|
Forum Rules | Firearms Safety | Firearms Photos | Links | Library | Lost Password | Email Changes |
Register | FAQ | Calendar | Today's Posts | Search |
|
Thread Tools | Search this Thread |
July 15, 2018, 06:49 PM | #1 |
Senior Member
Join Date: January 4, 2016
Posts: 757
|
CZ 527 Owners...Lend Me Your Ears
Hi all,
I've had a cz527 in 7.62x39 for the past few years. Its an excellent rifle but as some of its fans may know, the stock is subject to cracking behind the action. I recently have had that problem. I contacted CZ and they're willing to replace the stock but I'm thinking this may be a good time to upgrade to a Boyds stock. Here's my question; On the boyds website they ask you to differentiate between the cz527 American or varmint rifle. I don't know the difference, I thought it was just the 527 carbine. Any idea on what the differences are? Thanks! |
July 15, 2018, 07:33 PM | #2 |
Senior Member
Join Date: December 7, 2009
Location: Western New York
Posts: 2,736
|
Yeah, visit CZ USA and read about it. It explains all the differences and shows all the models. I've never heard about any cracking problem until I read your post.
|
July 15, 2018, 07:35 PM | #3 |
Senior Member
Join Date: September 8, 2007
Location: DFW, Texas
Posts: 2,475
|
The 7.62x39 doesnt come in the Varmint configuration to my knowledge. And to that point, varmint is just a different/heavier barrel with no sights.
Love my 7.62x39 527 carbine and hope I don’t have the cracking issue. A quick look on the CZ website confirms my earlier comments.
__________________
"Laws that forbid the carrying of arms...disarm only those who are neither inclined nor determined to commit crimes...Such laws make things worse for the assaulted and better for the assailants; they serve rather to encourage than to prevent homicides, for an unarmed man may be attacked with greater confidence than an armed man." - Thomas Jefferson, 1776 Last edited by precision_shooter; July 15, 2018 at 07:41 PM. |
July 16, 2018, 05:46 AM | #4 | |
Senior Member
Join Date: August 22, 2015
Location: new england
Posts: 1,159
|
Quote:
Boyd's is pretty far from an upgrade in my book. The American would be the correct (or best fit) stock for a carbine, but; it might need a slight bit of fitting around the rear sight. The OP might look for a kevlar stock if he wants an actual upgrade. |
|
July 16, 2018, 07:23 AM | #5 |
Senior Member
Join Date: November 18, 2005
Location: On the Santa Fe Trail
Posts: 8,248
|
Why pay for a Boyd's stock when CZ is willing to replace the stock? Where is your crack at in your stock, the tang? Often times if the tang isn't properly relieved a Mauser action will crack the stock in the tang area.
__________________
NRA Life Member |
July 16, 2018, 02:20 PM | #6 |
Senior Member
Join Date: July 20, 2016
Location: Upstate NY.
Posts: 901
|
I wouldn't go with Boyds on this one. The draw of the CZ 527 is it's light weight and classic looks. Laminate ruins both of those.
__________________
In God we trust. |
July 16, 2018, 05:25 PM | #7 |
Senior Member
Join Date: January 4, 2016
Posts: 757
|
I may just go with the replacement stock but am exploring options. Boyds makes a very good looking stock which is why I'm drawn to it, I'm not concerned about weight as it never leaves the bench.
Fourbore, I have to disagree, a quick Google will show it is a known problem. |
July 16, 2018, 05:38 PM | #8 |
Member
Join Date: February 15, 2010
Posts: 92
|
I've heard of several CZ 527 carbine stocks cracking, and CZ has replaced them without issue. I know it's a pain to send the rifle back but let them fix it right. There are several threads about the problem if you do a google search, even on youtube. I believe they adjust or reposition the recoil lug in the replacement stock. My 527 carbine has about 250 rounds through it, no cracks yet and I'm keeping my fingers crossed.
|
July 16, 2018, 08:31 PM | #9 | |
Senior Member
Join Date: November 18, 2005
Location: On the Santa Fe Trail
Posts: 8,248
|
Quote:
__________________
NRA Life Member |
|
July 18, 2018, 09:43 PM | #10 |
Senior Member
Join Date: January 6, 2008
Location: Northeast Colorado
Posts: 1,993
|
Some people like laminate stocks. Some like thumbhole stocks. Boyds makes a nicely finished stock, and the two I have experience with fit onto the rifle very nicely. So do what turns your crank. Personally, kevlar or composite of any type is unattractive.
|
July 19, 2018, 05:18 AM | #11 |
Senior Member
Join Date: May 22, 2007
Location: Arizona
Posts: 5,299
|
I swapped my 7.62x39mm 527M carbine to a custom stock years ago - original is still around SOMEWHERE in the closet, but i never cracked. I had heard this on some Carbine models. Let CZ take care of it - they have excellent customer service. I love my little Carbine - with cast bullet loads I have fun all day long.
|
July 20, 2018, 01:47 AM | #12 |
Senior Member
Join Date: October 30, 2016
Posts: 211
|
I looks to me that the crack originates at the rear screw hole. I bet if you epoxy in a pillar right off the bat it wouldn't crack. Wood cracks along the grain and if you bind that grain at origin point it should not crack.
|
July 22, 2018, 10:32 AM | #13 |
Senior Member
Join Date: March 22, 2011
Posts: 256
|
I have two of them, one is 7.62x39, the other is .223. I use them with my niece as plinkers from time to time. Cool little guns, don't have a lot of rounds through either. Will keep an eye on them for cracks.
|
July 22, 2018, 07:02 PM | #14 |
Senior Member
Join Date: October 30, 2016
Posts: 211
|
It cracks because recoil is being disbursed into the stock at that point. That's purely a bedding issue.
Steel bed the action so the lug has a solid abutment. Pillar the action screws so that point of the stock is re-enforced and the apex of a crack can't form. According to my rough calculations that barreled action is delivering 20 foot pounds of energy to the stock Fine if it is where the stock is designed to take it, but not at the rear tang. Last edited by armednfree; July 22, 2018 at 07:32 PM. |
|
|