Finding Trigger Bar for FEG AP MBP

lemzq7 · July 3, 2017, 03:30 PM

I recently purchased an surplus FEG, Walther PP clone, the 32acp AP-MBP. The trigger didn't feel right. Long story short, my trigger bar is beat up and worn down. I took it to a gunsmith for repairs ($60), but he's backed up 6-8 weeks. I could take it somewhere else, but I figured I'd look for the part online until I find somebody to repair it.

The only place I could find it (buymilsurp.com) was out of stock. I've tried gunbroker, ebay, and other sites but can't find a trigger bar anywhere.

Does anyone know of an interchangeable gun that I could find parts for? Or a website where I could find parts?

**4V50 Gary** · July 4, 2017, 09:33 AM

Ever thought of making one? We were required to make parts when parts could not be bought. Post some pictures of one.

T. O'Heir · July 4, 2017, 12:26 PM

An FEG AP-MBP is the export version of the Hungarian Military PA-63 Pistol. Gunparts list some parts under Kassnar. One of which is a trigger bar at $35.00.
https://www.gunpartscorp.com/Products/468220B.htm

lemzq7 · July 4, 2017, 10:04 PM

The gunsmith was going to do some welding and add material where it's worn down.

Although I'll save some money and time and buy the part.

Thank you for the parts link!

BoogieMan · July 5, 2017, 01:12 PM

FYI- Buy the Wolf Spring kit for the PA63 if you havent already. Makes a night and day difference in the trigger and I have had no problems since replacing mine. I will say that these little guns are snappy in 9mak. Tend to be painful for more than a few rounds in the thumb web area.

July 3, 2017, 03:30 PM	#1
lemzq7 Junior Member Join Date: July 2, 2017 Posts: 2	Finding Trigger Bar for FEG AP MBP I recently purchased an surplus FEG, Walther PP clone, the 32acp AP-MBP. The trigger didn't feel right. Long story short, my trigger bar is beat up and worn down. I took it to a gunsmith for repairs ($60), but he's backed up 6-8 weeks. I could take it somewhere else, but I figured I'd look for the part online until I find somebody to repair it. The only place I could find it (buymilsurp.com) was out of stock. I've tried gunbroker, ebay, and other sites but can't find a trigger bar anywhere. Does anyone know of an interchangeable gun that I could find parts for? Or a website where I could find parts?

July 4, 2017, 09:33 AM	#2
4V50 Gary Staff Join Date: November 2, 1998 Location: Colorado Posts: 21,841	Ever thought of making one? We were required to make parts when parts could not be bought. Post some pictures of one. __________________ Vigilantibus et non dormientibus jura subveniunt. *Molon Labe!*

July 4, 2017, 12:26 PM	#3
T. O'Heir Senior Member Join Date: February 13, 2002 Location: Canada Posts: 12,453	An FEG AP-MBP is the export version of the Hungarian Military PA-63 Pistol. Gunparts list some parts under Kassnar. One of which is a trigger bar at $35.00. https://www.gunpartscorp.com/Products/468220B.htm __________________ Spelling and grammar count!

July 5, 2017, 01:12 PM	#5
BoogieMan Senior Member Join Date: April 4, 2012 Location: South Jersey Posts: 2,217	FYI- Buy the Wolf Spring kit for the PA63 if you havent already. Makes a night and day difference in the trigger and I have had no problems since replacing mine. I will say that these little guns are snappy in 9mak. Tend to be painful for more than a few rounds in the thumb web area. __________________ Concentrated power is not rendered harmless by the good intentions of those who create it. Milton Freidman "If you find yourself in a fair fight,,, Your tactics suck"- Unknown

July 4, 2017, 10:04 PM	#4
lemzq7 Junior Member Join Date: July 2, 2017 Posts: 2	The gunsmith was going to do some welding and add material where it's worn down. Although I'll save some money and time and buy the part. Thank you for the parts link!