The Firing Line Forums

Go Back   The Firing Line Forums > The Skunkworks > The Harley Nolden Memorial Institute for Firearms Research

Reply
 
Thread Tools Search this Thread
Old October 28, 2010, 11:45 PM   #1
webhak
Junior Member
 
Join Date: November 5, 2002
Location: Nevada
Posts: 5
European parlor/target pistols

I'm helping an elderly relative down-size his collection and he is interested in selling four parlor/target pistols (and a rifle which I will post separately) he purchased many years ago. He will be taking these to a buyer in a few days and I'd like to make sure he is not getting taken to the cleaners and will get a fair value for these guns.

Attached are photos (apologies for the large images...on the road and am uploading directly from camera) and the best descriptions I can give.

1) Pistol 1: Breech-loading. Guessing a .22 caliber. Has initials "JB" and "L&C Bils" (in a circle) stamped on the bottom of the barrel, just forward of the trigger guard. Stamped on the left side of the barrel is a circle with an "E" at the 12 o'clock position, an "L" at the 7 o'clock position and a "G" at the 5 o'clock position.




2) Pistol 2: Tulip barrel muzzle loader. Stamped on the right receiver plate is "IN WIEN" and stamped on top of the barrel is "JOHANN CONTRINER IN WIEN"





3) Pistols 3 & 4 are in wood box that includes a screwdriver and a cleaning brush. Both shoot 22 "BB caps" (?) and are breech-loaded.

Pistol 3 (top in box) has "ML 23" stamped on the barrel. On the bottom of the barrel is stamped "305 UR".

Pistol 4 (bottom in box) has "MANUFACTURE FRANCAISE D'ARMES & CYCLES ST. ETIENNE" stamped on the barrel. "732" is stamped on the inside of the trigger guard.

webhak is offline  
Old November 3, 2010, 04:39 PM   #2
SDC
Senior Member
 
Join Date: January 23, 2001
Location: People's Republic of Kanada
Posts: 1,652
Sorry I can't help with values, but here's my best shot at identifications:

1- looks to be made by J.B. Ronge & Fils ("J.B. Ronge & Sons"), of Liege, Belgium. This might or might not be 22, as many of these pistols were chambered for 6mm Flobert, a rimfire cartridge whose chamber will accept a 22 cartridge, but which is a lot less powerful; PLEASE DON'T ALLOW THIS TO BE FIRED UNTIL YOU MAKE SURE OF THE CHAMBERING.

2 - is marked as being made by Johann Contriner, of Vienna ("Wien"), Austria, sometime between 1870 and 1876. It's not unheard of for a pistol like this to still be loaded, so make sure the barrel and breech are clear with a rod.

3 & 4 - these have the same breech design, but you might need to take them out of the wood to get a better look at any markings; they both are marked as French, by Manufacture Francaise D'Armes (MF), but were likely put together as a "set" sometime after they were built.
__________________
Gun control in Canada: making the streets safer for rapists, muggers, and other violent criminals since 1936.
SDC is offline  
Reply

Thread Tools Search this Thread
Search this Thread:

Advanced Search

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off

Forum Jump


All times are GMT -5. The time now is 10:51 AM.


Powered by vBulletin® Version 3.8.7
Copyright ©2000 - 2024, vBulletin Solutions, Inc.
This site and contents, including all posts, Copyright © 1998-2021 S.W.A.T. Magazine
Copyright Complaints: Please direct DMCA Takedown Notices to the registered agent: thefiringline.com
Page generated in 0.03653 seconds with 10 queries