January 26, 2014, 05:07 PM | #1 |
Senior Member
Join Date: February 7, 2007
Location: Mesa, Az
Posts: 358
|
S&W 342???
I got a great deal on a 342ti today. Basically got it instead of a 642. I like the under lug barrel and pinned front sight. But other than being scandium with a ti cylinder I can't really find much info on it. Seems like people really like them. Is there any special care I need to take for the ti cylinder? What is everyone's opinion of this little gun?
__________________
Keep your booger hook off the bang switch until the irons on the target |
January 26, 2014, 07:12 PM | #2 |
Senior Member
Join Date: September 23, 2006
Location: Alexandria, VA
Posts: 5,210
|
I carried one for a few years and I was amazed much difference a few ounce of weight can make in recoil. My 342 was brutal to shoot with even standard pressure ammo; with plus p's it was down right miserable. However, the airweights I owned were a lot easier to shoot and only weighted a few ounces more. As for cleaning and care, I just used regular hopps and no brushes on the cylinder.
|
January 26, 2014, 09:56 PM | #3 |
Member In Memoriam
Join Date: March 17, 1999
Posts: 24,383
|
The problem with ultra light guns is not that they might be uncontrollable in an emergency (under stress, people often don't notice noise or recoil) but that owners won't be able to practice enough to use them effectively. A gun that causes its owner to wince just looking at it might not be the best choice for carry, even though it is very light.
Jim |
January 26, 2014, 10:06 PM | #4 |
Senior Member
Join Date: February 7, 2007
Location: Mesa, Az
Posts: 358
|
I love how light it is. My regular carry gun is a 640-1. As such I am not so worried about recoil. But it is hard to trust that it is still there. It's so light compared to my 640-1 that keep wondering if I dropped it.
__________________
Keep your booger hook off the bang switch until the irons on the target |
January 26, 2014, 10:52 PM | #5 |
Senior Member
Join Date: October 20, 2007
Location: Richardson, TX
Posts: 7,523
|
It's been reported that the 342ti is THE lightest .38Spl revolver S&W has ever sold. I've actually never seen one, but I've handled the very similar 337ti, and I'm tempted to believe it! The frame actually has a groove down the backstrap to lighten it even more.
These revolvers are so light that S&W marked the barrels of some variants with .38 SPL +P JACKETED. The reason for the peculiar "jacketed" label is that +P loads with soft lead bullets (e.g. the Remington LSWCHP "FBI load") apparently have a tendency to jump crimp and lock up the gun; its recoil is that severe!
__________________
"Smokey, this is not 'Nam. This is bowling. There are rules... MARK IT ZERO!!" - Walter Sobchak |
January 26, 2014, 11:10 PM | #6 |
Senior Member
Join Date: February 7, 2007
Location: Mesa, Az
Posts: 358
|
__________________
Keep your booger hook off the bang switch until the irons on the target |
January 26, 2014, 11:13 PM | #7 |
Senior Member
Join Date: February 7, 2007
Location: Mesa, Az
Posts: 358
|
Mine has the groove in the blackstrap, and the trigger guard. It is steps on the barrel just like you said
__________________
Keep your booger hook off the bang switch until the irons on the target |
January 26, 2014, 11:22 PM | #8 |
Member In Memoriam
Join Date: March 17, 1999
Posts: 24,383
|
I considered myself pretty competent with my carry gun, a 3" barrel all steel Model 36, but it took me a whole lot of ammo to get that way. A lot of it was wadcutter, but I fired a goodly amount of standard and +P loads as well (and some a lot hotter than +P).
I wonder how many rounds owners of those ultra-lights will fire in order to become competent with those guns (and the nearly as light ones in .357). Jim |
January 26, 2014, 11:41 PM | #9 |
Senior Member
Join Date: February 7, 2007
Location: Mesa, Az
Posts: 358
|
I am defiantly going to buy some springs for it cause the trigger is no where near as nice as my 640. The recoil doesn't seem any worse than the 640. However it does make me know for certain that I no longer want to own a 340. I can't imagine shooting a gun this light in .357
__________________
Keep your booger hook off the bang switch until the irons on the target |
January 27, 2014, 12:26 AM | #10 |
Senior Member
Join Date: February 22, 2011
Posts: 582
|
My 351C has the backstrap and trigger guard carved out like that to save weight too. It weighs 11.5 oz and is pretty snappy even with .22 magnums. .38 Special in a gun that light would not be pleasant, for me anyway.
|
January 27, 2014, 07:13 AM | #11 |
Senior Member
Join Date: October 18, 2008
Location: Downeast Maine
Posts: 1,836
|
Don't use anything abrasive to clean the cylinder, it will damage or remove the grey coating and the titanium underneath will get eaten away when you shoot it. Those cylinders cannot be replaced, S&W doesn't have anymore and isn't making them.
__________________
"If violent crime is to be curbed, it is only the intended victim who can do it. The felon does not fear the police, and he fears neither judge or jury. Therefore what he must be taught to fear is his victim." - LtCol Jeff Cooper |
January 27, 2014, 07:32 AM | #12 |
Senior Member
Join Date: February 4, 2001
Posts: 956
|
I've got a 642, and looking at your gun made me envious, even while it made the web of my shooting hand sympathetically ache.
Larry
__________________
He who fights and runs away had better run pretty damn fast. Government, Anarchy and Chaos |
Thread Tools | Search this Thread |
|
|