|
Forum Rules | Firearms Safety | Firearms Photos | Links | Library | Lost Password | Email Changes |
Register | FAQ | Calendar | Today's Posts | Search |
|
Thread Tools | Search this Thread |
April 15, 2013, 12:43 PM | #1 |
Senior Member
Join Date: October 4, 2008
Location: WI
Posts: 3,656
|
Father found some replica BP revolvers.
Hello,
I have a question for you all. Years ago my parents house was partially destroyed by a tornado. So every so often we discover things that have been put somewhere strange from that time. Usually to keep them from water damage since the majority of the house lacked a roof. Well. My Father apparently had three Replica BP Revolvers that were made in italy that were tossed in a rucksack and sadly forgotten about since then. Pretty amazing since we found them this weekend in the boxes and in shockingly great shape considering. They had most of the packing grease still on them. From what I can see they were imported by SILE Distributors Inc. out of N.Y. They are .44 New Model Army, .44 Model 1860 Army, and the last one is similar to the 1860 but the frame is brass and it lacks the smooth edges on the barrel more squared off look. (I'll have to look it up I know I've seen it before but the name escapes me) So while the blued metal is in pretty much flawless condition the brass has seemed to tarnish over the years much like a penny does. He is interested in cleaning up the brass parts and learning a bit more about them. He doesn't believe they have any collector value so cleaning them up shouldn't be an issue. If you guys disagree or have any recommendations on what to clean them with please let me know. I'll get some crappy cell phone pics uploaded when I have a few min to take them.
__________________
E-Shock rounds are engineered to expend maximum energy into soft targets, turning the density mass into an expanding rotational cone of NyTrilium matrix particles, causing neurological collapse to the central nervous system.- Yeah I can do that. I guarantee you will know it if a bicyclist hits your house going 1000 mph. -Smaug |
April 15, 2013, 01:55 PM | #2 |
Senior Member
Join Date: October 8, 2006
Location: Northern Michigan
Posts: 2,772
|
I agree with cleaning them up. They have no collector value so there is no issue with cleaning or shooting them.
Any good commercial brass polish will serve. |
April 15, 2013, 01:56 PM | #3 |
Senior Member
Join Date: October 24, 2008
Location: Naples, Fl
Posts: 5,440
|
Sile was an importer who handled a pretty high quality product
I have an 1860 (steel) similar to yours and a NMA similar to yours.
On your steel 1860, you will find a DDG arranged in a triangle. This mark will also be found on the bottom flat of the barrel under the loading lever of the NMA. It means the pistols were manufactured by Armi San Paolo which at that time produced some of the best replicas available. Nice finish, very tight fit. Just a good quality weapon. I don't know anything about the brass frame but I would be intersted in knowing if the DDG emblem is to be found in the same place on that revolver as it is on the steel frame version. As regards collector value, you will find a slightly elevated value because they are ASP rather than some smaller and less serious manufacturer contemporary to those revolvers. The value might also be slightly higher since they were important by Sile which was not responsible for a great volume of imported replicas, so they are a bit rarer than pistols from ASM etc. Mine are dated with the code "AE" which means they are made in 1979. They are every bit as good as Pietta revolvers. I gave 150.00 a piece for them at a gun show about 18 months ago. They are "as new"
__________________
Seek truth. Relax. Take a breath. |
April 15, 2013, 01:57 PM | #4 |
Senior Member
Join Date: October 24, 2008
Location: Naples, Fl
Posts: 5,440
|
Oooops!
Yes... What Mykeal said about cleaning them up.
__________________
Seek truth. Relax. Take a breath. |
April 15, 2013, 02:53 PM | #5 |
Senior Member
Join Date: September 7, 2012
Location: Crockett, Texas
Posts: 363
|
the one with the brass frame and the "squared off" looking barrel is a brass frame 1851 Navy style gun. If it is .36 cal, you could say it was a Schneider & Glassick replica, but it most likely is a .44. Cabela's sells ones like it now that they call "Reb Navys" I would use some brasso and elbow grease. They are worth no more or less than similar used replicas fetch on gunbroker, comparing to the condition of the gun. If they still have a good bore, they would prolly make great shooters. If not, they still will be nice as display pieces.
__________________
"I'm your huckleberry, it's just my game" |
April 15, 2013, 03:05 PM | #6 |
Member In Memoriam
Join Date: March 17, 1999
Posts: 24,383
|
Most of those brass frame replicas were sold as "Confederate" but only a few were actually made as copies of brass-frame Civil War revolvers.*
Brass frames and trigger guards clean up well with ordinary brass or silver polish or polishing cloths. *Some Confederate makers used brass since they did not have the industrial establishments of the northern makers, and brass was easier to make by casting and easier to machine. With black powder, brass (or bronze) is fairly durable and able to stand up to a reasonable amount of shooting. Jim |
April 15, 2013, 03:12 PM | #7 |
Senior Member
Join Date: December 2, 2012
Posts: 190
|
Is the New Model Army a Remington styled pistol or Colt? Reason I ask is it could be a Belgian Centaure if Colt style. Sile did import some of those in the sixties and they do have substantial collector value.
|
April 15, 2013, 04:14 PM | #8 |
Senior Member
Join Date: October 4, 2008
Location: WI
Posts: 3,656
|
Looks like pictures are in order!
__________________
E-Shock rounds are engineered to expend maximum energy into soft targets, turning the density mass into an expanding rotational cone of NyTrilium matrix particles, causing neurological collapse to the central nervous system.- Yeah I can do that. I guarantee you will know it if a bicyclist hits your house going 1000 mph. -Smaug |
April 15, 2013, 06:39 PM | #9 |
Senior Member
Join Date: August 31, 2009
Location: Arizona
Posts: 171
|
I would not polish the brass. You would be removing the patina.But each to his own.
|
April 15, 2013, 07:05 PM | #10 |
Senior Member
Join Date: October 4, 2008
Location: WI
Posts: 3,656
|
Then here are the stamps on the frame
__________________
E-Shock rounds are engineered to expend maximum energy into soft targets, turning the density mass into an expanding rotational cone of NyTrilium matrix particles, causing neurological collapse to the central nervous system.- Yeah I can do that. I guarantee you will know it if a bicyclist hits your house going 1000 mph. -Smaug |
April 16, 2013, 05:12 AM | #11 |
Senior Member
Join Date: October 24, 2008
Location: Naples, Fl
Posts: 5,440
|
Yep....Three good pistols
I'd clean them up.
Were you able to find the Armi San Paolo marking on the brass frame revolver? And Can you confirm that it is marked from Sile as are the other two revolvers?
__________________
Seek truth. Relax. Take a breath. |
April 16, 2013, 05:18 AM | #12 |
Senior Member
Join Date: September 8, 2007
Location: Mississippi
Posts: 16,190
|
The brass frame has an AB date code which means it was made in 76. It has a round barrel which would make it a Griswold & Gunnison if it was a .36 but its a .44
|
April 16, 2013, 05:56 AM | #13 |
Senior Member
Join Date: December 19, 2012
Location: Treasure Coast, Florida
Posts: 335
|
The G&G looks like an ASM, Armi San Marco. All will be a hoot to shoot, enjoy!
|
April 16, 2013, 06:58 AM | #14 |
Senior Member
Join Date: September 7, 2012
Location: Crockett, Texas
Posts: 363
|
yup, I have a Griswold .36 presently tore down for refurb and refinishing. A .44 Griswold would be fun to shoot, not historically accurate, but I just like the extra "oomph" a .44 brings to the table.
__________________
"I'm your huckleberry, it's just my game" |
April 16, 2013, 10:09 AM | #15 |
Senior Member
Join Date: January 8, 2013
Location: Washington State
Posts: 246
|
Flitz works really well for polishing up the brass. It also removes surface rust well too on blued parts. Bluing will polish up with the flitz too. To maintain the polish on the brass parts you can follow up the polish with some Duracoat clear, this will seal it and prevent further tarnishing. Unless you want the antique look.
Last edited by blfuller; April 17, 2013 at 07:41 AM. |
April 16, 2013, 10:43 AM | #16 |
Senior Member
Join Date: December 2, 2012
Posts: 190
|
I'd just clean them,
I wouldn't work at removing the patina from the brass parts unless you were attempting to make them look like new for resale or some such thing. I think patina looks good on those old guns.
|
April 16, 2013, 10:49 PM | #17 |
Senior Member
Join Date: September 21, 2012
Posts: 144
|
Nice Find!
First one, 1858 Remington NMA appears to be a Lyman/Army San Paolo by the shape of the loading lever. Second is a four-screw 1860 Army; could be of varying make Again, looks ASP to me. Third one appears to be a "Reb Navy" type, Sile imported a bunch of different manufacturers over the years. This is a Griswold & Gunnison replica in .44; not historically accurate but cool nonetheless.
Flitz will clean the brass in a matter of minutes. Shoot 'em.
__________________
"You gonna pull those pistols, or whistle Dixie?" |
April 16, 2013, 10:53 PM | #18 |
Staff
Join Date: November 2, 1998
Location: Colorado
Posts: 21,841
|
Gun in the center is a replica of a Colt and it takes a shoulder stock.
__________________
Vigilantibus et non dormientibus jura subveniunt. Molon Labe! |
April 17, 2013, 01:55 AM | #19 |
Senior Member
Join Date: October 24, 2008
Location: Naples, Fl
Posts: 5,440
|
Venom....
....Were you able to locate the ASP logo on the two steel frame revolvers?
I agree with others that the brass frame revolver looks like an alternate manufacturer from ASP. I disagree with others (but it is only my opinion) about cleaning up the brass. I think that I would not even try to cycle the brass frame revolver until I had cleaned up the brass pretty well. Maybe it does not need to shine like a ruby in a goat's a __ __ but that green muck needs to be cleaned up. Just my opinion.
__________________
Seek truth. Relax. Take a breath. |
April 17, 2013, 05:03 AM | #20 | |
Senior Member
Join Date: September 8, 2007
Location: Mississippi
Posts: 16,190
|
Quote:
|
|
April 21, 2013, 01:09 PM | #21 |
Senior Member
Join Date: October 4, 2008
Location: WI
Posts: 3,656
|
Well they are cleaning up pretty well! I have the New Army mostly apart and removing the tar thats in it. sucks that the action is all gummed up from this stuff but at the same time it kept it looking new all these years...
Can someone post instructions how to take down the other 2?
__________________
E-Shock rounds are engineered to expend maximum energy into soft targets, turning the density mass into an expanding rotational cone of NyTrilium matrix particles, causing neurological collapse to the central nervous system.- Yeah I can do that. I guarantee you will know it if a bicyclist hits your house going 1000 mph. -Smaug |
April 21, 2013, 01:20 PM | #22 |
Member
Join Date: July 6, 2012
Posts: 50
|
Taking them down is pretty easy. I have absolutely NO technical skills whatsoever and still managed it fine.
http://www.youtube.com/watch?feature...&v=jBSCPVRNaGg |
April 21, 2013, 01:45 PM | #23 |
Senior Member
Join Date: October 4, 2008
Location: WI
Posts: 3,656
|
I cant seem to get the wedge out... the grease has turned to a really think sticky tar. So everythings like a huge pain in the butt to move.
__________________
E-Shock rounds are engineered to expend maximum energy into soft targets, turning the density mass into an expanding rotational cone of NyTrilium matrix particles, causing neurological collapse to the central nervous system.- Yeah I can do that. I guarantee you will know it if a bicyclist hits your house going 1000 mph. -Smaug |
April 21, 2013, 07:03 PM | #24 |
Senior Member
Join Date: October 24, 2008
Location: Naples, Fl
Posts: 5,440
|
Don't do it until you get confirmation from someone else who knows better....
...But ain't this where half and half Automatic Transmission Fluid and Acetone comes in handy?
__________________
Seek truth. Relax. Take a breath. |
April 21, 2013, 07:12 PM | #25 |
Senior Member
Join Date: November 25, 2012
Location: Eaton Rapids, MI
Posts: 445
|
Good call Doc...
... that's what I'd do.
Birch
__________________
Black Powder: Not because it is easy, but because it is hard, because that goal will serve to organize and measure the best of our energies and skills, because that challenge is one that we are willing to accept, one we are unwilling to postpone, and one which we intend to win... |
|
|