|
Forum Rules | Firearms Safety | Firearms Photos | Links | Library | Lost Password | Email Changes |
Register | FAQ | Calendar | Today's Posts | Search |
|
Thread Tools | Search this Thread |
October 28, 2013, 01:50 PM | #1 | |||
Senior Member
Join Date: July 28, 2007
Location: Ohio
Posts: 11,756
|
new 10mm ammo: Critical Duty
...or should it read, "Critical Doodie" ?!
Okay, so folks who are familiar with the 10mm know quite well how factory ammo in this chambering varies wildly. Most also know why that is, and go ahead and put your version of that somewhere in here if you feel that you must... Point is, the boutique ammo makers tend to build performance 10mm, built to approach or match the original specifications and intent of the round as it was designed. Most will agree that it's fairly HAIRY, and producing a lot of velocity with a fairly heavy weight slug. (in comparison with most mainstream semi-auto pistol rounds) While Buffalo Bore, Underwood, Double Tap and others focus on SOLID, full-spec 10mm, some of the big companies make some really weakened, watered-down 10mm, much of it sits around .40 S&W performance levels and some of it falls below the best .40 S&W ammo out there. Rem-UMC only makes range fodder/target FMJ, but Federal markets a "performance" and/or "defense" brands in the Hydra-Shock product, and both of these are quite weak as 10mm goes. Winchester only offers a single factory produced 10mm product currently, it's the seriously old-school Silvertip and while the bullet is very old technology, the velocity of the 175-grain slug is at least beyond some of the really wimpy "FBI Lite" grade 10mm that Federal and Remington produce. To the subject of the thread... Hornady! Yesterday, I stop in Cabela's and I see a 10mm factory ammo product that I'd never seen before. Hornady Critical Duty. Not to be confused with the "Critical Defense" product from the same manufacturer, the Critical Duty line of ammo was specifically designed for penetration and to limit expansion so that the round had the "juice" to pass FBI penetration testing, something that other expanding bullets can struggle with simply because of their easy, early and wide expansion. This particular 10mm ammo product advertises a 175 grain slug with a muzzle velocity of 1,050 FPS. And it sits on the shelf immediately next to the Buffalo Bore 10mm product that advertises a JHP with a muzzle velocity of 1,350 FPS... a full THREE HUNDRED feet per second faster. I find this new product baffling. Even funnier is that Hornady also offers 10mm ammo loaded with their classic XTP hollow point, and while it's not the full high-octane stuff that the boutique makers offer, it's at least pushing a similar weight slug to a more typical (proper?) 10mm Auto velocity. (180grain XTP rated at 1,180 FPS) Myself... I don't spend a lot of time dwelling on exterior ballistics. I tend to fall more in the camp that "multiple COM shots" are the answer, rather than looking for the magical single round that produces handgun miracles. But it doesn't bother me that other folks do enjoy the discussion and testing of ammunition performance and design. And there is always learning to be done in this area. --------------------------------------- In the most basic terms, I've got to ask: If you advertise a product as one that is designed to penetrate and defeat barriers, does it make sense that you load it to a velocity that falls two hundred to three FPS behind it's original design, and other products on the market? If you visit the Hornady web site, you will not see this product. It appears, thus far, that's it's a Cabela's exclusive. I swear... I am -NOT- making it up, the MV is printed right on the box itself. However the Hornady website will show you a .40 S&W Critical Duty product that sends a .40cal, 175 grain bullet at 1,010 FPS. What you can find on the Hornady website are these traits of the Critical Duty ammunition product line: Quote:
Quote:
Quote:
__________________
Attention Brass rats and other reloaders: I really need .327 Federal Magnum brass, no lot size too small. Tell me what caliber you need and I'll see what I have to swap. PM me and we'll discuss. |
|||
October 28, 2013, 02:15 PM | #2 |
Senior Member
Join Date: August 5, 2000
Location: Puget Sound, USA
Posts: 2,215
|
Nice.
I don't have to buy a .40 S&W barrel for my 10mm Glock. All I have to do is load up with some of that Critical Duty ammo, and then I am shooting .40 from a 10mm case! Thanks for bringing that to our attention. Bart Noir Who really does need to rummage around for those empty .327 cases, just to reward Mr Sevens.
__________________
Be of good cheer and mindful of your gun muzzle! |
October 28, 2013, 02:33 PM | #3 |
Senior Member
Join Date: March 8, 2010
Posts: 778
|
It has been a lot of years since I bought any factory stuff but I know a lot of it is referred to as medium velocity or something similar.
My old go-to load for a long time has been a Hornady 180 XTP using blue dot that averages 1252 fps. I use this not for the power but that has been very accurate with good power-at least good enough for me. |
October 28, 2013, 05:34 PM | #4 | |
Senior Member
Join Date: March 1, 2000
Location: Boise, ID
Posts: 8,518
|
Quote:
If you've shot any full-power, heavy bullet 10mm through a service-type pistol, you'll recognize immediately that the round is not something that many are going to choose for a service or carry, any more than someone was going to choose full-power .41 Magnum for a service revolver in the '60s. I think the really hot, heavy bullet loads are better for four-legged critters that aren't shooting back. |
|
October 28, 2013, 07:47 PM | #5 | |
Senior Member
Join Date: May 22, 2007
Location: The shores of Lake Huron
Posts: 4,783
|
Quote:
__________________
Stevie-Ray Join the NRA/ILA I am the weapon; my gun is a tool. It's regrettable that with some people those descriptors are reversed. |
|
October 28, 2013, 08:16 PM | #6 | |
Senior Member
Join Date: March 8, 2013
Location: Ohio
Posts: 1,820
|
Quote:
As with anything "new" or labled "police" or "service round" have always been selling points for ammunition. When it's all said and done they have been less effective than claimed. I see something different with the Critical Duty however. I have tested several rounds over the years on many things with mostly similar results when compared to similar rounds. Bone and some types of clothing causing HP's to clog has always been a problem. I have done a few test but nothing yet with real bone. Seems Like a good time for a few new test with bone I think. I have tested the Critical Duty through plywood and drywall with results similar to Hornady's test. Should be interesting.
__________________
If you ever have to use a firearm, you don't get to pick the scenario! |
|
October 29, 2013, 01:18 PM | #7 |
Senior Member
Join Date: March 18, 2009
Posts: 1,321
|
I like the Hornady 155 XTP, based on 10 shots it averaged 1,278 fps (faster than advertised) out of a Glock 29.
I don't want 10mm ammo loaded to 40 S&W, but I don't want it nuclear hot either. I wish Underwood would offer a "Delta Elite" load in 155/150 gr. A load that a stock Glock can shoot without bulged brass (like the Hornady 155).
__________________
Strive to carry the handgun you would want anywhere, everywhere; forget that good area bullcrap. "Wouldn't want to / Nobody volunteer to" get shot by _____ is not indicative of quickly incapacitating. |
October 29, 2013, 02:01 PM | #8 |
Senior Member
Join Date: July 28, 2007
Location: Ohio
Posts: 11,756
|
Running a 17-lb ISMI recoil spring my Glock 29 with original Glock 10mm barrel, I've not yet ever bulged a piece of 10mm brass in over 3,000 rounds. Not once, not ever.
Mostly, that's been handloads running 150 or 180 slug, Power Pistol, Blue Dot, IMR-800X or Longshot. In factory, it's been Hornady, Remington, Federal, Winchester Silvertip and two boxes of the hot Buffalo Bore 180's. My G29 is a Gen3 with a summer 2008 build date, MML prefix.
__________________
Attention Brass rats and other reloaders: I really need .327 Federal Magnum brass, no lot size too small. Tell me what caliber you need and I'll see what I have to swap. PM me and we'll discuss. |
October 29, 2013, 02:08 PM | #9 |
Moderator Emeritus
Join Date: June 25, 2008
Location: Austin, CO
Posts: 19,578
|
I can only say that while such ammo is disappointing, it is not at all surprising. As noted in the OP, most factory 10mm ammo has been weak for years and most official published load data has the round worse than neutered, often no more than 50fps or so faster than 40SW data with identical bullets and the 10mm with LONGER barrel lengths.
The 10mm is a shining example of why I handload.
__________________
Nobody plans to screw up their lives... ...they just don't plan not to. -Andy Stanley |
October 29, 2013, 02:39 PM | #10 |
Senior Member
Join Date: May 11, 2009
Location: Phoenix
Posts: 4,580
|
I'm disappointed, but not surprised by this. I do like 10mm a lot, but the reason is because of it's versatility. I think hot 10mm loads are overkill for defense against humans.
Personally, I carry the Federal Hishock for self-defense, and then switch out for the Buffalo Bore if I'm going out hiking/camping/etc. I have also just carried it with Federal HST 40S&W using my Lone Wolf conversion barrel on occasion. I have just as much 40 through the gun, maybe more, as I do 10mm... so I feel perfectly confident carrying it with the lone wolf barrel. It's the only 40 I own anymore, and the only one I actually enjoy shooting.
__________________
Handguns: 2x Glock 19.4 | Glock 26.4 | HK USP 9 | HK P2000 | HK VP9 SK | HK P30 | CZ Shadow 2 | CZ P-10 C | CZ P-07 | CZP-01 | S&W 360PD Rifles: DDM4 | SGL 21 | SAM7K | Draco | PSA PDW SBR | ASA Side-Charger SBR | CZ Scorpion K SBR | Aero M4E1 9" 300blk SBR | Angstadt Jack9 SBR | Savage Mark II FV-SR Shotguns: Mossberg 590A1 20" SP | Mossberg Shockwave |
October 29, 2013, 05:20 PM | #11 |
Senior Member
Join Date: February 13, 2013
Posts: 119
|
new 10mm ammo: Critical Duty
Hornady has pretty boxes and nice little plastic tips in their bullets but they will never be carried as a SD round in one of my guns. Most of their ammo will not test to the speed on the box. I keep asking on different forums for somebody to name a LE agency that uses it and I am still waiting. It has been known for feeding problems. It amazes me how many people actually carry this stuff. It is cheap and pretty and shoots soft and good for practice. It sounds like it just keeps getting weaker. I do not understand them making a 10mm round that is weaker than a weak .40.
|
October 29, 2013, 05:26 PM | #12 |
Senior Member
Join Date: May 11, 2009
Location: Phoenix
Posts: 4,580
|
I have seen Hornady in several PD firearms. Glendale, AZ is one.
While this 10mm is a poor example, their Critical DUTY line is generally great stuff. The Critical Defense line... not so much. I run the Critical Duty 135gr +P 9mm in my G19 and M&P9. Exceeded specs on Chrono. Feeds 100% and shoots accurately. I wouldn't call it cheap either. Just about the same as Golden Saber.
__________________
Handguns: 2x Glock 19.4 | Glock 26.4 | HK USP 9 | HK P2000 | HK VP9 SK | HK P30 | CZ Shadow 2 | CZ P-10 C | CZ P-07 | CZP-01 | S&W 360PD Rifles: DDM4 | SGL 21 | SAM7K | Draco | PSA PDW SBR | ASA Side-Charger SBR | CZ Scorpion K SBR | Aero M4E1 9" 300blk SBR | Angstadt Jack9 SBR | Savage Mark II FV-SR Shotguns: Mossberg 590A1 20" SP | Mossberg Shockwave |
October 29, 2013, 05:51 PM | #13 | |
Senior Member
Join Date: May 13, 2011
Location: Carolina
Posts: 3,415
|
Quote:
http://www.youtube.com/watch?v=Xe_wDxglNHo
__________________
Mrgunsngear Youtube Channel |
|
October 29, 2013, 11:42 PM | #14 |
Senior Member
Join Date: December 24, 2011
Posts: 163
|
If they are running the same 175gr critical duty HP in the 10 that they do in the .40, they run it at nearly the same speed because that's what the bullet is designed for. Run it too fast and it probably 'over expands' and 'under penetrates' relative to the desired (FBI) criteria. One of the tough things with the 10 is finding a projectile designed to take true 10 velocities, as almost all projectiles are designed to work at .40 velocities.
|
October 30, 2013, 10:50 AM | #15 |
Senior Member
Join Date: July 24, 2005
Location: Kentucky
Posts: 768
|
Either Hornady intentionally loaded it light to tick off the 10mm crowd, or perhaps they did it in a bit of a hurry, not really bumping things up too much. Some bullets aren't pushed faster because the short of it is simple, faster isn't always better. Sure it can be, but it isn't always a sure bet.
I like the 10mm as a whole, but this whole boo hoo it's watered down factory ammo stuff is old. I know many 10mm guys vehemently dislike the .40, otherwise they wouldn't be so quick to crap on .40 level loads out of the 10mm. Sure I get the whole hey it's a 10mm so it should be loaded like a 10mm thing, but at the same time, last time I checked the .40 was very effective. I know from experience that some .40 bullets just don't like to be pushed much faster at all while some hold up somewhat well to extra velocity. To add, the original 10mm loads were known to be very warm...warm as in over pressure and finicky. I'm all for a stout 10mm if it's using the right bullet for the velocity, but at the same time, ammo makers the like of Underwood and Buffalo Bore handily exceed the 10mm's given pressure rating. In short, they may be fast, but they're also over pressure. |
October 30, 2013, 11:12 AM | #16 | |
Senior Member
Join Date: June 27, 2012
Location: New Hampshire
Posts: 525
|
Quote:
I'm not knocking hornady as a brand though. Their ammo seems alright based on tests I've watched, and if it did work in my only handgun then I'd feel pretty safe with it.
__________________
I don't always go to the range, but when I do, I prefer dosAKs. They say 5 out of 4 people are bad at math. |
|
October 30, 2013, 12:17 PM | #17 |
Senior Member
Join Date: March 8, 2010
Posts: 778
|
The 10mm is one of those calibers you will rarely be satisfied with it if you don't handload.
|
October 30, 2013, 01:19 PM | #18 | ||
Senior Member
Join Date: July 28, 2007
Location: Ohio
Posts: 11,756
|
Quote:
For folks who don't know, the relationship between .40 S&W and 10mm Auto isn't at all like the relationship between .38 Special/.357 Magnum or .44 Special/.44 Magnum. .40cal & 10mm are much, much closer and run nearly the same pressures. Those others run like double the pressure. There are other fantastic reasons to loathe .40cal, but even 'real' 10mm guys can (and should) find reasons to also like .40cal. Quote:
__________________
Attention Brass rats and other reloaders: I really need .327 Federal Magnum brass, no lot size too small. Tell me what caliber you need and I'll see what I have to swap. PM me and we'll discuss. |
||
November 1, 2013, 02:24 PM | #19 | |
Senior Member
Join Date: February 13, 2013
Posts: 119
|
new 10mm ammo: Critical Duty
Quote:
|
|
November 1, 2013, 03:27 PM | #20 |
Senior Member
Join Date: February 20, 1999
Location: home on the range; Vermont (Caspian country)
Posts: 14,324
|
maybe for ONE shot
Most shooters simply cannot control powerful 10mm rds.
__________________
. "all my ammo is mostly retired factory ammo" |
November 1, 2013, 05:39 PM | #21 |
Senior Member
Join Date: March 1, 2000
Location: Boise, ID
Posts: 8,518
|
Is there a need to "control" them? Does anyone discuss controlling .500 Magnum?
|
November 1, 2013, 06:11 PM | #22 |
Senior Member
Join Date: September 23, 2013
Location: Alabama
Posts: 2,969
|
if you want true 10mm velocities and weights which coincide with the box flap specs, you have to buy reasonably priced Underwood or high priced Buffalo Bore.
old Double Tap use to do what it said on the box, I still have a stash of that, but the new stuff is watered down comparatively speaking. none of the big four make true 10mm powered ammo. |
November 1, 2013, 06:55 PM | #23 |
Member
Join Date: December 11, 2009
Location: St. Clair, Mo.
Posts: 29
|
People need to quit complaining and just do something about it. I reload using Missouri Bullets or Hornady HAP 175g/180g with 8.2 grains of Powerpistol. It is cost effective. If I want to get 'crazy' I will buy low power store rounds, yank the bullet, dump the powder and reload using 8.2g Powerpistol. As powerpistol is all I have. Not very cost effective but I get to use the bullet.
|
November 1, 2013, 07:06 PM | #24 |
Member
Join Date: December 11, 2009
Location: St. Clair, Mo.
Posts: 29
|
People need to quit complaining and just do something about it. I reload using Missouri Bullets or Hornady HAP 175g/180g with 8.2 grains of Powerpistol. It is cost effective. If I want to get 'crazy' I will buy low power store rounds, yank the bullet, dump the powder and reload using 8.2g Powerpistol. As powerpistol is all I have. Not very cost effective but I get to use the bullet.
|
November 1, 2013, 10:39 PM | #25 |
Senior Member
Join Date: December 20, 2009
Location: Texas Gulf Coast
Posts: 728
|
The local Academy is carrying Ted Nugent branded ammo, distributed by American Tactical of Rochester NY. I picked up a couple of boxes of it just to try but haven't made it to the range with it yet. According to the box, it's loaded with a 180 gr Speer UHP bullet at 1238 fps. Box of 20 is about $20.
|
|
|