January 4, 1999, 10:20 AM | #1 |
Member
Join Date: January 4, 1999
Posts: 17
|
Can anybody give me their recommendations for a good clean burning powder for 9mm and 45 auto pistols. I am presently using Bullseye and it seems rather dirty. Also, what is a good mail order source for powder, primers and bullets?
Thanks |
January 4, 1999, 10:52 AM | #2 |
Staff Alumnus
Join Date: October 12, 1998
Location: Missouri
Posts: 1,992
|
Currently use Vita Vourhi N350. Also liked W231.
|
January 4, 1999, 12:40 PM | #3 |
Senior Member
Join Date: December 28, 1998
Location: riverdale,ut,usa
Posts: 136
|
I have been using Universal clays for some time now for 9mm, 44 Special and 45 auto and have had good results. It will achive max. velocity and is clean burning. Approximately same burninmg rate as Unique, my old standby.
|
January 4, 1999, 08:27 PM | #4 |
Member
Join Date: October 31, 1998
Location: Grand Forks, ND, USA, NA
Posts: 53
|
HP-38 is another good one! Similar to the W-231!
Plainsman :-) |
January 4, 1999, 11:02 PM | #5 |
Senior Member
Join Date: December 17, 1998
Posts: 1,885
|
In 9mm try Win 231. For .45 target loads try Win Super Target (WST). For full power .45 loads - AA #5
|
January 9, 1999, 12:29 PM | #6 |
Member
Join Date: November 13, 1998
Location: Mpls, Minn
Posts: 56
|
Found the Clays work well in my .45acp.
I was told to try Accurate #7 in my .38 Super but was also told it was a dirty powder???? anybody using it? thanks |
January 18, 1999, 11:32 PM | #7 |
Senior Member
Join Date: November 3, 1998
Location: Alamo, CA
Posts: 424
|
I have found Hodgdon HS-6 to be very reliable and accurate with moderate to full loads in the 9mm and .45 ACP. In fact, Hodgdon lists +P loads using this powder in the .45 ACP caliber. The spherical powder flows easily through the powder measure, and the powder is fairly clean burning. I have found the use of magnum primers to be unnecessary. It is also available in 8 lb. kegs, which makes it very economical.
I have tried Bullseye, Unique, and W231, but prefer the HS-6. Walt |
January 19, 1999, 08:50 AM | #8 |
Member
Join Date: January 18, 1999
Location: Joensuu, Finland
Posts: 24
|
I've been using Vihtavuori N320 in .45 auto and it seems OK, gun doesn't get dirty.
I use Win.primers, 200gr. plated bullets and near max.loads (check www.vihtavuori.fi for data). |
January 19, 1999, 12:43 PM | #9 |
Senior Member
Join Date: January 19, 1999
Location: Texas
Posts: 107
|
Hi guys, this is my first post to this section - been over on Glock talk mostly. I like Walt Welch's suggestion of HS-6. It is excellent for most all handgun loads, meters well, and is not as dirty as the Accurates and generates fairly low pressures for most applications. By far the cleanest powder I have used is Universal, though the Vihtavouri powders are also very clean by virtue of being single based. If clean is your main objective, use Universal or Vihtavouri.
|
Thread Tools | Search this Thread |
|
|