June 22, 2018, 04:24 PM | #1 |
Senior Member
Join Date: December 14, 2009
Posts: 219
|
New 1955 870 Wingmaster
Pre-Freedom Group (ha ha) Remington 870 Wingmaster AP manufactured in Nov 1955. Picked it up from the original owner who bought it new and shot around 10 rounds through it and back into the safe it went.
After cleaning, oiling, and waxing: Original manual also in the box: Last edited by KnightofCydonia; June 23, 2018 at 11:39 AM. |
June 22, 2018, 04:56 PM | #2 |
Senior Member
Join Date: February 28, 2008
Location: Michigan
Posts: 2,618
|
And how much did you pay the guy for it?
The Original purchase price? |
June 23, 2018, 01:13 PM | #3 |
Senior Member
Join Date: May 17, 2007
Posts: 442
|
Much better pictures.Gorgeous shotgun! Looks like it just came from the factory.
|
June 23, 2018, 01:27 PM | #4 |
Senior Member
Join Date: December 14, 2009
Posts: 219
|
Thanks! There was only 1 plastic part on it, the buttplate. I have swapped out the factory magazine follower with a hi-viz green follower just for safety. So I guess that makes 2 plastic parts!
One thing I've noticed is that the chamber on the old barrel is much tighter than in modern 870s and other shotguns like my Benelli Nova. I normally use fired shells with the crimp cut off as snap caps, and in this 870, only Federal shells will slip in. Remington, Kent, and Winchester will not fit easily or at all. Just an interesting observation on chamber tolerances then and now. In some twisted form of logic, I get "sticky chamber" with these 870s, but in a good way hah |
June 23, 2018, 03:26 PM | #5 |
Senior Member
Join Date: February 11, 2011
Location: So-Cal
Posts: 786
|
That is a really nice find. A '55, nice. I have a '75 Wingmaster[20ga], no vented rib on mine either. Wonder when Rem started putting those on the WM's.
|
June 23, 2018, 03:26 PM | #6 |
Senior Member
Join Date: October 9, 2009
Location: North Alabama
Posts: 8,273
|
blast from the past
The way it used to be. Very nice indeed. That is the first 50's era box I have ever seen.
Looks like a 28", plain barrel, no doubt 2-3/4" chamber.....what choke? |
June 23, 2018, 03:30 PM | #7 |
Senior Member
Join Date: December 14, 2009
Posts: 219
|
It's marked 28" on the box but crossed out with 30" in handwriting, and I think it's actually 30". Full choke.
Accordingly 26" was IC, 28" was Mod, 30" was Full based on my research of the early barrels. |
June 23, 2018, 05:30 PM | #8 |
Senior Member
Join Date: October 21, 2009
Location: Quadling Country
Posts: 2,780
|
I have that same gun except....
Somebody used it for decades, beat it all to hell and back, dinged up the stock, cut the barrel down by hand to 18.5" and got it all rusty outside, never replaced the front sight, removed the magazine blocker and lost it and wore the finish off the receiver. On it I put a new finish, sight post and buffed out and then polished the stock. Runs like a top after all these years.
__________________
Thus a man should endeavor to reach this high place of courage with all his heart, and, so trying, never be backward in war. |
June 23, 2018, 07:31 PM | #9 |
Senior Member
Join Date: March 20, 2000
Location: Massachusetts
Posts: 287
|
Beautiful shotgun. Love the forearm.
Nice score. |
June 24, 2018, 11:33 AM | #10 | |
Senior Member
Join Date: February 16, 2006
Location: IOWA
Posts: 8,783
|
Great find
Quote:
Be Safe !!!
__________________
'Fundamental truths' are easy to recognize because they are verified daily through simple observation and thus, require no testing. |
|
June 24, 2018, 01:04 PM | #11 |
Senior Member
Join Date: December 14, 2009
Posts: 219
|
I feel terrible planning to shoot and hunt with this eventually. It's in such mint shape. But there are 11 million out there, and I want to use this for upland, deer, and turkey.
|
June 24, 2018, 02:02 PM | #12 |
Senior Member
Join Date: July 7, 2008
Location: Upper midwest
Posts: 5,631
|
Yes, use it and enjoy it. I'd probably keep it out of the duck blind, but other than that...
__________________
Never let anything mechanical know you're in a hurry. |
June 24, 2018, 02:14 PM | #13 |
Senior Member
Join Date: December 14, 2009
Posts: 219
|
I have a modern, plastic, and fantastic Benelli Nova for bad weather duck blind days.
|
June 24, 2018, 05:01 PM | #14 |
Senior Member
Join Date: February 11, 2011
Location: So-Cal
Posts: 786
|
Correct. My '75 I mentioned earlier came with a 28" Mod., and a 26" Imp/Cyl. No ribs on either. Clean as a whistle.
|
June 24, 2018, 06:42 PM | #15 |
Senior Member
Join Date: October 9, 2009
Location: North Alabama
Posts: 8,273
|
barrel length = choke
I never paid attention to Remingtons regards barrel length and choke on the fixed, plain barrels. Just assumed if one wanted a 28" full, choke, it could be had.
In 1981 I paid a premium to get a 3" chambered, vent rib, FULL choke barrel (only). They were new and very hard to come by in my neck of the woods. As soon as it came in, I traded the 30" vent number that came on the gun away, way to long for my purposes (gobbler hunting). I matched that 26" full, with a 26" IC, and hopped the IC barrel up to modified like performance by shooting 1-1/2 oz short mags from it (you could still shoot lead at ducks in some areas those days) and it worked great for mallards over decoys on small water. In fact, I shot the IC barrel at everything except gobblers and never felt underchoked (is that a term?). BAck on track, that is grand old shotgun. Note in the pics a machined extractor and not a MIM part. |
July 1, 2018, 09:10 AM | #16 |
Senior Member
Join Date: November 19, 2001
Location: N.E. OH
Posts: 385
|
I have a 1968 in identical shape, actually still had original factory preservative. Came with a 30" non rib Full. I put a 20" rifle sight barrel on it, ran some slugs and buckshot and she shoots wonderful.
I'm torn to beat it around in the brush or let it go. P1000173 by |
July 1, 2018, 09:27 AM | #17 |
Senior Member
Join Date: April 12, 2010
Location: Lake Martin, AL
Posts: 3,311
|
Like going back in time. It is a beauty and oh so precious.
I have two wingmasters. One is a standard from September 1951. It was a police trade in from the Tallassee, Alabama Police Department. The second is a 870 TB from the Ruleville, Mississippi Police Department. It was an ugly duckling until I cleaned it up. The wood is amazingly figured and beautiful. It is was manufactured May 1976. The action is so smooth on both these fine old guns. |
July 1, 2018, 02:01 PM | #18 |
Member
Join Date: June 27, 2018
Location: Mount Sterling Kentucky
Posts: 44
|
That was a really great find. Classic
|
Thread Tools | Search this Thread |
|
|