|
Forum Rules | Firearms Safety | Firearms Photos | Links | Library | Lost Password | Email Changes |
Register | FAQ | Calendar | Today's Posts | Search |
|
Thread Tools | Search this Thread |
April 22, 2007, 06:26 AM | #1 |
Junior member
Join Date: April 7, 2007
Location: New York State, up north
Posts: 274
|
.222 Remington ballistics
Good morning. I have an old savage model 840 E .222 Rem. It wasn't much when I aquired it but since then I've done away with the barrel band and glass bedded the old girl. I now use pressure on the barrel. It shoots as well as the cartridge will reach. Meaning that as long as I can figure the drop correctly, the rifle groups well enough for woodchucks. A 22-250, or swift, she isn't However, my question is on barrel length. When I got it I noticed the barrel was bulged about 6-8 inches from the muzzle. I cut and crowned the barrel to remove the bad section and now it's a true carbine. About 17". Just long enough to be legal but quite handy. I want to use it for a modest range woodchuck rifle. Does anyone know how much the little shell will give up with a short tube? I believe it used to be a 24". I was wondering about my own theory that maybe a modest cartridge like the .222 wouldn't be significantly hurt by the shorter tube. Any information or experiences would be greatly appreciated. Thank you.
|
April 22, 2007, 11:14 PM | #2 |
Senior Member
Join Date: March 13, 2007
Location: SoCal
Posts: 801
|
A shorter bbl is a shorter bbl regardless the calibre. Seek out the fastest powder for the 222, go to a range that gives you at least 300 yards and shoot at 25, 50, 100, 150, 200, .... Pretty easy to develop your own table.
I like H322 in my 222 but I have the original longer bbl on it.
__________________
"Outlaw guns and only outlaws will have guns!" Unfortunately, we may be moving in that direction. NRA Benefactor, Conservative!, VN '64-'65. Never sell a gun or a car ... and retire rich! |
|
|