March 9, 2011, 09:04 PM | #1 |
Member
Join Date: May 27, 2010
Location: Houston TX
Posts: 58
|
Lee 124gr TC {TL}
Ok so I just cast my first bullets this week. I have a few different molds i am trying. The first one up is the lee 124gr TC tumble lube. I cannot for the life of me find anyone who has loaded this before. I am looking at 4.5gr of power pistol with a 1.050 OAL. My only problem is this should be a safe load but I have doubts since i have never loaded anything other than 115 jacked rounds for 9mm. They are running 124gr spot on and OAL of .575 and this puts around .246 inside the jacket if loaded to the last band. Any and all help is appreciated.
|
March 9, 2011, 11:15 PM | #2 |
Senior Member
Join Date: December 23, 2009
Location: foot of the uintas
Posts: 148
|
I load it over tightgroup with good results. I don't have the specifics neer me right now but can pm you in the morning if you are interested.
|
|
|