Mossburg 535

yj94 · December 8, 2005, 11:47 PM

Does A Scope Base For A Moss 500 Fit A Moss 535?

n3twrkm4n · December 9, 2005, 07:17 AM

http://www.weaver-mounts.com/charts1.asp [Weaver Reference Chart]

Also

http://www.midwayusa.com/ebrowse.exe...=657***8705***

There are specific ones for the 500. I do not see the 535's listed on any websites yet, I think it might be because of the newness of the gun. the 535 ATS is new for 2005 so I'm not sure if you can get scope mounts for it.

You might get lucky and they fit though.

If not perhaps you know someone that can machine you new holes, the only problem is if the screw threads are different you will mess up the threads, unless you can get someone to re-tap the holes for you too.

I trust midwayusa to have something if it's available, either them or www.cheaperthandirt.com

yj94 · December 9, 2005, 12:42 PM

Thanks For The Info.

n3twrkm4n · December 9, 2005, 12:48 PM

No problem, Sorry more people haven't replied, usually people jump all over threads like this to prove someone wrong

Maybe the right person hasn't signed on yet but you might get more advise later on.

The other thing to look into is those sadles for shotguns that wrap around the receiver, I'm not sure what holes they use but that could be an option.

Or maybe a cantilever barrel, the ones with the little lever that hovers above the receiver so you can mount a scope to it.

I'm not sure what your intentions are but those are some more thoughts for you.

Have a good one.

yj94 · December 10, 2005, 05:41 PM

I Was Able To E-mail Weaver To Find Out They Said It Was The 417m,which Is The Same As The Pre 96 Moss 500 Use Thanks Again.

December 8, 2005, 11:47 PM	#1
yj94 Junior Member Join Date: December 8, 2005 Posts: 4	Mossburg 535 Does A Scope Base For A Moss 500 Fit A Moss 535?

December 9, 2005, 07:17 AM	#2
n3twrkm4n Senior Member Join Date: December 23, 2004 Posts: 629	http://www.weaver-mounts.com/charts1.asp [Weaver Reference Chart] Also http://www.midwayusa.com/ebrowse.exe...=657*8705* There are specific ones for the 500. I do not see the 535's listed on any websites yet, I think it might be because of the newness of the gun. the 535 ATS is new for 2005 so I'm not sure if you can get scope mounts for it. You might get lucky and they fit though. If not perhaps you know someone that can machine you new holes, the only problem is if the screw threads are different you will mess up the threads, unless you can get someone to re-tap the holes for you too. I trust midwayusa to have something if it's available, either them or www.cheaperthandirt.com __________________ There's no place like 127.0.0.1 > SELECT FROM users WHERE clue > 0 0 rows returned

December 9, 2005, 12:42 PM	#3
yj94 Junior Member Join Date: December 8, 2005 Posts: 4	moss 535 Thanks For The Info.

December 9, 2005, 12:48 PM	#4
n3twrkm4n Senior Member Join Date: December 23, 2004 Posts: 629	No problem, Sorry more people haven't replied, usually people jump all over threads like this to prove someone wrong Maybe the right person hasn't signed on yet but you might get more advise later on. The other thing to look into is those sadles for shotguns that wrap around the receiver, I'm not sure what holes they use but that could be an option. Or maybe a cantilever barrel, the ones with the little lever that hovers above the receiver so you can mount a scope to it. I'm not sure what your intentions are but those are some more thoughts for you. Have a good one. __________________ There's no place like 127.0.0.1 > SELECT FROM users WHERE clue > 0 0 rows returned

December 10, 2005, 05:41 PM	#5
yj94 Junior Member Join Date: December 8, 2005 Posts: 4	Moss 535 I Was Able To E-mail Weaver To Find Out They Said It Was The 417m,which Is The Same As The Pre 96 Moss 500 Use Thanks Again.