The Firing Line Forums

Go Back   The Firing Line Forums > The Hide > NFA Guns and Gear

Reply
 
Thread Tools Search this Thread
Old February 14, 2014, 06:10 PM   #1
lonestar903
Junior Member
 
Join Date: February 13, 2014
Posts: 1
Muzzle adapters/Flash Hiders/Suppressors

I've a Golani Sporter, had it for years now. Getting ready to run an SWR Specwar 762 on it and would like to also use their Trifecta RS 556 Flash hider. The FH is 1/2x28 and I've found an adapter from M13 x 1RH to 1/2x28 and if necessary a 1/2x28 jam nut .. Would there be a problem running so many muzzle devices between the suppressor and the actual barrel itself?

My other option would be to have the bbl cut to 14" and perm weld the Trifecta to bring it back to legal length. Kinda don't want to get it cut but any help will be appreciated.

Thanks.

-JR
lonestar903 is offline  
Old February 14, 2014, 08:51 PM   #2
Theohazard
Senior Member
 
Join Date: April 19, 2012
Location: Western PA
Posts: 3,806
Welcome to TFL!

I know AAC and Gemtech make M13x1 mounts, so Silencerco might also. For some reason their website doesn't show what thread patterns they offer for the Specwar mounts, so you might need to call them to make sure. Every time I've called them they've been very helpful.

If they don't make a M13x1 mount, using an adaptor should be fine. Just make sure it shoulders properly and you de-grease it and Rocksett it in place along with the mount itself. Try to avoid using that spacer nut if you can (you probably won't need it), but even then you should be fine as long as it's precisely machined. Just make sure you look down the bore with the suppressor attached in order to make sure it lines up properly. If you want to make double-sure, take it to a gunsmith to check it for you.
__________________
0331: "Accuracy by volume."
Theohazard is offline  
Reply

Tags
swr specwar suppressor

Thread Tools Search this Thread
Search this Thread:

Advanced Search

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off

Forum Jump


All times are GMT -5. The time now is 08:00 PM.


Powered by vBulletin® Version 3.8.7
Copyright ©2000 - 2019, vBulletin Solutions, Inc.
This site and contents, including all posts, Copyright © 1998-2018 S.W.A.T. Magazine
Copyright Complaints: Please direct DMCA Takedown Notices to the registered agent: thefiringline.com
Contact Us
Page generated in 0.05713 seconds with 8 queries