Kriss Vector in a can

Ozzieman · May 6, 2016, 07:52 PM

I have a semi Kriss Vector carbine and I am thinking about my first can. The vector has the fake one on it. Anyone know if this is possible? Will I have to tap the barrel?
Thank you

waveslayer · May 7, 2016, 01:53 AM

You will need a guy to thread the barrel to the pitch of your can. I would recommend that you send the barrel off the guys that make the can. You don't want a baffle strike!

My wife thinks I only have 3 guns

jwise · June 26, 2016, 10:47 AM

Not gonna lie - it's easiest to start with the pistol version, register it as an SBR, and then add the can to the already threaded barrel. Removing these barrels require an act of God.

When you finish, you'll have something like this:

It's SO much fun to shoot!!

Ozzieman · June 26, 2016, 09:40 PM

Little late for that jwise, but thanks.
What magazine are you using on yours? That odd shape on the bottom side I don't recognize.

rjrivero · July 11, 2016, 09:57 PM

You can send your Vector back to the MFG and they'll pull the barrel for you. That's the best way to get this done.

jwise · August 20, 2016, 10:45 PM

Sorry- been busy lately. That's a KRISS magazine.

Ozzieman · August 28, 2016, 08:06 AM

Quote:

That's a KRISS magazine.

Thank you, I haven't seen a real Kriss 30 rounder. I have 5 aftermarket that have been working well.
Thanks

May 6, 2016, 07:52 PM	#1
Ozzieman Senior Member Join Date: December 14, 2004 Location: Northern Indiana Posts: 6,117	Kriss Vector in a can I have a semi Kriss Vector carbine and I am thinking about my first can. The vector has the fake one on it. Anyone know if this is possible? Will I have to tap the barrel? Thank you __________________ It was a sad day when I discovered my universal remote control did not in fact control the universe. Did you hear about the latest study.....5 out of 6 liberals say that Russian Roulette is safe.

June 26, 2016, 09:40 PM	#4
Ozzieman Senior Member Join Date: December 14, 2004 Location: Northern Indiana Posts: 6,117	Little late for that jwise, but thanks. What magazine are you using on yours? That odd shape on the bottom side I don't recognize. __________________ It was a sad day when I discovered my universal remote control did not in fact control the universe. Did you hear about the latest study.....5 out of 6 liberals say that Russian Roulette is safe.

Thread Tools	Search this Thread
Show Printable Version Email this Page	Search this Thread: Advanced Search

May 7, 2016, 01:53 AM	#2
waveslayer Senior Member Join Date: August 22, 2013 Posts: 246	You will need a guy to thread the barrel to the pitch of your can. I would recommend that you send the barrel off the guys that make the can. You don't want a baffle strike! My wife thinks I only have 3 guns

June 26, 2016, 10:47 AM	#3
jwise Senior Member Join Date: January 18, 2001 Location: Texas Posts: 677	Not gonna lie - it's easiest to start with the pistol version, register it as an SBR, and then add the can to the already threaded barrel. Removing these barrels require an act of God. When you finish, you'll have something like this: It's SO much fun to shoot!!

July 11, 2016, 09:57 PM	#5
rjrivero Senior Member Join Date: November 17, 2008 Location: NW Ohio Posts: 1,399	You can send your Vector back to the MFG and they'll pull the barrel for you. That's the best way to get this done.

August 20, 2016, 10:45 PM	#6
jwise Senior Member Join Date: January 18, 2001 Location: Texas Posts: 677	Sorry- been busy lately. That's a KRISS magazine.