|
July 26, 2017, 07:21 PM
|
#1 |
|
Member
Join Date: April 4, 2006
Posts: 43
|
Load Data Program help
I was wondering if there was anyone with a load program that could run a load for me
300 Savage 130 grn. Barnes TTSX 42 grns H4895 CCI primer 2.60 OAL Thank you very much |
|
|
July 26, 2017, 08:08 PM
|
#2 |
|
Senior Member
Join Date: March 21, 2013
Location: Idaho
Posts: 5,523
|
QL gave me a max pressure of 52,745 psi; which is like 99% of spec max. Occurred at 300ms. Muzzle velocity 2809 f/s with a 20" bbl; 2921 w/ 24".
It also shows the "Shot Start [Initiation] Pressure" at 5076, and it's in RED. I'm not sure what that is or how significant it is. That's an Unclenick question.
__________________
Gun control laws benefit only criminals and politicians - but then, I repeat myself. Life Member, National Rifle Association |
|
|
|
July 26, 2017, 08:24 PM
|
#3 |
|
Junior Member
Join Date: April 2, 2017
Posts: 12
|
Need bullet diameter and barrel length, with 308,130 barnes TTSX BTW 30364 the start (Initiation) Pressure is way to high. I have never done rifle data just going by quick load.
Sent from my SM-T800 using Tapatalk |
|
|
|
July 27, 2017, 03:30 PM
|
#4 |
|
Member
Join Date: April 4, 2006
Posts: 43
|
Thanks for the answers .Barrel length is 23 inches and bullet diameter is .308---Thank you
|
|
|
 |
|
|
