March 28, 2012, 07:45 PM | #1 |
Senior Member
Join Date: January 11, 2012
Location: Indiana
Posts: 1,059
|
Question 1860 army
I bought a 1860 Army yesterday what is the best way to know the ball size to order ? I don,t have it in my hand yet .
KEYBEAR |
March 28, 2012, 07:52 PM | #2 |
Junior member
Join Date: August 8, 2009
Posts: 374
|
Wait 'till you have it in hand and can take some measurements.
|
March 28, 2012, 08:00 PM | #3 |
Junior member
Join Date: January 26, 2012
Posts: 1,066
|
What brand 1860?
Willie . |
March 28, 2012, 08:04 PM | #4 |
Senior Member
Join Date: January 11, 2012
Location: Indiana
Posts: 1,059
|
1860
It,s a Pietta . Bought it as new unfired on the net .
|
March 28, 2012, 08:28 PM | #5 |
Senior Member
Join Date: December 27, 2010
Posts: 211
|
I use .457" balls in my Pietta 1860. They work just fine. I feel the bigger the better. I usually load with the cylinder off of the gun using a press. But the larger balls can be loaded with the cylinder on the gun it just requires more force.
|
March 28, 2012, 08:28 PM | #6 |
Junior member
Join Date: January 26, 2012
Posts: 1,066
|
.454 balls, they should shave a little when you ram them.
Should be fine in the Pietta. Willie . Last edited by Willie Sutton; March 30, 2012 at 10:47 PM. |
March 28, 2012, 08:41 PM | #7 |
Senior Member
Join Date: May 14, 2009
Location: Macon Co. NC
Posts: 591
|
.454 balls will also shave a good bit and I have never had a problem with them, and is typically what is recommended in most user manuals. The .457 is typically used in Ruger old Army's, but can certainly be used- they just aren't usually stocked in most local stores if you have to find them, and the little shaved ring is a bit stiffer and must be removed or it will bind the cylinder in the barrel/cylinder gap. I can't say that I've used the .457 balls I have yet...still waiting for a $100 stainless old army.
The .451 balls may or may not be a good snug fit, depending upon the tolerances of your cylinder. Alway err on the side of going up a size to get good accuracy and to help prevent chain fires.
__________________
Barney Fife: "Nip it, nip it, nip it!" Andy Griffith:"Oh now Barn'...." |
March 28, 2012, 09:01 PM | #8 |
Junior member
Join Date: August 8, 2009
Posts: 374
|
.451 balls work just fine in my Pietta 1860.
|
March 28, 2012, 09:28 PM | #9 |
Senior Member
Join Date: January 11, 2012
Location: Indiana
Posts: 1,059
|
1860
I was thinking 454 but not sure . I should have it next week and wil know then . Thank You
|
March 28, 2012, 09:32 PM | #10 |
Senior Member
Join Date: January 7, 2012
Location: Auburn, AL.
Posts: 2,332
|
.454 in my Pietta 1860.
|
March 28, 2012, 10:13 PM | #11 |
Senior Member
Join Date: January 11, 2012
Location: Indiana
Posts: 1,059
|
1860
333 I,m hopen . I have two box,s of 454 and need to use them .
This is going to be fun . Thanks KEYBEAR |
March 29, 2012, 04:18 AM | #12 |
Senior Member
Join Date: September 8, 2007
Location: Mississippi
Posts: 16,177
|
I'd go with .454
|
March 29, 2012, 06:12 AM | #13 |
Senior Member
Join Date: October 24, 2008
Location: Naples, Fl
Posts: 5,440
|
My two cents
If you cast you own bullets and use metal in which he lead content is down to 95% (and consequently the hardness is a bit high) I would choose the smallest ball that shaves a good ring. This is especially true if you are not using a press. I have used .451s in Pietta ASM, ASP, and Colts but they all seem to like .454s. Actually the pistols don't care. It is I who likes the larger bullets. I cast my own and the bullets are a tiny bit hard.
If you are buying bullets with a high lead content, you can get away with a larger ball.
__________________
Seek truth. Relax. Take a breath. |
March 29, 2012, 09:36 AM | #14 |
Senior Member
Join Date: February 25, 2009
Posts: 643
|
If you are loading off of the gun as Doc Hoy indicates then metal content is of no importance, BUT if you ever intend to load on the gun then the softest you can get is best.
I also learned to my dismay that the harder balls do not swage as well as the softer and can lead to incomplete "ring cutting" and chain fires. If you are using hard alloys then use lubed wads, corn meal or other types of filler under the balls or generous amounts of lube over the balls. Chain fires usually don't hurt anything or anyone but they do make you flinch the next time you pull the trigger. |
March 30, 2012, 04:31 PM | #15 |
Senior Member
Join Date: January 11, 2012
Location: Indiana
Posts: 1,059
|
1860
Got the 1860 today and I like what I see . Fit is very good and will shoot it tomorrow . As for me casting bullets/Balls I ask my wife what she thought and I got the eye roll ? Think I can buy what I need and not burn down the place .
I,m going to use 777 and 20/25gr. with a wad . I did,t get a nipple wrench so I ordered one . Looks like the 454 ball will be fine . KEYBEAR |
March 30, 2012, 04:46 PM | #16 |
Senior Member
Join Date: September 8, 2007
Location: Mississippi
Posts: 16,177
|
Pure 451's tend to move forward under recoil.
|
March 30, 2012, 04:49 PM | #17 |
Junior member
Join Date: August 8, 2009
Posts: 374
|
Mine are hard lead and they don't move.
|
March 30, 2012, 04:51 PM | #18 | |
Senior Member
Join Date: September 8, 2007
Location: Mississippi
Posts: 16,177
|
Quote:
|
|
March 31, 2012, 03:41 PM | #19 |
Member
Join Date: November 28, 2009
Posts: 40
|
One Thing To Keep In Mind
Actually, using a slight oversize SOFT lead ball seems to work the best for me. Here is what I mean:
Compared to a modern, cartridge firing revolver, the rifling inside the barrel of a percussion revolver has very little lead to grab hold of-just the bit of lead on the circumference of the ball that was under the part of the lead ring that was shaved off when the ball was seated! That is why I like slightly oversize SOFT lead balls-the more lead shaved off that forms the ring, the slightly bit more of lead for the rifling to grab. WHAT TO AVOID: A HARD cast lead ball that is too OVERSIZE. You have to have the strength of a GORILLA to seat a HARD, oversize ball in the cylinder!!!! In actual fact, even though I have a casting machine, I generally use the round, swaged lead balls made by Hornady or another ammo maker. Why? Because unlike cast lead balls, Hornady or Speer commercial round balls have no sprue that must be loaded in the cylinder with the sprue centered in the chamber!!!! |
March 31, 2012, 05:31 PM | #20 |
Senior Member
Join Date: September 8, 2007
Location: Mississippi
Posts: 16,177
|
Lee molds only have a tiny flat spot where the sprue was cut. Doesn't matter which way it's loaded.
|
Thread Tools | Search this Thread |
|
|