|
Forum Rules | Firearms Safety | Firearms Photos | Links | Library | Lost Password | Email Changes |
Register | FAQ | Calendar | Search | Today's Posts | Mark Forums Read |
|
Thread Tools | Search this Thread |
October 22, 2017, 01:36 PM | #1 |
Junior member
Join Date: January 18, 2010
Location: Lampasas Texas
Posts: 154
|
Curiosity question about cans/mufflers/silencers
Over the all the years I have been alive, 62, I have been some what astounded by the COSTS of some items. And I know full well the relationship between supply and demand.
Funny/curious -- Is how I can buy a very high end desktop computer with a LOT of capability in the $300 to $700 range but a simple Smart phone with partial capability and limited service life can easily cost $700~$900 Just an example of something... in my example, the bill of materials, total parts count, and great life span of the Exponentially larger desk top vs the ubiquitous Smart phone.. Say an Apple I-8 or Samsung Galaxy S8 in these cases the total sales volumes ... now ranging in the millions of units per release... vs hundreds of thousands for the desk top So back to the mufflers/suppressors/silencers While setting up a Rem 700 R-5 308 and getting stuff at my LGS I saw several "CANS" in the display case for $680~$2300 most in 9mm, 308, 10mm. I am retired Army My weapons are all acquired over my life time. Though during Obama, I did set out to learn reloading and acquire a few Might be never to be had again items...like a AR-15 copy of my issued AR-16 A-3....never did think nor desire 3 rnd burst selector--- but did know I could get a legal version with the proper ATF hoop jump and cost... more to the point, I do not keep up with all the NFA stuff So curiosity on suppressors got me to learn that for a few hundred and about a year wait I could put a muffler on a weapon...cool BUT I am seriously head scratching about the COST of the item itself... NONE are rocket science None are any special unobtainable material None require and massive hours on a CNC or forged/machined labor process None have any moving parts IMO Are you out of your mind paying $600 or up to 5 times more for an easy to manufacture passive part that has a total cost of under $50 in materiel, near zero in R&D, and obviously some (but unknown to me) cost in licensing with ATF Where is the competition? Perhaps I am naive and the XZY $600 308 suppressor unit in my LGS is $600 because the MFG has to pay $500 per unit to ATF to produce IT.... my common sense sez that is false I guess I do not understand why ....given a legal way to have something that should generate a LOT of sales... there are so few producers and such outlandishly high costs.....IMO relative to the complexity of a functioning firearm with many moving parts assembled, warranted, for a lot less cost What I really mean is.. Why can I not go into any gun store anywhere and NOT SEE 10 brands of this particular item for $89.99 to $999.99 just like a functioning fire arm For what it is worth I supervised/ran a machine shop NOT new modern CNC that made much more complex items and with very few stations (7) we put out several hundreds of units per day BTW I get it about diameter, length weight baffle design, advertised Db reduction and a lot on the marketing end I do not get the extreme cost and marketing plan... Opinion as a frugal guy who usually likes to get the best stuff The 308 7 inch light weight smaller diameter anodized black suppressor at my LGS is $1700 For that amount I want full concierge service, a lawyer, forms filed for me and the damned thing hand delivered and installed OK guys lots of hours crewing Army helicopters...off to the trunk to break out my Nomex flight suit...I accept the flames |
October 22, 2017, 07:32 PM | #2 |
Senior Member
Join Date: November 20, 2000
Location: Ohio
Posts: 3,968
|
First of all, you can make your own suppressor after filing a form 1 and getting the stamp back. So, if it is as easy as you say (and I am not disputing this) make your own.
But one thing a lot of people don't seem to understand is that price often has very little to do with what it costs the manufacturer to produce. The price is set by the market. They cost what they do because people are willing to pay for it. If "they" priced a suppressor at $900 and nobody would buy one, they would lower the price until people started buying them. It's a simple fact of business that you try to sell your product for as much as you can. That is why you are in business. If people buy your product for $900, why would you sell it for $500 ? I think that another aspect of this is that people that buy NFA weapons are not typically the redneck. The people who buy NFA weapons have disposeable income. This is just a guess on my part, but I would be willing to bet that if a suppressor costs $400, most gun owners wouldn't buy one simply because of the $200 tax stamp. So why try to cater to that demographic ? The people that buy suppressors arn't AS concerned about the $200 stamp. And it isn't just all about the money: it is the mentality of people who buy stuff like suppressors. They enjoy their toys and don't have a problem spending money on toys.
__________________
You know the rest. In the books you have read How the British Regulars fired and fled, How the farmers gave them ball for ball, From behind each fence and farmyard wall, Chasing the redcoats down the lane, Then crossing the fields to emerge again Under the trees at the turn of the road, And only pausing to fire and load. Last edited by 444; October 22, 2017 at 07:38 PM. |
October 22, 2017, 08:49 PM | #3 |
Senior Member
Join Date: March 20, 2011
Location: Willamina, OR
Posts: 1,908
|
I think that if the law changes, we will see serious competition in the silencer/suppressor market... Right now they're made in such low quantities that there is a lot of hand work and small batch manufacturing. When sales go up, then we'll see them made in larger numbers and quantities of scale will kick in to bring prices down.
I could make my own silencer that would work but I'd probably have to spend $1500 on equipment to make it. As much as I'd like to have that equipment, I don't know where I'd put it... Tony |
October 23, 2017, 08:55 AM | #4 |
member
Join Date: June 12, 2000
Location: Texas and Oklahoma area
Posts: 8,462
|
I'd guess there is no money in making budget suppressors. Nobody wants to pay a $200 tax on a $50 suppressor; but they'll pay a $200 tax on a $1200 suppressor made out of titanium with a quick detach mount and a half decibel advantage over the competition.
Also, I think some of the engineering problems (maximum suppression or eliminating zero-shift) are more complex than you give credit. |
October 23, 2017, 08:57 AM | #5 |
Senior Member
Join Date: October 21, 1998
Location: Colorado, USA
Posts: 4,298
|
Suppressors are way overpriced across the board. There have been a few sub $200 for rimfire, and they don't sell well. Perceptions are flawed in the space.
There are some guys here local that do the Form 1 and make their own. Typically, they have $100 to $200 in them and they are, performance wise, in the same bracket as the $1k+ suppressors. The technology is not secret or even that complicated. Many manufacturers try to overly complicate their designs hoping to set themselves apart in some manner, but it is mostly marketing. Most of the $1K+ suppressors have more expensive materials (Ti, Inconel) though. I had a AR9 integrally suppressed barrel made by a local smith to my specs for less than I could buy just a suppressor. There are more and more shops out there doing custom, and one-off stuff at about the same price point as the mass produced ones, so that is more appealing to me personally. |
October 23, 2017, 09:54 AM | #6 |
Senior Member
Join Date: November 20, 2000
Location: Ohio
Posts: 3,968
|
I have a couple of the .22LR suppressors that I see are currently selling for $235 ( http://www.tacticalinc.com/tac65-22l...ssor-p-38.html ) and they work fine. As good as anything else. I am completely satisfied with the product and wouldn't hesitate to buy another one.
A .22LR suppressor can be made out of inexpensive materials and there is no problem. I have a .22LR suppressor that is made out of aluminum and I have owned it for probably 15 years and put MANY thousands of rounds through it and it is just as good as the day I bought it (other than the dings in the external finish). IF you own machine tools or have access to a machine shop.......and know how to run machine tools, I am sure you could easily duplicate their design almost certainly for less than $250. Especially if you arn't counting the cost of the machines and labor costs. Which a commercial business CANT do: they have to pay for the building, equipment, materials, labor, marketing, R&D................. and still make enough profit to make the business worth their time and effort. They are not making these things for fun, they are trying to make a living at this. And I am fairly sure that currently, there simply isn't enough volume of sales to sell them for much less than they are already. However, if I am buying a centerfire rifle suppressor, I think there is a lot more going on.......as others have pointed out. I don't want something made out of aluminum........I want much better materials to be used. Stuff the typical hobbiest/home gunsmith isn't going to probably use. Stuff that costs significantly more than aluminum and is harder to machine. There is a tremendous amount of blast and pressure in a centerfire rifle suppressor. I also want the quick detach features. I don't want a lot of zero shift and I want the zero shift to be repeatable and all that. Long story even longer: I pay a LOT more for a centerfire rifle suppressor and feel it is worth it.
__________________
You know the rest. In the books you have read How the British Regulars fired and fled, How the farmers gave them ball for ball, From behind each fence and farmyard wall, Chasing the redcoats down the lane, Then crossing the fields to emerge again Under the trees at the turn of the road, And only pausing to fire and load. Last edited by 444; October 23, 2017 at 10:21 AM. |
October 23, 2017, 10:17 AM | #7 |
Senior Member
Join Date: October 15, 1998
Location: Sherman, TX USA
Posts: 3,750
|
There is significant margin in most silencers.
One reason is the time it can take to get the cash flowing. In my area, since 41F changed things, the silencer market is very slow. A dealer may have their cash tied up in them for much longer than normal , compared with the other stock in their store.
__________________
Make mine lean, mean, and 9x19! |
October 23, 2017, 01:51 PM | #8 |
member
Join Date: June 12, 2000
Location: Texas and Oklahoma area
Posts: 8,462
|
My experience with Form 1 brake plug suppressors has been that for $60 in parts, the rimfire suppressors are longer and heavier; but just as quiet. The centerfire rifle DIY suppressors are longer, heavier, and noticeably less quiet, as well as not suited to a heavy firing schedule; but they are cheaper the tax in materials cost and not especially labor intensive.
|
October 23, 2017, 02:04 PM | #9 |
Senior Member
Join Date: October 25, 2001
Location: Alabama
Posts: 18,492
|
The $200 transfer tax was intended to make Bad Guns and Stuff prohibitively expensive, since the antis of the era realized a total ban would not pass court tests of constitutionality.
That's an 80% tax on a $250 Thompson. How much did a silencer cost in 1933? As much as $10? 2000% tax. Put $200 in 1934 dollars in a COLA inflation calculator and get $3753 in 2017 dollars. How many suppressors could you sell if they had indexed the tax? |
October 23, 2017, 02:27 PM | #10 |
Junior member
Join Date: January 18, 2010
Location: Lampasas Texas
Posts: 154
|
As I ponder this issue a lot ---from several of the opinions here.. I had totally forgot about product liability a problem I am keenly familiar with from my working life...so there is one inflation driver
The above thoughts on the cost of the NAF license s product cost----is another driver of cost...$200 bucks for a $89 muffler is bound to slow sales I guess my initial though was the product seems to be a no brainier desire and useful item...that is generally easy to produce to good effect... There will always be "mine is the best " because of the tech or materials---- but in the end there rationally should be a larger supply of these...especially from the direct weapon MFG competing against the boutique versions... maybe I am naive but I am not seeing much more than the few boutique offerings.... In contrast, many of the major weapon MFG have some version of a very good trigger...and then the boutique guys with a better mouse trap... some relatively expensive, but most, NOT outrageously priced and some times the trigger from the MFG is very damned good as delivered...not needing the better mouse trap My knee jerk rant is entirely on the extreme prices of some of these cans.... relative to the parts count, materiel, tech, and effectivenss So yes it a complicated evaluation with a lot of different market variables....some few I had not initially pondered BTW watching U-tube videos on construction, tech, and effectiveness is very illuminating |
October 23, 2017, 02:39 PM | #11 | |
Senior Member
Join Date: December 13, 2005
Posts: 4,439
|
Quote:
I think the tax stamp also distorts the market by screening out people like me, people who might try a suppressor on a 22lr for $50. I am also taken aback by the price on many suppressors, but it helps to remember that the stamp and the delay make them difficult to replace, so the may be built to otherwsie unnecessary levels durability.
__________________
http://www.npboards.com/index.php |
|
October 23, 2017, 04:43 PM | #12 |
Senior Member
Join Date: October 25, 2001
Location: Alabama
Posts: 18,492
|
I believe the market is fairly inelastic on price.
I bet sales would increase a lot if the feds left the $200 tax in place but cut out the months of bureaucratic paperwhipping. Same NICS as a pistol, pay for your stamp, and out the door in not over a week. |
October 24, 2017, 12:20 AM | #13 |
Member
Join Date: June 2, 2016
Location: Pennsylvania
Posts: 77
|
To the OP, I say:
You sir...might not be looking hard enough! http://www.recoilweb.com/four-silenc...ks-109410.html That .30 cal suppressor, fitted with an additional 5.56 end cap is calling my name... I do think we are about to witness an even greater sense of competition in the market, with lower prices. Funny how if you look up reviews on those models in the link above, testers and reviewers typically say things along the lines of "does the same thing as a can costing twice as much", etc. I tend to be one of those dudes who would love to spend $3000 on an AR build, but doesn't nearly have the means to do so. |
October 24, 2017, 07:06 AM | #14 |
Junior member
Join Date: February 2, 2010
Posts: 6,846
|
I'll admit it's hard to justify a $200 stamp on a gamble that you can make something that works as well as the piece made by a company whose R&D costs thousands of dollars in time and material for failures.
I have a pair of Form 1 22lr cans that are "adequate" for my purposes. For the most part, my design is entirely my own although I've seen others that look similar. Mine are made using common materials that cost less than $50 when purchased. Would I try this on a center fire? Only in a dire emergency due to questionable strength of the finished product. I respect the time and effort invested by the name brand suppressor makers as every one should. They use specific materials and design parameters ensuring safe products. I'm not saying there isn't a high level of profit in some of the cans but the effective ones take a lot of thought and simple trial and error. I was told by a local dealer "NFA items are expensive simply because they CAN BE. If you can't or don't want to spend the big bucks, don't bother looking". I walked out on the rest of his spiel. I believe there is some of this attitude at all levels of the NFA market but it's not significantly different in the vintage/classic car market or most other "hard to get" market. "We've got it, you want it-pay or walk". |
October 24, 2017, 09:27 AM | #15 |
Senior Member
Join Date: November 4, 2013
Location: Western slope of Colorado
Posts: 3,678
|
Lots of cheap (~$100) suppressors in other countries. Countries without the NFA restrictions and taxation.
Heck ive seen disposable 22lr cans. Shoot 100rounds and throw it away. |
October 25, 2017, 03:04 PM | #16 | ||||
Senior Member
Join Date: October 23, 2005
Location: US
Posts: 3,649
|
Quote:
Quote:
Quote:
Quote:
Last edited by 5whiskey; October 25, 2017 at 03:14 PM. |
||||
October 25, 2017, 08:28 PM | #17 |
Senior Member
Join Date: February 24, 2010
Posts: 498
|
Let's say you are a one-man silencer company, and you are willing to work 260 days a year. Let's also say that if you don't clear $50K in a year you will change to a product that will generate that kind of income. You would have to bring in $192/day clear. Add taxes, shop rent, material, supplies, health insurance, machine amortization and let's say that amount doubles. That's probably way too low, but let's just say it for sake of argument.
And let's say that since you are a one man shop it takes you all day to turn all the baffles, turn and thread the tube, thread the mount, finish, test fire, etc. So you have to squeeze $400 in wholesale out of each and every silencer you make just to keep your doors open. If you charged less you simply couldn't make enough to stay in the business. You could earn more working for the water utility. You simply can't sell enough silencers to operate as a volume business. The market isn't there. |
October 25, 2017, 09:07 PM | #18 |
Junior member
Join Date: February 2, 2010
Posts: 6,846
|
"And let's say that since you are a one man shop it takes you all day to turn all the baffles, turn and thread the tube, thread the mount, finish, test fire, etc. So you have to squeeze $400 in wholesale out of each and every silencer you make just to keep your doors open."
On the other hand, before the BATFE got all crabby, "solvent traps" were selling for $25-40 and the most basic baffle stacks can be made for under $25. If those folks selling the solvent traps were making lunch money, your "one man shop" scenario could easily produce 4 suppressors per day @ $100 each and hit that $192 figure with coffee money to spare. |
Thread Tools | Search this Thread |
|
|