|
Forum Rules | Firearms Safety | Firearms Photos | Links | Library | Lost Password | Email Changes |
Register | FAQ | Calendar | Today's Posts | Search |
|
Thread Tools | Search this Thread |
December 24, 2009, 03:07 AM | #1 |
Member
Join Date: April 19, 2006
Posts: 50
|
Issues with MTM 44 mag case...
Basically I cant get my 44 mag reloads to fit in any of these new plastic mtm cases I bought.
The factory 300grn 44mag rounds I have left fit in slightly easier but still wont go all the way down. So how hard should it be to stick these things in there. I did a pretty hard crimp on these and pushing as hard as I can it feels like I might actually set the bullet in deeper. I can't get all the rounds all the way down in these damn cases. Any better options? |
December 24, 2009, 04:22 AM | #2 |
Senior Member
Join Date: November 17, 2008
Location: gulf of mexico
Posts: 2,716
|
buy the right sized cases?
__________________
There is only one tactical principle which is not subject to change. It is to use the means at hand to inflict the maximum amount of wound, death, and destruction on the enemy in the minimum amount of time." |
December 24, 2009, 10:39 AM | #3 |
Junior member
Join Date: November 28, 2001
Location: West Tennessee
Posts: 4,300
|
What do the boxes say on the top? You are loading the boxes bullet down, right?
|
December 24, 2009, 10:03 PM | #4 |
Senior Member
Join Date: August 1, 2007
Location: Tabor City , NC.
Posts: 1,969
|
Send em to me & I`ll use em for 357 mag!!!
$1.00 apeice & shippin???? How much & where to send$$ MERRY CHRISTMAS!!!
__________________
GP100man |
December 25, 2009, 12:03 PM | #5 |
Member
Join Date: April 19, 2006
Posts: 50
|
...
Bullet down to make it work, but I'm trying to find something more secure.
It seems like the best option is an old case of factory ammo, it doesn't look as nice but the styrofoam seems to work best. I'm just paranoid about changing the COAL, especially on uncrimped cartridges. |
December 25, 2009, 10:02 PM | #6 |
Senior Member
Join Date: May 7, 2009
Location: Western Arkansas
Posts: 273
|
I have to ask again, are you sure that you have the right boxes? I have 5 of the MTM 44 Mag cases. The rounds just drop in with no resistance. What does the writing on the top of the box say?
|
December 26, 2009, 11:32 PM | #7 |
Member
Join Date: April 19, 2006
Posts: 50
|
...
It says 44 mag, and they do fit, I just meant finding a case where they don't have to sit upside down.
Mainly because on long bumpy trips I'm worried about the COAL being affected. So either a case that has some sort of tention to hold them in place or if they are loose in the case like the mtm cases, maybe a piece of foam where the bullets would impact when moving around... |
December 27, 2009, 12:46 AM | #8 | |
Senior Member
Join Date: July 8, 2008
Location: 8B ID
Posts: 1,753
|
Quote:
__________________
The answer to 1984 is 1776 |
|
December 27, 2009, 10:05 AM | #9 |
Junior member
Join Date: November 28, 2001
Location: West Tennessee
Posts: 4,300
|
Bumpy roads are not going to affect your overall length unless your expander plug is too large, which is a problem anyway. I've probably got at least 20 of these boxes and they work perfectly. If you're dead set of doing it your way, get those made for the .475. They will have enough room for the case heads but they'll be extremely wobbly.
|
December 27, 2009, 10:16 AM | #10 |
Senior Member
Join Date: December 24, 2008
Location: Loveland, CO
Posts: 1,476
|
And if the bumpy road did affect the length, it would be worse bullet up. Since that has the greatest density, having it on top would be the worst case scenario.
|
December 27, 2009, 10:38 AM | #11 |
Senior Member
Join Date: July 31, 2000
Location: Middle Peninsula, VA
Posts: 1,588
|
Easy, carry the box upside down.
|
December 27, 2009, 10:47 AM | #12 |
Senior Member
Join Date: March 7, 2009
Location: South East Queensland, Australia
Posts: 1,513
|
Bugga
You beat me to it Griz
If you crimp the rounds properly, you shouldnt have any problem with the coal changing. If it were possible to move the projectile in the case further once the round is complete, you have done something wrong If the projectile is loose, it (the projectile) could fall out of its case in your pocket or the projectile might move when leaving magazine to chamber.... or worse, the projectile fall out of the case on recoil inside the mag Just do like the rest of us, i reckon.... learn to reload properly, then throw them in your range cases where they bounce all around the trunk (and fall out of the range cases) then drop the range cases as you get them out of the trunk.... then, after picking them all up yet again, blow the dust off them and start shootin' em Learn to reload correctly is the answer, then you will trust your reloads, IMO
__________________
Muzza If you cant blind them with brilliance, Baffle them with BS Be alert...... there is a shortage of LERTs |
December 27, 2009, 09:22 PM | #13 | |
Senior Member
Join Date: September 15, 2005
Location: Oregon
Posts: 1,033
|
Quote:
|
|
December 28, 2009, 10:38 AM | #14 |
Senior Member
Join Date: December 1, 2002
Posts: 2,832
|
"It says 44 mag, and they do fit, I just meant finding a case where they don't have to sit upside down."
That ain't the way it's done. "Mainly because on long bumpy trips I'm worried about the COAL being affected." If your bullets are that loose in the cases, the first shot from a cylinder full will pull all the rest of them anyway! |
December 28, 2009, 07:54 PM | #15 |
Senior Member
Join Date: May 7, 2009
Location: Western Arkansas
Posts: 273
|
If you really want a bullet box to protect the bullets. Then maybe you want something like this. http://www.midwayusa.com/viewproduct...tnumber=778557
I know these come by the hundred, but they do sell smaller quainties. You will just have to look. EDIT: here is a link to a smaller quainty. http://www.midwayusa.com/viewProduct...tNumber=759153 |
|
|