The Firing Line Forums

Go Back   The Firing Line Forums > The Hide > The Art of the Rifle: General

Reply
 
Thread Tools Search this Thread
Old February 7, 2020, 09:49 AM   #26
J.G. Terry
Senior Member
 
Join Date: January 24, 2014
Posts: 578
Personal Opinion-Shoot first: My hopes are that the pitting looks worse in the pictures than in real life. The edges look sharp. I'd be very selective about who did the bluing. The rifle has sharp edges and the screws look good. Ripples and dished out screw holes will make rifle worse. I would not use that cold blue stuff on anything as rifle would be better left in the white. One aspect that has not been discussed is the ruined wood. Getting the stock and forend replaced will make OP's rifle look 100% better.
__________________
Intentionally Antagonizing Another MemberInsults and Ad Hominems
J.G. Terry is offline  
Old February 27, 2020, 09:55 PM   #27
dakota.potts
Senior Member
 
Join Date: February 25, 2013
Location: Keystone Heights, Florida
Posts: 2,973
Opinion only:

I have rust blued a couple older guns that were hopelessly rusted and pitted. Hot blue is glaringly obvious when done over pitting. Rust blue will not cover up pitting, but being a softer matte blue, it will look better than the hot blue.

If it were on my bench to work on, I would strip all of the rust and not touch the metal - no hope in polishing out the pits. Just ensure a uniform base metal and rust blue it.

The stock really also needs a re-finish or a replacement.

They are beautiful and fascinating rifles, whether it's worth it is up to you. I would figure minimum $300-400 to rust blue the metal, more depending on the smith you go with.

I wouldn't touch it with cold blue. Someone mentioned Oxpho blue, and that's about the best of the best, but it's still cold blue. The difference is very obvious.
__________________
Certified Gunsmith
Certified Armorer - H&K and Glock Among Others
You can find my writings at my website, pottsprecision.com.
dakota.potts is offline  
Old February 27, 2020, 11:05 PM   #28
deadcoyote
Senior Member
 
Join Date: April 13, 2009
Location: northern CA
Posts: 610
I’d cerakote it with different shades of OD green tiger stripes. Just kidding, I’d honestly go shoot it the way it is to make sure it works first. I’m super jealous, always wanted a .35 Remington model 8 or 81.
deadcoyote is offline  
Old March 4, 2020, 08:00 PM   #29
Drm50
Senior Member
 
Join Date: November 10, 2014
Posts: 806
Taking in consideration the wood ( recoil pad ) the D&T for scope, sight base on rear of reciever is more D&T. I would shoot the rifle the way it is. Unless a gun like this has sentimental value the cost of a good refinish isn't practical. 8s are good rifles but if they have any problems parts are hard to come by. If it functions and shoots decent I would be happy to leave it alone and use as is.
Drm50 is offline  
Old March 5, 2020, 06:46 PM   #30
Cheapshooter
Senior Member
 
Join Date: December 2, 2007
Location: Missouri
Posts: 8,128
I'm in the "shoot and enjoy" camp. For a ocouple reasons. 1. No matter what you spend, and it could be quite a bit, it is never going to be a collector, or worth a fraction of what refinishing it properly will cost.
2. I enjoy old guns as is. Realizing the battle scars are all an important part of their history, and the history of the former owners.
My opinions only. It's your gun, and considering the current condition you aren't going to ruin any collector value. Nor increase it much either. But if it makes you happy to spruce it up, have at it.
__________________
Cheapshooter's rules of gun ownership #1: NEVER SELL OR TRADE ANYTHING!
Cheapshooter is offline  
Old March 12, 2020, 08:49 PM   #31
langenc
Senior Member
 
Join Date: August 19, 2007
Location: Montmorency Co, MI
Posts: 1,356
Query Remington and see what they would do for you..

Oxphoro paste is the best of the cold blues. It really aint past but is more like
pancake syrup but not so sticky in consistancy. It will do a so so job. Go to youtube for oxphoro blue application ideas. Best is probably w/ steel wool, believe it or not.

The pitting is a BIG problem. I once took a Ithaca for reblue. Some yahoo had taken a pipewrench and tried to remove the barrel. Gun came back pristine and about 1974 for $75.
langenc is offline  
Reply

Thread Tools Search this Thread
Search this Thread:

Advanced Search

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off

Forum Jump


All times are GMT -5. The time now is 10:15 AM.


Powered by vBulletin® Version 3.8.7
Copyright ©2000 - 2020, vBulletin Solutions, Inc.
This site and contents, including all posts, Copyright © 1998-2018 S.W.A.T. Magazine
Copyright Complaints: Please direct DMCA Takedown Notices to the registered agent: thefiringline.com
Contact Us
Page generated in 0.05284 seconds with 8 queries