Thought Chamfers lasted forever - Page 2

cw308 · November 10, 2018, 09:36 AM

I just want to thank all of you for all your help full advise .

Chris

pete2 · November 10, 2018, 11:01 AM

I've had the same tool since about 1970, still works fine. I've even chucked it in my drill and removed primer pocket crimps, still going strong.

Metal god · November 10, 2018, 11:55 AM

Quote:

I've had the same tool since about 1970, still works fine.

Well I think we all know they don't make tools like they used to or China doesn't make tools like they used to

cw308 · November 10, 2018, 12:37 PM

I went with the Hornady Deluxe 4 pronged outside chamfer , hopefully it's not made in China .

**Unclenick** · November 10, 2018, 03:41 PM

This should last a while if you don't drop it.

cw308 · November 10, 2018, 05:59 PM

I do have the RCBS VLD and a Sinclair inside chamfer also the Sinclair is more like a very sharp pointed cone . I start with a few turns with the VLD , finish it off with the standard chamfer inside an out , it seems to smooth more the shave , that's why I ordered a new one .

November 10, 2018, 03:41 PM	#30
Unclenick Staff Join Date: March 4, 2005 Location: Ohio Posts: 15,364	This should last a while if you don't drop it. __________________ Gunsite Orange Hat Family Member CMP Certified GSM Master Instructor NRA Certified Rifle Instructor NRA Benefactor Member and Golden Eagle

Thread Tools	Search this Thread
Show Printable Version Email this Page	Search this Thread: Advanced Search

November 10, 2018, 09:36 AM	#26
cw308 Senior Member Join Date: September 2, 2010 Location: Plainview , Long Island NY Posts: 2,974	I just want to thank all of you for all your help full advise . Chris

November 10, 2018, 11:01 AM	#27
pete2 Senior Member Join Date: May 15, 2012 Location: Texas Posts: 1,791	I've had the same tool since about 1970, still works fine. I've even chucked it in my drill and removed primer pocket crimps, still going strong.

November 10, 2018, 12:37 PM	#29
cw308 Senior Member Join Date: September 2, 2010 Location: Plainview , Long Island NY Posts: 2,974	I went with the Hornady Deluxe 4 pronged outside chamfer , hopefully it's not made in China .

November 10, 2018, 05:59 PM	#31
cw308 Senior Member Join Date: September 2, 2010 Location: Plainview , Long Island NY Posts: 2,974	I do have the RCBS VLD and a Sinclair inside chamfer also the Sinclair is more like a very sharp pointed cone . I start with a few turns with the VLD , finish it off with the standard chamfer inside an out , it seems to smooth more the shave , that's why I ordered a new one .