The Firing Line Forums

Go Back   The Firing Line Forums > The Skunkworks > The Smithy

Thread Tools Search this Thread
Old October 11, 2018, 10:53 PM   #1
Junior Member
Join Date: October 11, 2018
Posts: 2
Citori 725 Sporting safety switch issue

So, I got this almost new. Less than 100 rounds fired. I have put another 1,000 maybe through it. I shoot trap, skeet and sporting clays and a few live pigeon. As such I NEVER load the weapon until on the line ready to say PULL. So I never use the safety - no need. I have been snake bit in the last few shoots because my safety switch "slips" on. Not sure if there is slack, but my thumb is trained to never touch it. Lost the last match with 2 slips in a 15 bird run. Tighten, completely dis-engage, super glue in position or remove? I use this gun for competition ONLY. Never for walking across the field loaded.
Part 2. Is this something I can do? Or do I need to have a professional do it?
Did I mention that we do a "Columbine" type shoot? With 30 + shooters this adds up into the $30k range
thomasken is offline  
Old October 12, 2018, 05:11 AM   #2
Senior Member
Join Date: February 7, 2008
Location: pa.
Posts: 2,094
I have six browning o/u,s and two browning double barrel,s and never had any problems with safeties. I say a trip to a good gunsmith will get the problem fixed or a browning repair station.
eastbank is offline  

Thread Tools Search this Thread
Search this Thread:

Advanced Search

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off

Forum Jump

All times are GMT -5. The time now is 01:06 AM.

Powered by vBulletin® Version 3.8.7
Copyright ©2000 - 2019, vBulletin Solutions, Inc.
This site and contents, including all posts, Copyright © 1998-2018 S.W.A.T. Magazine
Copyright Complaints: Please direct DMCA Takedown Notices to the registered agent:
Contact Us
Page generated in 0.05998 seconds with 10 queries