August 13, 2018, 05:31 AM | #1 |
Junior Member
Join Date: August 12, 2018
Posts: 1
|
Lee Enfield NO4 Mk1 *
Hello, I'm new here, i'm from Belgium and 26.
I'm planning to buy a Leen Enfield NO4 Mk1* with a repro scope. As you can see on the photo: NO4 MK1* Long Branch 1943. So in my opinion this Lee Enfield is made in Canada. But if you look at the other picture you can see on the sighter a stamp "ENGLAND". I'm not sure, but i don't think this is right? What is the market price for this gun? Thx!! |
August 14, 2018, 12:00 PM | #2 |
Senior Member
Join Date: February 13, 2002
Location: Canada
Posts: 12,453
|
"...stamp "ENGLAND"...." Hi. That's just an importer's stamp required by the U.S. Means the rifle was in England at some time. There should be the 'BNP' proof stamps on it too. Proofing is required by the Brits on any milsurp sold through there.
The 'Long Branch' stamp does mean it was made here. Grew up about 5 miles from the factory. Been in the building after our idiot government closed the place in 1975. The building is gone now. Nothing left at all. Long Branch is now part of the City of Mississauga, Ontario. The plant was at what is now Dixie Rd and Lakeshore Rd. on the South side. Anyway, get proof of good headspace before you buy it. Lotta Lee-Enfields have been assembled out of parts bins with no QC. The bolt head isn't necessarily the original bolt head. And slug the barrel. Not all of 'em are .311" diameter. They can go to .315" and still be considered ok. Issue is that ammo, both commercial hunting and milsurp, use .311" or .312" diameter bullets. It's value will be decidedly different in Belgium than they are here or in the U.S. However, condition is everything. Some good Lee-Enfield sites. http://www.303british.com/ http://www.allaboutenfields.co.nz/history/markings/ Can't see your pictures well. Too dark.
__________________
Spelling and grammar count! |
August 16, 2018, 11:07 PM | #3 |
Junior member
Join Date: October 20, 2012
Posts: 5,854
|
Great rifle that is still being used as a combat rifle all around the world even to this very day.
|
August 30, 2018, 01:41 PM | #4 |
Senior Member
Join Date: April 11, 2013
Location: High up in the Rocky Moun
Posts: 665
|
I've had a Long Branch No.4 Mk1* for 50 years. Shot the hell out of it when MilSurp ammo was available and cheap.
Wolf is now making steel case military ammo for a reasonable price, so it's going to be shot again very soon.
__________________
The soldier's pack is not so heavy a burden as the prisoner's chains. Dwight Eisenhower It is very important what a man stands for. But it is far more important what a man refuses to stand for. |
September 1, 2018, 07:46 PM | #5 |
Senior Member
Join Date: November 11, 2006
Posts: 2,519
|
FYI: if you reload. adjust the sizing die..
to just "neck size" the fired case.
The British Army, wanted any ammo picked up on the battlefield, to chamber and fire, no matter how dirty / muddy the round . In this matter, the chamber has a 1/16 " clearance at the chamber. Remember the case has a rim. so full lenght resizing will SHORTEN case life. Neck sizing will extend case life. Good luck.h |
September 4, 2018, 09:37 AM | #6 |
Senior Member
Join Date: August 15, 2011
Location: Virginia
Posts: 179
|
Neck size with Lee Collet die and use Sierra 174 match bullets and an appropriate dose of 3031 and it'll shoot like a match rifle
|
Thread Tools | Search this Thread |
|
|