May 1, 2013, 08:38 PM | #1 |
Senior Member
Join Date: April 4, 2012
Location: South Jersey
Posts: 2,217
|
Tell me about Korth
I have seen a few listed recently. They are priced at the very high end of the scale. Are they an aftermarket tuned or custom built revolver? Are they worth the money?
__________________
Concentrated power is not rendered harmless by the good intentions of those who create it. Milton Freidman "If you find yourself in a fair fight,,, Your tactics suck"- Unknown |
May 1, 2013, 08:47 PM | #2 |
Senior Member
Join Date: October 25, 2001
Location: Alabama
Posts: 18,541
|
German made, all their own thing, not based on any ordinary brand.
Very high quality, very expensive, very scarce. Worth the money? Sure, if you want to spend it. |
May 1, 2013, 08:52 PM | #3 |
Senior Member
Join Date: November 2, 2005
Location: Arizona
Posts: 1,936
|
Yes, they are high end custom built, almost all by hand, parts are hand fitted. The guns are built on a limited basis. Are they worth it, don't know, I guess if you can afford them they are worth it. I have had the opportunity to handle one and work the action, the revolver was smooth as silk and seem to be part of my hand. Korth has been building his firearms since 1982, the best way to learn about them is to google Korth firearms. The only ones that seem to bad mouth the guns are those who can't afford them, me, I'm just envious as h e double tooth picks
__________________
Ron James |
May 1, 2013, 09:06 PM | #4 | |
Senior Member
Join Date: February 17, 2013
Location: Louisville, KY, USA
Posts: 273
|
Quote:
They're said to be masterpieces of their kind mechanically, like Purdey shotguns only less expensive. Sure, it would be nice to own one, but that will never be anything but a dream. Fortunately I'm happy with my own Smith revolvers, and they shoot better than I can.
__________________
"Don't let macho be your epitaph." ---Ed Lovette |
|
May 1, 2013, 09:09 PM | #5 |
Senior Member
Join Date: April 4, 2012
Location: South Jersey
Posts: 2,217
|
Thanks for the info. I was doing a little research about them as I dream and aspire to delusions of grandeur. I guess Korth is kinda the H&H of handguns.
__________________
Concentrated power is not rendered harmless by the good intentions of those who create it. Milton Freidman "If you find yourself in a fair fight,,, Your tactics suck"- Unknown |
May 1, 2013, 09:18 PM | #6 |
Senior Member
Join Date: May 27, 2009
Posts: 3,968
|
I have handled one. Extremely smooth and well crafted. I don't think it would hold up to a lot of abuse like a Combat Masterpiece or even a Colt Python (which while super smooth not known for durability.)
__________________
Sic Semper Tyrannis |
May 1, 2013, 09:18 PM | #7 |
Senior Member
Join Date: November 30, 2010
Posts: 3,513
|
From a collectors standpoint if you have the cash its worth it. From a functioning standpoint a S&W revolver worked on by a quality gunsmith will perform just as well for a fraction of a price. I would rather drop that kind of money on an entirely handmade Arrieta shotgun, at least with the Arrieta you get custom engraving and some of the nicest wood furniture you will see on any gun.
I know this is the revolver forum but if you are interested in Arrieta shotguns this video does them a great justice, an absolute work of art, literally. https://www.youtube.com/watch?v=J5HoKCDwmD8 . Last edited by Dragline45; May 1, 2013 at 09:37 PM. |
May 1, 2013, 09:27 PM | #8 |
Senior Member
Join Date: May 27, 2009
Posts: 3,968
|
That is a very good way of explaining it.
__________________
Sic Semper Tyrannis |
May 1, 2013, 09:39 PM | #9 |
Senior Member
Join Date: April 13, 2013
Location: N. Georgia
Posts: 1,150
|
Bill Jordan, famed Border Patrol agent and later gun writer who talked Smith into producing the Model 19, handled a Korth and liked it but not enough to
believe it was worth the money over the Smith. I know one thing about them and that's the trigger return block, which in a Smith runs on the frame of the revolver, is mounted on tiny ball bearings which give it at least in part its silky smooth trigger in double or single action. |
May 2, 2013, 05:41 AM | #10 |
Senior Member
Join Date: August 14, 2001
Posts: 1,260
|
I have a rimfire Korth revolver that was built in 1969, still under the original owner. He made sure that the quality was excellent or better. I have had the priviledge to visit their old shop in Ratzeburg before it closed in 2008 and got a tour of the shop by their master gunsmith.
I have a few friends in Germany that have shot their .357 Mag Korth revolvers - the newer models - with the barrel sleeve, extensively and they hold up very well, much better than the Python. The action of my 1974 Python is nowhere close to what the action of the Korth is. The trigger is on a roller bearing. I shoot my rimfire Korth a lot and it is unbelievable how reliable the ignition is with such a light mainspring. Is it more accurate than my 1954 S&W K22? Maybe not but the trigger pull will help it to shoot more consistently. There are few revolvers of that quality, Freedom Arms and the Manurhin MR73 are the only ones that can hold a candle to a Korth. |
May 4, 2013, 01:28 AM | #11 |
Junior member
Join Date: May 1, 2010
Posts: 5,797
|
Right up there with a Swiss Mini-Gun...
I like Korths, never shot any but I could see a market for them with the same crowd that buys H&H shotguns, Rolls-Royces & those fancy cheeses in the supermarket.
They could also get a slick Swiss Mini Gun too. ClydeFrog |
May 4, 2013, 01:50 AM | #12 | |
Staff
Join Date: February 12, 2001
Location: DFW Area
Posts: 24,989
|
Quote:
__________________
Do you know about the TEXAS State Rifle Association?
|
|
May 4, 2013, 09:27 AM | #13 | |
Senior Member
Join Date: February 2, 2008
Posts: 1,107
|
Quote:
Fine doesn't necessarily mean weak. |
|
May 4, 2013, 09:51 AM | #14 |
Senior Member
Join Date: February 2, 2008
Posts: 1,107
|
|
May 4, 2013, 09:55 AM | #15 |
Senior Member
Join Date: February 2, 2008
Posts: 1,107
|
|
May 5, 2013, 02:06 AM | #16 |
Senior Member
Join Date: August 14, 2001
Posts: 1,260
|
Brian,
a Manurhin MR73 with a six inch barrel is what I am saving for. Just got the funds depleted by getting yet another S/42 P.08. |
May 5, 2013, 04:59 AM | #17 |
Senior Member
Join Date: November 6, 2011
Location: Burien,WA
Posts: 897
|
bac1023:
i asked this in another thread, but how accurate is the Korth P122 9mm?
__________________
Rugers:SR1911 CMD,MK 3 .22lr 6",Sec. Six '76 liberty .357 4",SRH .480 Ruger 7.5",Mini-14 188 5.56/.233 18.5", Marlins: 795 .22lr 16.5",30aw 30-30 20",Mossberg:Mav. 88 Tact. 12 ga, 18.5",ATR 100 .270 Win. 22",S&W:SW9VE 9mm 4",Springfield:XD .357sig 4", AKs:CAI PSL-54C, WASR 10/63, WW74,SLR-106c |
May 5, 2013, 07:25 AM | #18 | |
Senior Member
Join Date: February 2, 2008
Posts: 1,107
|
Quote:
|
|
May 5, 2013, 07:27 AM | #19 | |
Senior Member
Join Date: February 2, 2008
Posts: 1,107
|
Quote:
Its more of a collector's piece and they are very well crafted. |
|
May 5, 2013, 07:33 AM | #20 |
Senior Member
Join Date: November 6, 2011
Location: Burien,WA
Posts: 897
|
bac1023:
thanks for the info on Korth p 122 9mm, it's just i would think that a $12k handmade semi-auto would be a literal tack driver, albeit that has more to with the skill of the individual using it.
__________________
Rugers:SR1911 CMD,MK 3 .22lr 6",Sec. Six '76 liberty .357 4",SRH .480 Ruger 7.5",Mini-14 188 5.56/.233 18.5", Marlins: 795 .22lr 16.5",30aw 30-30 20",Mossberg:Mav. 88 Tact. 12 ga, 18.5",ATR 100 .270 Win. 22",S&W:SW9VE 9mm 4",Springfield:XD .357sig 4", AKs:CAI PSL-54C, WASR 10/63, WW74,SLR-106c |
May 5, 2013, 09:07 AM | #21 | |
Senior Member
Join Date: February 2, 2008
Posts: 1,107
|
Tell me about Korth
Quote:
P122 is the serial number, not the model number. It's simply called the Korth Autopistol. It wasn't really designed as a target gun. They range from $10-$12k brand new, as Korth USA still has some in stock. I didn't pay that much. They haven't built any in Germany in over 10 years, so those have been there a while. |
|
May 18, 2013, 12:11 AM | #22 |
Member
Join Date: April 23, 2013
Posts: 68
|
I was at a shot show in Vegas about 5 years ago, there was some hi-end company had a four double barrel over/under package one of .410g, 20g, 12g. and ???
$440,000 If you need your calc's, that's $110,000 each gun! Hello Prince Charls'd (by the way, the most awesome Glock on my part is coming soon.) |
May 20, 2013, 11:03 AM | #23 | |
Senior Member
Join Date: August 14, 2001
Posts: 1,260
|
Quote:
|
|
May 20, 2013, 11:27 AM | #24 |
Junior member
Join Date: February 23, 2012
Posts: 921
|
I am sure they are very finely made revolvers of the highest quality. I find them to be the equivalent to fine British game guns in price only. For aesthetically, they are severely lacking. All German engineering and sterility, lacking the graceful elegance of a fine old S&W N-frame or Colt. No comparison to a fine Purdey or H&H double. I have no doubt that they're better, I just don't think it would be worth it to me.
I don't have a problem paying $5000 for a single firearm, it just won't be that one. You don't need a Rolls-Royce and money laying around with nowhere to throw it, just a burning passion to have something truly fine in your life. I was making about $40,000/yr when I bought a $4000 Merkel double. It was important to me, so I made it happen and I have never regretted it. I make a lot more than that now but just as it took me a while to pay off that Merkel, I've done without a lot of things and waited several years before having a custom .500 Ruger Bisley built. Some things are worth saving your money and waiting for. Don't assume that everyone who spends that kind of coin on a firearm is stupid rich and bored, wondering where to get the next $10,000 toy. |
May 20, 2013, 11:28 AM | #25 |
Junior member
Join Date: December 20, 2012
Location: The "Gunshine State"
Posts: 1,981
|
The 4 O/U field set is from Perazzi - 12, 20, 28 and 410 - in their SCO or higher grade - it is on display at every SHOT show. Great shotguns, built to go the distance, Perazzis win the majority of Olympics medals. That's enough side step here in the handgun section
|
|
|