Need part for a Colt DA 38

Michael O. · February 13, 2013, 07:31 AM

I have a Colt DA 38 that has a spring missing from the hand assembly. I've looked everywhere I could find on the internet but have had no success. Could someone please help me locate a sight that might have one. Thanks

Whirlwind06 · February 13, 2013, 10:25 AM

Did you check
http://www.gunpartscorp.com/

also
www.jackfirstgun.com

James K · February 13, 2013, 11:52 AM

Colt made several guns that they just marked Colt DA 38. Is it the swing cylinder gun with two rows of cylinder stop notches? If so, the springs are not sold separately by Gun Parts, only the hand assembly. The springs are easily made from a piece of thin flat spring stock.

Jim

February 13, 2013, 07:31 AM	#1
Michael O. Junior Member Join Date: February 12, 2013 Posts: 1	Need part for a Colt DA 38 I have a Colt DA 38 that has a spring missing from the hand assembly. I've looked everywhere I could find on the internet but have had no success. Could someone please help me locate a sight that might have one. Thanks

February 13, 2013, 10:25 AM	#2
Whirlwind06 Senior Member Join Date: March 3, 2006 Location: NE Ohio Posts: 998	Did you check http://www.gunpartscorp.com/ also www.jackfirstgun.com

February 13, 2013, 11:52 AM	#3
James K Member In Memoriam Join Date: March 17, 1999 Posts: 24,383	Colt made several guns that they just marked Colt DA 38. Is it the swing cylinder gun with two rows of cylinder stop notches? If so, the springs are not sold separately by Gun Parts, only the hand assembly. The springs are easily made from a piece of thin flat spring stock. Jim