Winchester 190 Takedown - Page 5

santowis · May 19, 2008, 06:59 PM

I was able to get the Winchester 190 operator's manual repro by calling Browning/Winchester at 1-800-333-3288, but if anyone has a pdf of a takedown manual, I sure would appreciate one.

santowis · May 20, 2008, 10:40 PM

Found the takedown link after reading all the messages.
The one under #97 works.

nbkhuntsman · May 29, 2008, 09:12 PM

Hi all. New to this forum and was trying to find info on how to disassemble a Win. 190. The two links posted did not work for me. Could someone kindly email the manual to me at [email protected] Thanks in advance!

glassmanetch · June 10, 2008, 07:53 PM

hey is there anyone coud send me a copy of the takedown man an so forth
thanks alot.. mike
[email protected]
i tried all the links but still couldnt get it to load the page

ruffcutt · June 21, 2008, 07:28 PM

Could someone email me the the takedown man. [email protected]

Thankyou

dragonbreath · July 9, 2008, 04:53 PM

I would like a copy as well please.

[email protected]

dedyamisha · July 9, 2008, 08:42 PM

Is it possible to get a copy of the takedown instructions for the Wincherster 190. My nephew got his down, but cannot get a spring back in. Thanks! email = [email protected]

moose3443 · July 14, 2008, 09:18 PM

had a 190 that has been sitting for a while and needs a good cleaning if anyone could send me a copy of the takedown manual it would be greatly appreciated [email protected]

guntotin_fool · July 15, 2008, 02:00 AM

It takes three hands to get the long spring back in, but its easy to do. get a coat hanger, a heavy wire one, cut the hanger on the bottom and slide the spring on to the hanger, stick the end of the hang that you just cut into the hole in the receiver, now using a small screw driver or ignition wrench, press on the end of the spring and let the spring be guided by the coat hanger. When you get the spring all the way in, carefully remove the coat hanger, replace the spring follower in its place and then drop in the trigger group.

kennyray · July 18, 2008, 04:48 PM

Harley could i get a copy of the manual for the 190 please , thanks.
e-mail [email protected]

letang · August 18, 2008, 09:13 AM

Hi Harley,
I've got a Winchester 190 too, and it now needs a spare part to fix the trigger/reload system. Can you send me the takedown drawings too.
Thanks
[email protected]

stonededge · August 20, 2008, 05:29 PM

Hey harley. im new to the rifle world and just aquired a winchester 22. i was wondering if you could send me the takedown manuel, and any tips you wouldnt mind sharing with a young kid. Thank you.

Celmar · August 26, 2008, 11:31 AM

Hello, I'm a new member from France (sorry for approximate writing). I recently acquired a Winchester 190 (22lr) of 1977, from a friend. He told me he had never shot rounds ! Problem, I 'm unable to find the owners manual (or breakdown and reassembly) here in France, could you help me or send me the information.
Many thanks.

ekrowler · August 27, 2008, 10:14 PM

Harley,
Please send me a copy of the Winchester 190 takedown manual. I have the gun broken down for cleaning but am having trouble reinstalling the spring. I'm hoping the manual will help with this step of the reassembly.

Please send to [email protected]. Thanks.

Shamus · January 2, 2009, 09:58 AM

Any chance I can get a copy?

[email protected]

TIA

TDS1 · January 22, 2009, 07:50 AM

I just purchased a Winchester model 190 for my son and I am looking for a takedown manual I have tried a couple of the links listed here with no sucess .Any help would be apreciated.

Potts · March 23, 2009, 05:46 PM

Hi,

I just found your website and I need instructions and pictures for the Winchester 190 takedown. Send to my email address at [email protected]
Thanks

saintjock · March 24, 2009, 02:33 PM

I just got the rifle back and the cocking handle has broken so Im wondering that actual name of the part so I can order another. I would really appreciate the takedown via email. Thanks Ryan.

ATLDiver · April 12, 2009, 08:53 PM

I have a Sears Mod 3T which appears to be a re-badged Winchester 190. I would love to have those takedown instructions, Harley if you would be so kind to foward them to me as well.

One question, my 3T has a slightly loose forarm. It doesn't impair the function other than a heavy and rough trigger. I know a good gun-smith that I was thinking of giving him a crack and re-working the trigger and action. If I need to pick up any of these parts, are they still available?

DixieFlatline · April 14, 2009, 12:33 PM

Sorry if this has been asked and answered already, but what kind of wrench/spanner do I need to get the barrel collar off of the Winchester 190?

deadeye-doc · April 22, 2009, 03:28 PM

Mr. Harley Nolden, Would you be so kind as to send me the information you have given others about the take-down and assembly of my Winchester 190 22LR? I would be very grateful for your help. [email protected]

tommygunz123083 · May 5, 2009, 11:39 AM

can anyone help me find the winchester model 190 22 cal takedown manual??

tgladden · May 8, 2009, 07:19 AM

Harley could i get a copy of the manual for the 190 please. Inherited one from my father-in-law after he passed and it needs a relly good cleaning. Thank you in advance.

email: [email protected]

Ian1 · May 9, 2009, 08:08 PM

Harley could you please send me a copy of the manual for the 190. I inherited one from my wife's uncle and it needs a good cleaning before I even think about taking it to the range. Thank you in advance. Ian [email protected]

rickyj · May 15, 2009, 10:45 PM

Hi Harley,

I would love to get a copy of the diagram for the takedown of a winchester 190.

I just was given my dads rifle.

thanks much

[email protected]

May 19, 2008, 06:59 PM	#101
santowis Junior Member Join Date: May 18, 2008 Posts: 3	Followup to my message I was able to get the Winchester 190 operator's manual repro by calling Browning/Winchester at 1-800-333-3288, but if anyone has a pdf of a takedown manual, I sure would appreciate one.

May 20, 2008, 10:40 PM	#102
santowis Junior Member Join Date: May 18, 2008 Posts: 3	Winchester 190 Found the takedown link after reading all the messages. The one under #97 works.

May 29, 2008, 09:12 PM	#103
nbkhuntsman Junior Member Join Date: May 28, 2008 Posts: 1	winchester 190 disassembly manual request Hi all. New to this forum and was trying to find info on how to disassemble a Win. 190. The two links posted did not work for me. Could someone kindly email the manual to me at [email protected] Thanks in advance!

June 10, 2008, 07:53 PM	#104
glassmanetch Junior Member Join Date: June 10, 2008 Posts: 1	winchester 22 lr model 190 hey is there anyone coud send me a copy of the takedown man an so forth thanks alot.. mike [email protected] i tried all the links but still couldnt get it to load the page

July 9, 2008, 04:53 PM	#106
dragonbreath Junior Member Join Date: July 9, 2008 Posts: 1	Winchester 190 I would like a copy as well please. [email protected]

June 21, 2008, 07:28 PM	#105
ruffcutt Junior Member Join Date: June 21, 2008 Posts: 1	Could someone email me the the takedown man. [email protected] Thankyou

July 9, 2008, 08:42 PM	#107
dedyamisha Junior Member Join Date: July 9, 2008 Location: South Louisiana Posts: 2	Winchester 190 Takedown Is it possible to get a copy of the takedown instructions for the Wincherster 190. My nephew got his down, but cannot get a spring back in. Thanks! email = [email protected]

July 14, 2008, 09:18 PM	#108
moose3443 Junior Member Join Date: July 14, 2008 Posts: 1	winchester 190 takedown had a 190 that has been sitting for a while and needs a good cleaning if anyone could send me a copy of the takedown manual it would be greatly appreciated [email protected]

July 15, 2008, 02:00 AM	#109
guntotin_fool Senior Member Join Date: November 18, 2004 Posts: 1,446	It takes three hands to get the long spring back in, but its easy to do. get a coat hanger, a heavy wire one, cut the hanger on the bottom and slide the spring on to the hanger, stick the end of the hang that you just cut into the hole in the receiver, now using a small screw driver or ignition wrench, press on the end of the spring and let the spring be guided by the coat hanger. When you get the spring all the way in, carefully remove the coat hanger, replace the spring follower in its place and then drop in the trigger group.

July 18, 2008, 04:48 PM	#110
kennyray Junior Member Join Date: July 18, 2008 Location: kentucky Posts: 2	model 190 manual Harley could i get a copy of the manual for the 190 please , thanks. e-mail [email protected]

August 18, 2008, 09:13 AM	#111
letang Junior Member Join Date: August 18, 2008 Posts: 2	Winchewster 190 Hi Harley, I've got a Winchester 190 too, and it now needs a spare part to fix the trigger/reload system. Can you send me the takedown drawings too. Thanks [email protected]

August 20, 2008, 05:29 PM	#112
stonededge Junior Member Join Date: August 20, 2008 Posts: 1	Winchester 190 Hey harley. im new to the rifle world and just aquired a winchester 22. i was wondering if you could send me the takedown manuel, and any tips you wouldnt mind sharing with a young kid. Thank you.

August 26, 2008, 11:31 AM	#113
Celmar Junior Member Join Date: August 26, 2008 Location: France Posts: 1	Winchester 190 manual Hello, I'm a new member from France (sorry for approximate writing). I recently acquired a Winchester 190 (22lr) of 1977, from a friend. He told me he had never shot rounds ! Problem, I 'm unable to find the owners manual (or breakdown and reassembly) here in France, could you help me or send me the information. Many thanks.

August 27, 2008, 10:14 PM	#114
ekrowler Junior Member Join Date: August 27, 2008 Posts: 1	Please Email me the Winchester 190 Takedown Manual Harley, Please send me a copy of the Winchester 190 takedown manual. I have the gun broken down for cleaning but am having trouble reinstalling the spring. I'm hoping the manual will help with this step of the reassembly. Please send to [email protected]. Thanks.

January 2, 2009, 09:58 AM	#115
Shamus Member Join Date: May 31, 2004 Location: Ohio Valley Posts: 94	Any chance I can get a copy? [email protected] TIA

January 22, 2009, 07:50 AM	#116
TDS1 Junior Member Join Date: January 21, 2009 Posts: 1	Winchester model 190 takedown manual I just purchased a Winchester model 190 for my son and I am looking for a takedown manual I have tried a couple of the links listed here with no sucess .Any help would be apreciated.

March 23, 2009, 05:46 PM	#117
Potts Junior Member Join Date: March 23, 2009 Posts: 1	Winchester 190 Takedown Hi, I just found your website and I need instructions and pictures for the Winchester 190 takedown. Send to my email address at [email protected] Thanks

March 24, 2009, 02:33 PM	#118
saintjock Junior Member Join Date: March 24, 2009 Posts: 1	I am looking for that takedown aswell I just got the rifle back and the cocking handle has broken so Im wondering that actual name of the part so I can order another. I would really appreciate the takedown via email. Thanks Ryan.

April 12, 2009, 08:53 PM	#119
ATLDiver Junior Member Join Date: April 12, 2009 Posts: 1	Thanks for all the great info I have a Sears Mod 3T which appears to be a re-badged Winchester 190. I would love to have those takedown instructions, Harley if you would be so kind to foward them to me as well. One question, my 3T has a slightly loose forarm. It doesn't impair the function other than a heavy and rough trigger. I know a good gun-smith that I was thinking of giving him a crack and re-working the trigger and action. If I need to pick up any of these parts, are they still available?

April 14, 2009, 12:33 PM	#120
DixieFlatline Junior Member Join Date: April 12, 2009 Posts: 8	Barrel Collar Wrench? Sorry if this has been asked and answered already, but what kind of wrench/spanner do I need to get the barrel collar off of the Winchester 190?

April 22, 2009, 03:28 PM	#121
deadeye-doc Junior Member Join Date: April 22, 2009 Location: Kansas City Posts: 2	Mr. Harley Nolden, Would you be so kind as to send me the information you have given others about the take-down and assembly of my Winchester 190 22LR? I would be very grateful for your help. [email protected]

May 5, 2009, 11:39 AM	#122
tommygunz123083 Junior Member Join Date: May 5, 2009 Posts: 1	winchester model 190 can anyone help me find the winchester model 190 22 cal takedown manual??

May 8, 2009, 07:19 AM	#123
tgladden Junior Member Join Date: May 8, 2009 Posts: 1	Inherited a 190, needs good cleaning Harley could i get a copy of the manual for the 190 please. Inherited one from my father-in-law after he passed and it needs a relly good cleaning. Thank you in advance. email: [email protected]

May 9, 2009, 08:08 PM	#124
Ian1 Junior Member Join Date: May 9, 2009 Posts: 1	winchester 190 disassembly manual request Harley could you please send me a copy of the manual for the 190. I inherited one from my wife's uncle and it needs a good cleaning before I even think about taking it to the range. Thank you in advance. Ian [email protected]

May 15, 2009, 10:45 PM	#125
rickyj Junior Member Join Date: May 15, 2009 Posts: 1	Hey Harley, can I get a copy of the Winchester 190 takedown diagram? Hi Harley, I would love to get a copy of the diagram for the takedown of a winchester 190. I just was given my dads rifle. thanks much [email protected]