The Firing Line Forums

Go Back   The Firing Line Forums > The Hide > The Dave McCracken Memorial Shotgun Forum

Reply
 
Thread Tools Search this Thread
Old November 1, 2020, 12:50 PM   #1
Joe_Pike
Senior Member
 
Join Date: December 30, 2010
Posts: 1,537
Does Anyone Have Experience With Choate Stocks?

I'm converting my 590 Shockwave to a 20" shotgun and am trying to do it as inexpensively as possible. I have a Mesa Tactical stock adapter with a pistol grip that I could add an adjustable stock to but don't think I'll use it due to the more difficult access to the safety.
I've had a 500 with the Hogue 12" LOP stock on it but that thing is "grabby". I've thought about the Magpul stock but then I would want to change the forend and that's just more money. I've seen some Choate tactical/youth stocks that are reasonably priced but haven't seen much in the way of feedback.
So, anyone here use a Choate stock?
__________________
Stay Groovy
Joe_Pike is offline  
Old November 1, 2020, 07:17 PM   #2
Dfariswheel
Senior Member
 
Join Date: May 4, 2001
Posts: 7,332
I gave you an answer on the other forum.....

Bottom line, the Choate is entirely good to go.
Dfariswheel is offline  
Old November 1, 2020, 11:09 PM   #3
ocharry
Senior Member
 
Join Date: October 20, 2006
Posts: 528
I have a choate set(stock and forearm) on my 1100 and my 870.... No problems. They work just fine...both of the stocks came with spacers for length of pull....been on the guns for several years.....I would buy again

My .02
Ocharry
__________________
YHS
ocharry
ocharry is offline  
Old November 1, 2020, 11:14 PM   #4
Joe_Pike
Senior Member
 
Join Date: December 30, 2010
Posts: 1,537
Thanks for the replies.
__________________
Stay Groovy
Joe_Pike is offline  
Old November 2, 2020, 02:07 PM   #5
wild cat mccane
Senior Member
 
Join Date: May 22, 2011
Posts: 2,036
They make the Mossberg pad...no?
wild cat mccane is offline  
Old November 7, 2020, 06:49 PM   #6
Shadow9mm
Senior Member
 
Join Date: March 21, 2012
Location: Indianapolis, IN
Posts: 828
personally the mossberg furnature is cheap enough. in my experience with choate they seems slightly cheaper and heaver than the factory but they work.
__________________
I don't believe in "range fodder" that is why I reload.
Shadow9mm is offline  
Old November 8, 2020, 02:54 PM   #7
44 AMP
Staff
 
Join Date: March 11, 2006
Location: Upper US
Posts: 22,784
Can't speak to the shotgun stock but I've had a Choate folder on a Mini 14 for decades. Flawless positive function, and durable. If their shotgun stock is the same, you should have no issues.
__________________
All else being equal (and it almost never is) bigger bullets tend to work better.
44 AMP is offline  
Old November 9, 2020, 04:06 AM   #8
bamaranger
Senior Member
 
Join Date: October 9, 2009
Location: North Alabama
Posts: 7,351
Choate

Had a very early Choate set on a work 870 for years. Not sure what they look like now, but mine was the scalloped out looking version with a molded, hollow tube portion that took the stock bolt. The Choate pad was hard and narrow and did nothing to ease recoil. But the stock was tough as nails. Light weight as well.
bamaranger is online now  
Old November 9, 2020, 08:00 AM   #9
Spats McGee
Staff
 
Join Date: July 28, 2010
Location: Arkansas
Posts: 8,393
Let me start by saying I've known the Choates for somewhere north of 40 years. Having now confessed to my possible bias, I'll say this: I've been using Choate products for decades and have never had a problem with one. They like to build with an eye towards making their stocks indestructible, which might make them a little heavier than their competitors, but I've never known anyone to tear one up. If you have any questions, don't hesitate to call them at the shop. The Choates and the folks that work there are absolutely some of the nicest folks you could ever hope to meet.
__________________
I'm a lawyer, but I'm not your lawyer. If you need some honest-to-goodness legal advice, go buy some.
Spats McGee is offline  
Old November 11, 2020, 02:19 AM   #10
Scorch
Senior Member
 
Join Date: February 13, 2006
Location: Washington state
Posts: 14,426
How you will feel about a Choate stock depends entirely on what you expect it to be like. If you expect it to be cheap and heavy but work OK, then you're good to go. If you expect it to have good fit and finish and look appealing, you will be disappointed. I am not a fan, but I have had many customers who were entirely happy with their Choate products.
__________________
Never try to educate someone who resists knowledge at all costs.
But what do I know?
Summit Arms Services
Taylor Machine
Scorch is offline  
Reply

Thread Tools Search this Thread
Search this Thread:

Advanced Search

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off

Forum Jump


All times are GMT -5. The time now is 01:42 AM.


Powered by vBulletin® Version 3.8.7
Copyright ©2000 - 2021, vBulletin Solutions, Inc.
This site and contents, including all posts, Copyright © 1998-2020 S.W.A.T. Magazine
Copyright Complaints: Please direct DMCA Takedown Notices to the registered agent: thefiringline.com
Page generated in 0.06071 seconds with 10 queries