The Firing Line Forums

Go Back   The Firing Line Forums > The Skunkworks > Handloading, Reloading, and Bullet Casting

Thread Tools Search this Thread
Old March 5, 2011, 11:16 PM   #1
Senior Member
Join Date: March 4, 2010
Location: Fayette AL
Posts: 197
44mag and 240 grn Berry plated bullets

I am having a hard time finding data for Berry plated bullets. Anybody got anything for 44mag with 240 grn plated HP's . I want a plinking load with Unique. Will be shooting it in a Ruger SBH with 7.5" barrel I've heard load at about mid range for hard cast lead. Is this correct?
Don't squat with your spurs on!!
LOLBELL is offline  
Old March 5, 2011, 11:30 PM   #2
Senior Member
Join Date: September 8, 2010
Posts: 495
I shoot these in my Model 29. If you're interested in a plinking load, then check out lead data for the .44 special or .44 magnum and load as you would for a lead bullet. If using jacketed data, then Berry's recommends not to exceed mid range load data, which to means me 5% under max. I start 10% under the jacketed data and go from there.

Last edited by testuser; March 5, 2011 at 11:35 PM.
testuser is offline  
Old March 6, 2011, 12:55 AM   #3
Senior Member
Join Date: July 28, 2007
Location: Central Ohio
Posts: 11,498
You might find some folks that shoot more actual Berry's bullets than I do (maybe they shoot steel every week in competition), but only in volume. I don't know of anyone in this forum that shoots a larger variety of Berry's plated slugs than I do.

I shoot their .32 cal 71gr plated RN, the flat base 100gr .380 slug, two different 9mm plated slugs, a .38 cal plated flat point, a 180 grain .40 cal flat point, two different 200 grain .45 slugs and I love their .30 cal 110 grain bullet in .30 Carbine outta my Blackhawk.

But I don't anticipate using their .44 cal bullets... because when I load .44 Mag, it's .44 Mag. It's got a heavy crimp (as it should) and it's got nuts, as a .44 Mag ought to. Neither of these conditions is good for plated bullets.

Any kind of a real roll crimp (as the .44 Mag begs for) is seriously detrimental to any plated bullet. And Berry's suggest that all the typical handgun bullets don't exceed 1,200 FPS, which .44 Mag certainly does.

For .44 Special loads? Perhaps, but I don't shoot the Special.
Attention Brass rats and other reloaders: I really need .327 Federal Magnum brass, no lot size too small. Tell me what caliber you need and I'll see what I have to swap. PM me and we'll discuss.
Sevens is offline  
Old March 6, 2011, 07:08 AM   #4
Junior Member
Join Date: November 29, 2009
Posts: 10
I load those at 8 gr of unique for plinking
32dgrz is offline  
Old March 6, 2011, 10:20 AM   #5
Senior Member
Join Date: March 4, 2010
Location: Fayette AL
Posts: 197
Thanks for the onfo guys
Don't squat with your spurs on!!
LOLBELL is offline  
Old March 6, 2011, 01:07 PM   #6
Senior Member
Join Date: October 18, 2009
Location: Lampasas, TX
Posts: 326
I load them to the max with Unique and haven't had any leading problems. I have shot a ton of them.
dawico is offline  
Old March 6, 2011, 01:50 PM   #7
Senior Member
Join Date: December 4, 1999
Location: WA, the ever blue state
Posts: 4,678
Any loads at all hot in 40sw or 10mm will cause my Berry's bullets to spin off jacket material and make the target ragged with little holes.

That would not be a good bullet design for my 44 mag loads.

... as much as I like to deal with the nice people at Berry's Bullets
Clark is offline  

Thread Tools Search this Thread
Search this Thread:

Advanced Search

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off

Forum Jump

All times are GMT -5. The time now is 02:29 PM.

Powered by vBulletin® Version 3.8.7
Copyright ©2000 - 2020, vBulletin Solutions, Inc.
This site and contents, including all posts, Copyright © 1998-2018 S.W.A.T. Magazine
Copyright Complaints: Please direct DMCA Takedown Notices to the registered agent:
Contact Us
Page generated in 0.05295 seconds with 10 queries