|
Forum Rules | Firearms Safety | Firearms Photos | Links | Library | Lost Password | Email Changes |
Register | FAQ | Calendar | Search | Today's Posts | Mark Forums Read |
|
Thread Tools | Search this Thread |
January 13, 2018, 03:58 PM | #1 |
Senior Member
Join Date: August 23, 2014
Location: Nevada/Ariz/CA
Posts: 1,753
|
Marbles tang sight elevation adjustment
I've installed Marbles tang peep sights on a .22 HP and a .250 Savage. One is working properly and the other does not work properly with the elevation adjustment. The threaded post holding the aperture will not remain steady but rotates when the elevation knob rotates. By holding the aperture steady, the post will move up and down with the adjustment knob. But the aperture and post will not remain steady on its own and just seems loose. Any suggestions as what needs to be done?
I've emailed Marbles but have not yet received a reply.
__________________
Ouch, the dreaded "M-1 thumb", you just know it will happen eventually, so why not do it now and get it over with?? |
January 13, 2018, 09:20 PM | #2 |
Senior Member
Join Date: February 13, 2006
Location: Washington state
Posts: 15,248
|
Call Marbles CS. The peep sight isn't supposed to rotate.
__________________
Never try to educate someone who resists knowledge at all costs. But what do I know? Summit Arms Services |
January 14, 2018, 09:21 AM | #3 |
Senior Member
Join Date: August 23, 2014
Location: Nevada/Ariz/CA
Posts: 1,753
|
Right on. By unscrewing the post it is apparent that something is missing to hold the post steady. It will have to go back for repair or replacement.
__________________
Ouch, the dreaded "M-1 thumb", you just know it will happen eventually, so why not do it now and get it over with?? |
Thread Tools | Search this Thread |
|
|