The Firing Line Forums

Go Back   The Firing Line Forums > The Hide > NFA Guns and Gear

Reply
 
Thread Tools Search this Thread
Old February 24, 2018, 08:58 AM   #1
Captains1911
Senior Member
 
Join Date: November 18, 2009
Location: Loudoun County, VA
Posts: 614
Suppressed G17 - Recoil Spring Weight

When I shoot my G17 with an AAC Illusion, I get an occasional particle/grit/sand blast blowback to the face, and the gun gets extremely dirty. Is this due to the barrel unlocking a little too early? Would a stronger recoil spring, like say 20 lbs, help mitigate either of these issues?
__________________
NRA Certified Pistol Instructor & RSO, IDPA Expert, Project Appleseed Rifleman
Member NRA, GOA, SAF, VCDL
Captains1911 is offline  
Old February 24, 2018, 12:21 PM   #2
Theohazard
Senior Member
 
Join Date: April 19, 2012
Location: Western PA
Posts: 3,716
Gas/particle blowback and an extra-dirty gun are just some of the drawbacks to using a silencer. That said, delaying the gun's unlocking can improve those issues. You can try using the heaviest spring that will allow the gun to still function, and that will probably improve things at least a little bit.

Some people also tighten the gun's lockup by replacing parts like the slide lock, getting a tighter-fitting barrel, etc., but I doubt this makes a noticeable difference.

The biggest thing you can do is use different ammo: Instead of getting a stiffer recoil spring, you could use (or reload) low-pressure subsonic ammo that's just powerful enough to cycle the action.

On a side note, make sure the blowback is coming from the action of the gun and not the back of the can itself. If it's coming from action, that's normal. If it's coming out of the back of the can, you probably have a bad o-ring that needs replacement. The o-ring around the piston on my Octane fell apart and started sending stuff back in my face. At first I thought it was just an ammo issue. By the time I realized it was the o-ring, the can had misaligned enough from the o-ring failing that I had a baffle strike. Luckily it was a tiny one, it was more like a baffle scrape and not worth replacing the endcap over.
__________________
0331: "Accuracy by volume."

Last edited by Theohazard; February 24, 2018 at 12:27 PM.
Theohazard is offline  
Reply

Thread Tools Search this Thread
Search this Thread:

Advanced Search

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off

Forum Jump


All times are GMT -5. The time now is 04:11 PM.


Powered by vBulletin® Version 3.8.7
Copyright ©2000 - 2018, vBulletin Solutions, Inc.
This site and contents, including all posts, Copyright © 1998-2018 S.W.A.T. Magazine
Copyright Complaints: Please direct DMCA Takedown Notices to the registered agent: thefiringline.com
Contact Us
Page generated in 0.05286 seconds with 10 queries