January 2, 2007, 04:34 PM | #1 |
Member
Join Date: January 2, 2007
Location: Marietta, GA
Posts: 97
|
Pocket Lite problem
My 380 pocketlites slide locks up like it has run empty but still has bullets in the mag. When this happens the slide lock up pin is popping out slightly. If anybody knows what might have happened please let me know.
|
January 2, 2007, 06:34 PM | #2 |
Senior Member
Join Date: August 24, 2001
Location: LC, Ca
Posts: 1,917
|
I would guess the slide stop nose is too long. Bullets are hitting the slide stop nose as the slide cycles.
Remove the slide & barrel assembly. Install the slide stop into the frame. Insert a loaded mag into the frame. Push a couple cartridges out of the magazine using your thumb to simulate the slide while closely watching the nose of the slide stop. If you see interference, shorten the slide stop nose by a couple file strokes and re-test. Take care not to take too much material off or the magazine follower will not be able to trip the slide stop when the mag is empty. |
Thread Tools | Search this Thread |
|
|