|
|
|||||||
| Forum Rules | Firearms Safety | Firearms Photos | Links | Library | Lost Password | Email Changes |
| Register | FAQ | Calendar | Today's Posts | Search |
 |
|
|
Thread Tools | Search this Thread |
October 10, 2002, 04:05 PM
|
#1 |
|
Senior Member
Join Date: January 23, 2002
Location: Wyoming
Posts: 132
|
Anyone use AA 2015 in 45-70?
I've read some Internet articles of using Accurate Arms 2015 and 350 gr. bullets in my 45-70. Some of the loads seemed rather hot but carried the expected disclamier to start 10% below listed loads and work up.
Anyone out here use this powder and if so, how did it perform? Over on Marlin talk there seems to be a strong following for Reloader #7. Any thoughts? |
|
|
October 10, 2002, 08:34 PM
|
#2 |
|
Senior Member
Join Date: August 13, 2001
Location: Montana
Posts: 489
|
Depending on what you are using for a firearm...
AA-2015 From 46.0 grains to 60.0 grains Winchester WLR Primer RL-7 From 38.3 grains to 55.5 grains Winchester WLR Primer But I like: IMR-4198 From 32.0 grains to 53.3 grains Winchester WLR Primer
__________________
http://stevespages.com/page8.htm |
|
|
|
October 11, 2002, 06:00 PM
|
#3 |
|
Member
Join Date: September 24, 2002
Location: Mesa, Arizona
Posts: 62
|
I use the Hornady 350 gr RN in my 1895LTD 46-70.
My best loading is with VithaVuori N133 powder and a standard primer. RL-7 is OK, AA2015BR did great (but ran out of it), H332 & 335 were on par with RL-7. 303l and 4198 didn't seem to be as good as the others.
__________________
Keep off the Ridgeline |
|
|
|
|
|
