The Firing Line Forums

Go Back   The Firing Line Forums > Hogan's Alley > Handguns: The Revolver Forum

Reply
 
Thread Tools Search this Thread
Old June 8, 2010, 11:48 AM   #3051
shafter
Senior Member
 
Join Date: December 23, 2009
Posts: 1,624
Anybody have the dates for a Smith Model 10-6 serial number D262xxx

Thanks
shafter is offline  
Old June 8, 2010, 12:30 PM   #3052
FlyFish
Senior Member
 
Join Date: January 20, 2009
Location: Overlooking the Baker River Valley
Posts: 1,723
shafter: 1969 (starting at D90001) to 1970 (ending at D330000), so more likely 1970.
FlyFish is offline  
Old June 8, 2010, 01:28 PM   #3053
shafter
Senior Member
 
Join Date: December 23, 2009
Posts: 1,624
Thanks FLyFish!
shafter is offline  
Old June 9, 2010, 12:44 PM   #3054
Live Free
Member
 
Join Date: February 10, 2010
Location: Texas
Posts: 91
New Request for date of S&W 19-3

I'm looking to purchase a S&W 19-3, serial number 7K76xxx. I appreciate any help with the date and any other details. Thanks in advance for your time.
__________________
-Be Free
Live Free is offline  
Old June 9, 2010, 02:32 PM   #3055
S&WK22
Junior Member
 
Join Date: June 9, 2010
Posts: 1
just got my hands on a mint S&W K22 masterpiece in orginal box with all papers and cleaning parts are included- serial # k491xxx. Any idea of the mfg date? price?
S&WK22 is offline  
Old June 9, 2010, 06:09 PM   #3056
FlyFish
Senior Member
 
Join Date: January 20, 2009
Location: Overlooking the Baker River Valley
Posts: 1,723
Live Free: 1975. Not much detail to add, other than to note that the Model 19 is a very popular revolver, and this one has the desirable - to many - pinned barrel and the recessed or counterbored cylinder (P&R). It's a K-frame with a little beefing up in the yoke area to help it stand up to heavy loads, but it will loosen up a bit quicker than, for example, an N-frame like the Models 27/28. Unless you intend to pound full .357 loads through it day in and day out that's probably not a major consideration, though I'd check it out carefully to make sure that's not what the previous owner(s) did. See Jim March's stickied post at the top of this Forum in that regard.

S&WK22: 1962. In the condition you describe, probably in the $700 range or even more in this neck of the woods (Boston area). Not sure about the rest of the country.
FlyFish is offline  
Old June 10, 2010, 08:59 AM   #3057
Live Free
Member
 
Join Date: February 10, 2010
Location: Texas
Posts: 91
Thanks for information and quick reply FlyFish.
__________________
-Be Free
Live Free is offline  
Old June 10, 2010, 04:08 PM   #3058
tgsavell
Junior Member
 
Join Date: March 11, 2009
Posts: 13
S&W 12-2

Can anyone tell me the year my S&W 12-2 was made?
Serial number D8771XX

Thanks,

Tyson
tgsavell is offline  
Old June 10, 2010, 04:24 PM   #3059
laytonj1
Senior Member
 
Join Date: June 1, 2005
Posts: 4,443
Quote:
Serial number D8771XX
Serial numbers ran from D870001 in 1976 to D999999 in 1977.

Jim
laytonj1 is offline  
Old June 12, 2010, 06:30 PM   #3060
pdr1971
Junior Member
 
Join Date: June 12, 2010
Posts: 1
S&W Model 36

I would like to know the year that our "new" S&W Model 36 revolver was made. the Serial number is J889xxx. Thanks for any help that you can provide.
pdr1971 is offline  
Old June 12, 2010, 08:24 PM   #3061
billcarey
Senior Member
 
Join Date: February 3, 2009
Location: Florida
Posts: 273
32 long ctg year?

Can someone date this old S&W 32 long ctg? It doesn't have a model number.

Serial #27XXX

Thanks
Bill
billcarey is offline  
Old June 12, 2010, 08:24 PM   #3062
FlyFish
Senior Member
 
Join Date: January 20, 2009
Location: Overlooking the Baker River Valley
Posts: 1,723
Quote:
the Serial number is J889xxx.
1981
FlyFish is offline  
Old June 12, 2010, 09:37 PM   #3063
Stinger63
Junior Member
 
Join Date: June 12, 2010
Posts: 4
S&W .357 Magnum

I have numbers all over the darned thing... The serial number I believe is on the butt of the revolver... AHS5XXX

there is also a number on one side under the grips 253X6 surrounded by a S then an F5. On the other side is the number 7670 with a G in a circle and a T inside of a triangle.

The weirdest part of this is on the left side of the frame below the cylinder and above the trigger is the stamped value "W.R.P.D."

Any ideas??
Stinger63 is offline  
Old June 13, 2010, 08:57 AM   #3064
FlyFish
Senior Member
 
Join Date: January 20, 2009
Location: Overlooking the Baker River Valley
Posts: 1,723
Stinger63: AHS5xxx is the serial number - it indicates your .357 was manufactured in 1986. For future reference, the definitive serial number on S&W revolvers is stamped on the butt of the gun, i.e., the bottom of the grip frame where you took yours from; it is sometimes necessary to remove the trips to see it. Letters, numbers and symbols stamped onto the side of the frame under the grips usually mean nothing but can at times indicate that the gun was returned to the factory for refinishing and/or mechanical alterations.

There are a number of possible models it could be (I'm guessing Model 19, but who knows) - you'll find the model number, along with the serial number, and likely a few other numbers and/or letters you can ignore, inside the frame cutout - the part of the frame that's exposed when you swing the cylinder out.

The W.R.P.D stamping most likely indicates the gun was once issued by the "W.R." Police Department, but I have no idea what the "W.R." might stand for.
FlyFish is offline  
Old June 13, 2010, 09:07 AM   #3065
FlyFish
Senior Member
 
Join Date: January 20, 2009
Location: Overlooking the Baker River Valley
Posts: 1,723
billcarey: You appear to have a .32 Hand Ejector Model of 1903 - 1st Change. That particular variation was manufactured from 1904 to 1906, about 50 or so years before S&W started assigning model numbers. When they did, this gun (with some modifications, of course) became the Models 30 and 31.
FlyFish is offline  
Old June 13, 2010, 09:55 AM   #3066
Stinger63
Junior Member
 
Join Date: June 12, 2010
Posts: 4
S&W .357 Magnum - UPDATE

FlyFish: Thanks!... I did some more investigating and found it is the Model 681. The "M" stamped on the yoke indicates it has been returned to S&W for a barrel modification... which is a good thing.. there was a recall back in the late 80-90's.

As far as the W.R.P.D. stamp... I googled it and found many possible interpretations... West Raleigh PD, NC...Warner Robbins PD, GA... Wheat Ridge PD, CO..... I am sure I could find more... but until I get it tracked I won't know for sure. S&W will send me a factory report for $50... but I think I will try getting a local run on it 1st from a friend of mine that has that type of access.

Thanks for your help... if you know of an easier way and cheaper way to get a history report on this revolver please let me know....


Thanks Again,
Stinger63 is offline  
Old June 13, 2010, 10:16 AM   #3067
FlyFish
Senior Member
 
Join Date: January 20, 2009
Location: Overlooking the Baker River Valley
Posts: 1,723
The "M" stamp isn't for a barrel modification, per se - rather, it was a problem with the firing pin and bushing that, with some hot loads, allowed (sometimes, or not really, depending on who you talk to) the primer cup to extrude into the gap and lock up the cylinder. This was an issue with the "no dash" and "-1" models only, and also applies to the 581, 586, and 686. Sorry, don't have any good ideas about finding out more on the WRPD stamp.
FlyFish is offline  
Old June 13, 2010, 10:35 AM   #3068
Stinger63
Junior Member
 
Join Date: June 12, 2010
Posts: 4
Here is the recall info that referenced the M on the yoke indicating it was modified.

http://firearmsid.com/Recalls/FA_Recalls%205.htm

I also have some questions about an old shotgun I have... I am taking pics right now to post then have to figure out how to post them... lol


Thanks!
Stinger63 is offline  
Old June 13, 2010, 11:01 AM   #3069
Stinger63
Junior Member
 
Join Date: June 12, 2010
Posts: 4
Hopefully this worked..

The Name in Pic #6 is "Expert"

As far as I can tell the text in Pic #7 says:

PATENTED
Dec. 15, 91, AUG 11,96, AUG 14 00, MAY 27, 02

I am presuming that the dates are 1891, 1896, 1900, and 1902...

The shotgun is a 12ga.. last time it was shot was by me in 1979.. high on a hill I shot a 12ga slug at a 16pt buck laying on the edge of the filed below me. I shot... and the thing knocked me on my ass bumping my head on the 641/2 Mustang behind me.... the shot hit right in front of him... he got up very calmly and walked off... the shell had expanded in the breech and I had to get into the car and get a screw driver to get it out... by the time I was reloaded... he was on the other side of the field walking down the river embankment... he never ran... un-fricking believable??? I don't blame you.. I was dumbfounded... never went deer hunting again...

Anyway here are the pics... all I have found out it that it possible may have a "Damascus" barrel and I should be careful what shells I use...

Last edited by Glenn E. Meyer; November 30, 2013 at 11:47 AM.
Stinger63 is offline  
Old June 13, 2010, 11:22 AM   #3070
billcarey
Senior Member
 
Join Date: February 3, 2009
Location: Florida
Posts: 273
Quote:
billcarey: You appear to have a .32 Hand Ejector Model of 1903 - 1st Change. That particular variation was manufactured from 1904 to 1906, about 50 or so years before S&W started assigning model numbers. When they did, this gun (with some modifications, of course) became the Models 30 and 31.

Flyfish, thanks for the info. This was purchased new by my great grandfather and passed to me by one of his daughters about 20 yrs ago. It shows little use but has some pitting on one side of the cyl. Is this a black powder gun? It's only been a display gun for me and I've never fired it.

BC
billcarey is offline  
Old June 13, 2010, 11:42 AM   #3071
FlyFish
Senior Member
 
Join Date: January 20, 2009
Location: Overlooking the Baker River Valley
Posts: 1,723
Bill - the .32 S&W Long, like the .38 Special, .45 Colt and some other cartridges, began life as a black powder cartridge and was later loaded with smokeless. Factory ammo is still reasonably widely available, in part because of its popularity as a low-recoil centerfire round for high-end bullseye target shooting.

I don't know if the transition to smokeless had been made by the time your gun was manufactured, but the SAAMI spec for the cartridge is only 15,000 CUP, so I'm tempted to say that you'd be fine with modern ammo, but you should talk to a gunsmith or perhaps give S&W a call to confirm that. I have a Walther GSP target pistol in .32 S&W Long that's a real joy to shoot - it's a fun little cartridge that has a reputation for great accuracy and hardly produces any more recoil than a high-speed .22 LR.
FlyFish is offline  
Old June 13, 2010, 12:16 PM   #3072
billcarey
Senior Member
 
Join Date: February 3, 2009
Location: Florida
Posts: 273
Flyfish,
I've been shooting another S&W .32 lg ctg since the late 1970s with smokeless but that gun dates 1928. Yes they are fun guns. I'll have to recheck the early model if I decide to reload for it. Maybe I'll try black powder too.

Thanks,
Bill C.
billcarey is offline  
Old June 13, 2010, 01:04 PM   #3073
103
Junior Member
 
Join Date: June 13, 2010
Posts: 1
Hey guys, I have a serial I'd like dated. I thought I was a member here, but I just had to register--oh well.

It's a 28-2, sn N2670xx
103 is offline  
Old June 13, 2010, 04:21 PM   #3074
OsageStick
Junior Member
 
Join Date: May 31, 2010
Posts: 12
.22 SW

Need info on SW .22 revolver
Model 43
6 rounds
3.5" barrel
weighs 14oz
sn M388xx

How old?
OsageStick is offline  
Old June 13, 2010, 04:38 PM   #3075
FlyFish
Senior Member
 
Join Date: January 20, 2009
Location: Overlooking the Baker River Valley
Posts: 1,723
103: 1974 (starting at N200000) to 1977 (ending at N299999)

OsageStick: 1971 (starting at M30001) to 1973 (ending at M60000)
FlyFish is offline  
Reply

Tags
s&w 686

Thread Tools Search this Thread
Search this Thread:

Advanced Search

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off

Forum Jump


All times are GMT -5. The time now is 10:31 AM.


Powered by vBulletin® Version 3.8.7
Copyright ©2000 - 2024, vBulletin Solutions, Inc.
This site and contents, including all posts, Copyright © 1998-2021 S.W.A.T. Magazine
Copyright Complaints: Please direct DMCA Takedown Notices to the registered agent: thefiringline.com
Page generated in 1.01392 seconds with 11 queries