|
Forum Rules | Firearms Safety | Firearms Photos | Links | Library | Lost Password | Email Changes |
Register | FAQ | Calendar | Search | Today's Posts | Mark Forums Read |
|
Thread Tools | Search this Thread |
January 30, 2019, 12:51 PM | #1 |
Senior Member
Join Date: July 1, 2001
Posts: 6,323
|
Hornady LNL Progressive Press Conversion - Worth it
I have a Hornady LNL Progressive about an 5000. I have loaded on it for about 16 years. I have some issues with the ejector wire and the priming and now the powder measure. Nothing bad, but it is getting to be enough that I wonder how a new press would be or converting mine.
I have the stuff in a shopping cart....it is a little over $150. Then I wonder...Has anybody else converted? Any issues? Any reason to buy new at $400? Economics look like: Convert: Buy ram head- $80 Buy powder linkage- $65 Exchange shell plates- $10x5 Net - $195 Convert to new: Sell press - $150 Buy press - $400 Exchange shell plates- $10x5 Net - $300 |
January 30, 2019, 02:00 PM | #2 |
Senior Member
Join Date: January 20, 2009
Location: Overlooking the Baker River Valley
Posts: 1,723
|
I've had my LNL AP for about 10 years. I never was able to get the wire ejector to work properly, so when the conversion became available I made the switch and the press has operated fine ever since. I had a little trouble with priming when I first got it, but made a simple adjustment and that has operated fine since as well. Have not had any trouble with the powder measure or linkage, so can't offer anything there.
__________________
NRA Benefactor Life Member NRA Certified Instructor: Rifle, Pistol, Shotgun, PPIH, Metallic & Shotgun Shell Reloading; RSO Pemigewasset Valley Fish & Game Club |
January 30, 2019, 06:15 PM | #3 |
Senior Member
Join Date: July 1, 2001
Posts: 6,323
|
Thanks. I figured it would....it’s just a bolt on, right?
|
January 31, 2019, 11:37 AM | #4 |
Senior Member
Join Date: January 20, 2009
Location: Overlooking the Baker River Valley
Posts: 1,723
|
Yes - simple. Just a couple of set screws, if I remember correctly.
__________________
NRA Benefactor Life Member NRA Certified Instructor: Rifle, Pistol, Shotgun, PPIH, Metallic & Shotgun Shell Reloading; RSO Pemigewasset Valley Fish & Game Club |
January 31, 2019, 11:40 AM | #5 |
Senior Member
Join Date: September 6, 2006
Location: Great state of Texas
Posts: 1,077
|
I've got the predecessor to the LNL... a ProJector. I've been loading on it for about 25 years. It's had it's moments... to include the ejector and primer feed... much of it from simple wear and tear. If they make a conversion kit, I'd be all over it; the Hornady is a solid press and worth the upgrade.
__________________
_______________ "I have this pistol pointed at your heart!" "That is my least vulnerable spot." |
January 31, 2019, 04:31 PM | #6 |
Senior Member
Join Date: November 28, 2014
Posts: 442
|
Only you can say if the upgrades are worth the price.
When I bought my first Dillon in 2003 I looked at the LNL. The biggest reason I didn't go with the LNL was because the expanding and powder drop took 2 stations as opposed to Dillon using one. After buying the Dillon a few months later Hornady came out with an upgrade to allow both steps on one station. Of course at owners expense. Then the shellplates were changed again at the owners expense. I think the LNL is a good press but in 15 years I've not had to spend any money on upgrades for my Dillon presses.
__________________
The 6 gun was once as common as the cellphone is today, and just as annoying when it went off in the theater. |
January 31, 2019, 09:16 PM | #7 | |
Senior Member
Join Date: September 6, 2006
Location: Great state of Texas
Posts: 1,077
|
Quote:
I bought the Hornady because it HAD 5 stations... allowing the use of a separate crimp die along with everything else. I don't see how you would need more than 5 stations...
__________________
_______________ "I have this pistol pointed at your heart!" "That is my least vulnerable spot." |
|
January 31, 2019, 09:47 PM | #8 |
Senior Member
Join Date: November 28, 2014
Posts: 442
|
I remember when I looked at the LNL it took 1 station to flair the case and the next station to drop the powder. Wasn't till after I bought the Dillon that they combined the two stations as the Dillon did. You didn't need to convert but it made sense to.
I don't remember why the shellplates were changed later on as I'm going on memory from some time ago. I think the ejector system was changed. Didn't mean you had to go out and buy the new plates but why wouldn't you stay current.
__________________
The 6 gun was once as common as the cellphone is today, and just as annoying when it went off in the theater. |
February 1, 2019, 11:32 AM | #9 | |
Senior Member
Join Date: January 20, 2009
Location: Overlooking the Baker River Valley
Posts: 1,723
|
Quote:
__________________
NRA Benefactor Life Member NRA Certified Instructor: Rifle, Pistol, Shotgun, PPIH, Metallic & Shotgun Shell Reloading; RSO Pemigewasset Valley Fish & Game Club |
|
February 1, 2019, 04:21 PM | #10 | |
Senior Member
Join Date: July 1, 2001
Posts: 6,323
|
Quote:
Correct me if i’m Wrong, but Dillon design went 550, 1050, 650, 450, square deal, didn’t it? Dillon makes a fine product, but to beat the Hornady, they made the 650. It is fine, but way more expensive in initial cost and in caliber change cost. That said, Hornady had some minor weaknesses that were fundamental to the press and cause this major overhaul kit to be available. I’m pretty happy I can convert for $150ish......depending on the results. |
|
February 16, 2019, 01:45 PM | #11 |
Senior Member
Join Date: July 1, 2001
Posts: 6,323
|
Well, the conversion is complete for the press head and priming system. I loaded up 25 38 spcl test loads. There was some learning curve, i admit. The primers were harder to get in the tube, but i should be able to improve my speed Feeding the primer tube on the press is more risky in terms of spilling primers, but primer seating is soooo much smoother and more positive.
Case ejection from the press is also much smoother. This is the real benefit and it is good. Can’t wait to load more! Glad I could upgrade in stead of buying all new... |
February 16, 2019, 09:46 PM | #12 |
Senior Member
Join Date: July 4, 2012
Location: south west iowa
Posts: 104
|
Well, Nathan good buy. I was going to chime in but FlyFish had everything covered.
Now, The bad news you are not going to believe how much that measly $150.00 is going to cost you. It won't be long until you realize that you are "just" going to need a case feeder, then a bullet feeder, then you might as well get the Deluxe control panel. Then you will realize that that rifle bullet feeder is a must have. |
February 17, 2019, 07:31 AM | #13 |
Senior Member
Join Date: July 1, 2001
Posts: 6,323
|
^^^I know. Don’t tempt me!
|
February 19, 2019, 10:44 AM | #14 |
Senior Member
Join Date: September 6, 2006
Location: Great state of Texas
Posts: 1,077
|
Simplicity is it's own reward sometimes!
I'm still rocking my ProJector after over 25 years... unmolested and un-hunked up with junk like a mall ninja's AR. Glad the conversion kit is working well!
__________________
_______________ "I have this pistol pointed at your heart!" "That is my least vulnerable spot." |
Thread Tools | Search this Thread |
|
|