|
Forum Rules | Firearms Safety | Firearms Photos | Links | Library | Lost Password | Email Changes |
Register | FAQ | Calendar | Today's Posts | Search |
|
Thread Tools | Search this Thread |
May 19, 2010, 02:58 PM | #1 |
Member
Join Date: January 3, 2010
Location: Carbondale
Posts: 60
|
93 mauser action screw thread
I'm building a 93 mauser action (haven't done one of these in a while) and I need some custom length action screws. Does anyone out there remember the thread pattern. If I have the numbers I can cut them on my lathe. They are about 1/4 X 22tpi but thats just a guess. Please someone post the correct thread pattern so I can do it right.
Dave |
May 19, 2010, 06:14 PM | #2 |
Member In Memoriam
Join Date: March 17, 1999
Posts: 24,383
|
Your guess is correct, or as close as you can get.
Jim |
May 20, 2010, 08:02 PM | #3 |
Senior Member
Join Date: December 4, 1999
Location: WA, the ever blue state
Posts: 4,678
|
The bottom metal will not work right for feeding if the longer or shorter screws are needed.
|
May 20, 2010, 08:08 PM | #4 |
Member
Join Date: January 3, 2010
Location: Carbondale
Posts: 60
|
Thanks guys, I will try the 1/4 x 22 and see how it goes. No worries about the bottom metal. Not using it anyway. Totally custom application. May post some pictures later.
Dave |
|
|