February 5, 2014, 06:29 PM | #26 |
Member In Memoriam
Join Date: March 17, 1999
Posts: 24,383
|
Just some bits of info.
The word "Parabellum" is from the Latin phrase "Si vis pacem para bellum", meaning "If you want peace, be prepared for war." It was used by Deutsche Waffen-und Munitions Fabriken (German Arms and Ammunition Manufacturers) as a cable address, in the early 1900's. In those days, a cable address was used to eliminate the need to transmit a long address. Just "Parabellum Berlin" - no need for a street address, the cable company knew it, or the company itself had a telegraph office. It was, in a sense, the late 19th and early 20th century equivalent of a URL. DWM had made the Borchardt and was the original maker of the Luger, so they gave their new pistol the name which, by that time, had become the company motto. Whether Georg Luger played any role in the selection of the name "Parabellum", I don't know; probably it came from the marketing department. Later, they called their machinegun by that name also. P.08 or Pistole 1908 is the German army designation, from the date of adoption, like "Model 1911" is for the U.S. pistol. The German Navy called it the P.06 because they had adopted it two years earlier. In spite of widespread interest, and some adoption, outside Germany, the design proved ultimately to be a dead end. Efforts were made after WWII to revive it as a commercial proposition but, in spite of much ado and many people claiming that they would buy a new Luger, Mauser and Interarms took a bath on the new production gun. A good lesson for those thinking of entering the gun business not to believe the "sure I will buy one" crowd unless they are willing to come up with firm, cash orders. The name Luger is commonly used in the U.S. both because it was trademarked by Stoeger but also because the ammunition was so designated by SAAMI, so the "official" name in this country is "Luger." Jim |
February 5, 2014, 07:38 PM | #27 |
Senior Member
Join Date: November 23, 2009
Posts: 3,963
|
I've heard it would cost $3,000 in machining and tooling work to make and assemble a Luger today, so that's certainly one reason it's not going to make a comeback.
I recall back in the 1960's a writer said the Mauser C96 couldn't be made for less than $2,000. In today's dollars that's about 8 grand or more. Lugers and Broomhandles are a bargain, given what they cost today. |
February 5, 2014, 08:55 PM | #28 |
Member In Memoriam
Join Date: March 17, 1999
Posts: 24,383
|
Of course those figures are based on "if they made them the same way as they did back then." Today, with good casting and MIM parts, they would be cheaper. But then, they wouldn't be Lugers or Mausers or whatever, they would be cheap copies that no one would buy. IMHO, the folks who want to "bring back" the Mauser C96, or the Luger, or the Colt Paterson, or the M1903 Colt hammerless are not likely to get their wish unless they can get a whole bunch of folks with cash in their hot little hands to sign on.
The hard fact is that the demand isn't there and the designs are complex enough that no company it its right collective mind would bet the factory that people will buy a century old design just on a nostalgia kick. Especially when plenty of originals are still around at reasonable prices. Jim |
February 6, 2014, 11:39 AM | #29 | |
Senior Member
Join Date: August 30, 2009
Location: Northern AZ
Posts: 7,172
|
Quote:
Last edited by gyvel; February 6, 2014 at 11:57 PM. |
|
February 6, 2014, 03:56 PM | #30 |
Senior Member
Join Date: March 1, 2000
Location: Boise, ID
Posts: 8,518
|
A guy with a CNC mill and proper dimensions could make a C96 for the price of the materials. Today, the problem is coming up with "drawings" for a given gun.
While Vltor has been diddling around with reengineering the Bren Ten for five years, a guy wrote the necessary programs and has made Bren Ten frames and slides in his basement. A buddy of mine who works in aerospace has toyed with making a 1911 on his lunch hour, as the CAD work has already been done and is available on the internet. |
February 9, 2014, 03:47 AM | #31 |
Member In Memoriam
Join Date: March 17, 1999
Posts: 24,383
|
Nothing personal, but I never cease to be amused by folks saying that "with modern machines" gun X could be made for $2.00 and sell for $200.00" or something like that.
OK, so why is no one doing that? A manufacturer's license is not that expensive, and if that kind of money can be made that easily, why are gun companies still making guns basically the old fashioned way? Jim |
February 21, 2014, 02:27 PM | #32 | |
Senior Member
Join Date: August 30, 2009
Location: Northern AZ
Posts: 7,172
|
Quote:
|
|
February 21, 2014, 02:37 PM | #33 |
Member In Memoriam
Join Date: March 17, 1999
Posts: 24,383
|
Borchardt didn't need to wait for Maxim. Take a look at a Henry or a Winchester 73 (Borchardt worked for Winchester) or a Savage Navy revolver. All use toggle links to lock the action in firing.
Jim |
February 21, 2014, 02:55 PM | #34 |
Senior Member
Join Date: August 30, 2009
Location: Northern AZ
Posts: 7,172
|
That's true, Jim. I was thinking more along the lines of self-actuating guns.
|
February 21, 2014, 06:26 PM | #35 | |
Senior Member
Join Date: March 1, 2000
Location: Boise, ID
Posts: 8,518
|
Quote:
Colt is still using some machinery from WWI and WWII, it's probably been paid-off, so continuing to use that equipment is "free". Buying new CNC equipment to replace it is expensive. That's probably why they still do a lot of their manufacturing very much like they were doing it decades ago. 1920 Commercial "shooter". Spent case is visible in this one: Last edited by RickB; February 21, 2014 at 06:49 PM. |
|
February 21, 2014, 09:59 PM | #36 |
Member In Memoriam
Join Date: March 17, 1999
Posts: 24,383
|
But surely if "a guy with a CNC mill and proper dimensions could make a C96 for the price of the materials." and someone in aerospace could "make a 1911 on his lunch hour", a business should be highly profitable. While I doubt that there is a huge market for C96 clones, surely one made for under $10 should sell at enough to make the project enormously successful.
Jim |
February 21, 2014, 11:38 PM | #37 |
Senior Member
Join Date: March 1, 2000
Location: Boise, ID
Posts: 8,518
|
You're being obtuse. It's like the guy who says, "I don't run a business, but . . .", and then goes on to prove why he doesn't run a business.
|
February 22, 2014, 08:35 PM | #38 |
Member In Memoriam
Join Date: March 17, 1999
Posts: 24,383
|
No, I am being practical. If turning out guns were as simple as you say it is, a lot more companies would be doing so, and we would have top quality repros of those old timers available at bargain prices. The fact is that many people SAY they would buy a newly made C96, or Colt pocket model, or Luger, or whatever, but if copies were offered to them they would object that the guns are "not original" and not wanted.
Here is my challenge. Find capital and set up a business. Make a good copy of the C96 for under $500 retail, and I promise to buy one. If you choose to copy the Colt Model M or the Luger, same deal. But no vaporwear or statements that someone somewhere somehow can make such and such for ten bucks (the cost of materials); make it, and I'll buy it. If it costs $10, you make $490 profit. Jim |
February 23, 2014, 12:40 AM | #39 |
Senior Member
Join Date: March 1, 2000
Location: Boise, ID
Posts: 8,518
|
See post 37.
|
February 23, 2014, 02:31 PM | #40 |
Staff
Join Date: March 11, 2006
Location: Upper US
Posts: 28,833
|
James, I think you ought to price 4 point carbon steel these days, you aren't gonna make any gun out of $10 worth of steel today.
Other than that, I agree. And I did buy a Luger year before last. NIB, made of stainless steel. 9mm, faithful execution of the P.08. And as I later learned, just enough off "spec" that other Luger magazines won't work. And no, it wasn't $500, more like twice that... So it isn't that there's NO market, just that isn't much of one....
__________________
All else being equal (and it almost never is) bigger bullets tend to work better. |
February 23, 2014, 03:12 PM | #41 |
Member In Memoriam
Join Date: March 17, 1999
Posts: 24,383
|
Interarms and Mauser lost some big bucks a while back when Mauser, with Interarms backing, obtained the Swiss tooling and resumed Luger production. Every market survey indicated an enthusiastic response to the idea and there was near universal agreement that such a gun would have an immense sale.
They did sell (I have one of each version) but in nowhere near the numbers the surveys had predicted. Typical comments were "not historical", "an original isn't much more costly", "I want one with swastikas on it", etc. In other words, it was one of those things everyone wants until it comes time to actually shell out the shekels. On the $10, I was having some fun; even the steel would cost more today, but the original "price of the material" idea will work only if the maker works for free and doesn't count any other costs, like the price of his CNC machine. Not a great business model. Jim |
February 23, 2014, 07:40 PM | #42 |
Staff
Join Date: March 11, 2006
Location: Upper US
Posts: 28,833
|
I always figured that the reason the Mauser Lugers didn't sell as well as they expected was because they built the wrong Luger.
Swiss pattern Lugers just don't "look right", the "handle" is wrong.... and that's those who aren't looking for the historical piece. As Max Smart used to say, "missed it by that much..." (holds up fingers just slightly apart) The hobbyist can make anything they want, their time and tools are paid for by something else. A business has to be paid for by the product, and ALSO show a profit. Big Difference.
__________________
All else being equal (and it almost never is) bigger bullets tend to work better. |
February 23, 2014, 08:42 PM | #43 | |
Senior Member
Join Date: June 18, 2009
Location: NorthWest USA
Posts: 1,996
|
Quote:
In regard to the Mitchell's Mausers stainless steel Luger - they were beautiful but I've also heard there have been problems. I didn't know they wouldn't work with standard magazines, that was a huge error on their part! I wonder if stock mags can be tweaked a bit to fit? |
|
February 23, 2014, 10:53 PM | #44 |
Member In Memoriam
Join Date: March 17, 1999
Posts: 24,383
|
Mauser built both types, which is what I meant when I said I had both versions. The first was a copy of the Swiss pistol and didn't sell well. After receiving comments like those of 44 AMP and Quentin2, and with surveys saying that a German-type Luger would surely sell much better, Mauser changed tooling and produced a gun that was a copy of the WWII P.08. IIRC they didn't even sell as well, though I don't have the production figures in front of me.
My point is still that folks who claim they would buy this or that gun if it were only made, won't put "their money where their mouth is" when the gun is put in front of them. Jim |
February 23, 2014, 11:08 PM | #45 |
Senior Member
Join Date: October 25, 2001
Location: Alabama
Posts: 18,541
|
I recently looked hard at an Interarms Parabellum.
It was a 6" 1906 pattern with grip safety. Top condition, manageable price. The grips were nearly flat with edges beveled to the frame and it took a lot of squeeze to depress the grip safety. It looked good but it didn't FEEL right. Pass. |
February 24, 2014, 02:19 PM | #46 |
Staff
Join Date: March 11, 2006
Location: Upper US
Posts: 28,833
|
My stainless steel Luger isn't a Mitchel's Mauser.
its a Stoeger American Eagle Luger. Made in Huston, Texas! The mag catch is just a tiny bit "off" to work with an original mag. Otherwise, its a jewel! ok, semi-precious stone... but I can plink and play with a Luger, without risking my 1936 Wa Pruf S/42!
__________________
All else being equal (and it almost never is) bigger bullets tend to work better. |
March 12, 2014, 10:16 AM | #47 |
Senior Member
Join Date: September 28, 2010
Location: Pinckney,Michigan
Posts: 151
|
very interesting read and full of great information.
to hold one and shoot one is in itself a very cool experience ....a piece of history indeed, I don't usually post to much about what I own but in this case I just can't help myself. I own a 1914 Erfurt # matching with both mags matching, although the firing pin is a replacement (still have org.) so as to shoot it from time to time. this was a "bring back" from the second WW. Matt. |
March 16, 2014, 09:13 PM | #48 |
Member In Memoriam
Join Date: March 17, 1999
Posts: 24,383
|
There is an article on the Luger (first of a series) in Shotgun News this week. Unfortunately, the author, when discussing how the gun actually works, blows a lot of smoke and stuff about "the Calculus", really proving that he has no idea how the Luger works. (P.S., it has nothing to do with Calculus.)
He says the U.S. testers were responsible for the change from 7.65 to 9mm; AFAIK, it was the German Army that wanted that change, not the U.S. He also says that heat coloring (as in "straw" coloring) is also called case hardening. Not true; it might be part of a hardening of a given part, but case hardening is a different process; in fact heat coloring can remove case hardening. Otherwise, the article is not too bad, though there is no new information. Jim |
March 16, 2014, 09:26 PM | #49 |
Senior Member
Join Date: October 25, 2001
Location: Alabama
Posts: 18,541
|
The first user of 9mm P that I know of was the German Navy, 1904.
The army did not pick it up until the well known P08. Not unusual, the navies of the world used to be the high tech service... until the air forces came along. The US Army checked it out in 1903, though, for comparison with the 1900 .30s. The heat color chart in Brownells shows straw as characteristic of tempering at 435 - 465 deg F. |
March 16, 2014, 11:53 PM | #50 | |
Staff
Join Date: March 11, 2006
Location: Upper US
Posts: 28,833
|
Quote:
Everything I've ever seen agrees it was the German army who refused to adopt the Luger in .30 caliber. Without some hard reference to the contrary, one wonders if the writer did even basic research. IF so, apparently, not enough...
__________________
All else being equal (and it almost never is) bigger bullets tend to work better. |
|
|
|