The Firing Line Forums

Go Back   The Firing Line Forums > The Hide > The Art of the Rifle: General

Reply
 
Thread Tools Search this Thread
Old January 13, 2022, 08:28 PM   #1
xtriggerman
Member
 
Join Date: January 4, 2012
Posts: 43
Greener upgrade

What better way to save some money for a Christmas gift than to just do mostly gun work on a desired subject of the recipient, in this case my son. When we were in Sarco's show room a number of years ago, he spotted this Greener GP shotgun and they only wanted $275 for the danged thing! The gun was glued to his fingers as we checked out the rest of the stuff there. Well, the gun came with a 2 3/4" chambered 30" modifyed choke barrel and it was a take down model that is pretty interesting in its self. All you do is just loosen the screw head there by the forend and hand turn out the barrel. The screw acts as a simply clamp screw closing the receiver ring around a well fit barrel shank. He all ways thought having a Rifled 12 gauge barrel to swap in would make it a Really nice GP gun as was stamped on its side. Numrich had the Mossberg 512P barrel used and I was able to cut most all of the (bad idea) ports off for a handy 18 1/4" barrel length.
The scope base is a weaver that I was able to put 4, 8x40 screws into the beafy Mossberg 512 Rifled barrel. And that sits shouldered up to a High Standard pistol rear sight that comes with a 90 degree face as a recoil shoulder for the base and yet is usable as open sight with the orange bead up front.


Other extras include cutting the Original barrel down to 26" chambering it for 3" as well as for the 512 and putting a Win Choke II on the end. A 1" Pachmayr recoil pad in lew of the home made plastic thing that was there. A trigger job and fixing the safety so it wouldn't go into safe with each lever drop. Topped off with a 15 oz Vector 1-5 illuminated dot cross hair scope. Then the Rings were extensively worked over also. They used to be one piece with a single clamp in the middle. I cut the unit in half and milled each ring for weaver square cross pins and nuts. Now these rings seat the way they should with no re-zero needed between barrel swaps. All this was Christmas and Birthday gift from me since he turned 28 2 days ago. Needless to say he's thrilled with this General Purpose Greener Martini now! Its now nic named Thor.
xtriggerman is offline  
Old January 15, 2022, 10:13 AM   #2
BornFighting88
Senior Member
 
Join Date: August 1, 2021
Posts: 395
Nothing like a hand worked gift. Very cool. I love the SARCO showroom. It is very difficult for me to go in there and NOT come out with parts or another project. Much to my wife's chagrin sometimes.

That is a really nice project. There are gems in that place. I am looking for a beater shotgun to take for field days. So I don't beat up my Red Label. They have some Beretta x400 models for less than $400!! I am tempted to go and pick one up, even if I have to do some work to them. And Numrich is pretty well stocked with parts, so it would just be a time investment.

But that is not to take away from your achievement here. Very nice work, sir! Makes me want one!
BornFighting88 is offline  
Old January 15, 2022, 09:12 PM   #3
xtriggerman
Member
 
Join Date: January 4, 2012
Posts: 43
Thanks, and your not kidding about shotguns at the PA store! A person can randomly pick up so many used beat up guns of all sorts it can make your eyes dance! The only other place that beat Sarco out for guns on the open floor was Main's Kittery Trading Post. Gun candy land heaven!
xtriggerman is offline  
Reply

Thread Tools Search this Thread
Search this Thread:

Advanced Search

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off

Forum Jump


All times are GMT -5. The time now is 10:34 AM.


Powered by vBulletin® Version 3.8.7
Copyright ©2000 - 2022, vBulletin Solutions, Inc.
This site and contents, including all posts, Copyright © 1998-2021 S.W.A.T. Magazine
Copyright Complaints: Please direct DMCA Takedown Notices to the registered agent: thefiringline.com
Page generated in 0.03922 seconds with 10 queries