaves.
Some of the non-traditional muzzle loader manufacturers have blessed the use of smokeless powder. A double charge of ffg may be far less spectacular than a double charge of 4198.(I don't know what smokeless gets used in muzzle loaders) |
September 21, 2017, 09:13 AM | #8 |
Staff
Join Date: November 2, 1998
Location: Colorado
Posts: 21,840
|
Never shot a ramrod.
I'm inclined towards a bore obstruction. The gases press against the bore obstruction and have to go somewhere. They banana peel the barrel.
__________________
Vigilantibus et non dormientibus jura subveniunt. Molon Labe! |
September 21, 2017, 09:32 AM | #9 |
Senior Member
Join Date: February 13, 2006
Location: Washington state
Posts: 15,248
|
If you take another look at the Remington 700 Ultimate blow-up, you will note that there is no white smoke from the shot. Since the owner's manual says to use black powder or Pyrodex, I assumed it was fired using smokeless powder, which it is not designed for. But who knows? Definitely an oopsie!
__________________
Never try to educate someone who resists knowledge at all costs. But what do I know? Summit Arms Services |
September 21, 2017, 09:36 AM | #10 |
Senior Member
Join Date: October 25, 2001
Location: Alabama
Posts: 18,542
|
Hard to obstruct a muzzleloader barrel in front of a charge except by short starting the ball. A friend's shiftless brother borrowed his TC, shot it foul, got a ball halfway down and shot it out. Left a goose egg bulge on the octagon barrel. TC replaced it but friend said it was not as accurate as the original.
I am thinking smokeless. |
September 21, 2017, 02:53 PM | #11 |
Senior Member
Join Date: August 25, 2008
Location: In the valley above the plain
Posts: 13,424
|
It may be of note that the ramrod is not visible under the barrel, on the bench, or in the shooting rest in the video.
__________________
Don't even try it. It's even worse than the internet would lead you to believe. |
September 21, 2017, 04:30 PM | #12 |
Senior Member
Join Date: October 25, 2001
Location: Alabama
Posts: 18,542
|
Hmm. Shooting the ramrod is not normally damaging to the gun. Of course smokeless behind the ramrod would be.
|
September 22, 2017, 04:38 PM | #13 | |
Member
Join Date: December 7, 2013
Posts: 52
|
Quote:
__________________
Laws do not prevent crime or lessen evil. They only allow crime to be identified and possibly punished. |
|
September 22, 2017, 07:39 PM | #14 |
Senior Member
Join Date: February 2, 2015
Location: Cottleville, Missouri
Posts: 1,115
|
Is shooting the ramrod out of a muzzle loader anything like firing a 22 mag bolt action with a laser bore sight still in the muzzle?
From experience I can tell you that when the aluminum shaft of the bore sight won't beat out of the end of the barrel, all you have to do is cut two inches off the barrel and re-crown it... no worries?
__________________
Vegetarian... primitive word for lousy hunter! |
September 22, 2017, 11:45 PM | #15 | |
Staff
Join Date: March 11, 2006
Location: Upper US
Posts: 28,839
|
Quote:
When a muzzloader "forgets" and shoots his ramrod, the rod is down the bore, in contact with the ball, so there is no "running start" for the ball (or bullet). So rather than acting like a bore obstruction (where the bullet gets a running start BEFORE hitting the obstruction), the ramrod just acts like an extra heavy bullet and is shot out (normally) without damage to the gun. There are Civil War (and other historical records) of combat with muzzle loaders where enemy troops were actually killed by ramrods "accidently" fired at them. Not a lot, but some...
__________________
All else being equal (and it almost never is) bigger bullets tend to work better. |
|
|
|