Forged Mega Lower paired with a Billet Mega Upper?

alaska_tac · May 8, 2013, 10:00 AM

I plan on buying a Forged Mega Lower and pairing it with a Billet Mega Upper the only thing im worried about is if it doesnt fit and or slop between the two recivers. Any information will help,
Thank you,
C

Lower-http://megaarms.com/ar-15/lower-receivers/forged-lower/
Upper-http://megaarms.com/ar-15/upper-receivers/billet-uppers/standard-billet-upper/

greentick · May 8, 2013, 10:51 AM

Send Mega an email. The few times I've contacted them they were fairly prompt in replying.

Quentin2 · May 9, 2013, 01:50 AM

Definitely check with Mega but I'd be shocked if it doesn't function well, though you'd normally expect a forged upper on a billet lower. The reverse should be fine.

I built up a Quentin Defense billet lower and my Daniel Defense, BCM and PSA forged uppers all fit it fine.

madcratebuilder · May 10, 2013, 06:19 AM

My Mega billet upper is a tight fit on all forged lowers it has been on, AXTS, PA and Mega. Mega makes a very nice product.

May 8, 2013, 10:00 AM	#1
alaska_tac Junior Member Join Date: May 8, 2013 Posts: 1	Forged Mega Lower paired with a Billet Mega Upper? I plan on buying a Forged Mega Lower and pairing it with a Billet Mega Upper the only thing im worried about is if it doesnt fit and or slop between the two recivers. Any information will help, Thank you, C Lower-http://megaarms.com/ar-15/lower-receivers/forged-lower/ Upper-http://megaarms.com/ar-15/upper-receivers/billet-uppers/standard-billet-upper/

May 8, 2013, 10:51 AM	#2
greentick Senior Member Join Date: January 15, 2011 Location: Deep South Posts: 261	Send Mega an email. The few times I've contacted them they were fairly prompt in replying. __________________ nous défions

Thread Tools	Search this Thread
Show Printable Version Email this Page	Search this Thread: Advanced Search

May 9, 2013, 01:50 AM	#3
Quentin2 Senior Member Join Date: June 18, 2009 Location: NorthWest USA Posts: 1,996	Definitely check with Mega but I'd be shocked if it doesn't function well, though you'd normally expect a forged upper on a billet lower. The reverse should be fine. I built up a Quentin Defense billet lower and my Daniel Defense, BCM and PSA forged uppers all fit it fine.

May 10, 2013, 06:19 AM	#4
madcratebuilder Senior Member Join Date: November 2, 2007 Location: Northern Orygun Posts: 4,923	My Mega billet upper is a tight fit on all forged lowers it has been on, AXTS, PA and Mega. Mega makes a very nice product.