The Firing Line Forums

Go Back   The Firing Line Forums > Hogan's Alley > Handguns: The Revolver Forum

Reply
 
Thread Tools Search this Thread
Old August 31, 2012, 05:28 PM   #1
WORMDIRT
Junior Member
 
Join Date: August 31, 2012
Posts: 5
Help Identifying an old revolver

It is chambered for .44 short (what I have been told), and the story behind it is that it is from the mid 1800's. It is single action.
I know nothing about it.
Here are all the identifying marks, and a fullsize shot.



Uploaded with ImageShack.us


WORMDIRT is offline  
Old August 31, 2012, 05:50 PM   #2
SDC
Senior Member
 
Join Date: January 23, 2001
Location: People's Republic of Kanada
Posts: 1,652
This is a Belgian revolver made by Jean-Baptiste Ronge (JBR), but it should be double-action, by the looks of the trigger and guard; maybe the hand is out of place, not allowing it to cycle properly? There should be several Belgian proofmarks elsewhere on the revolver, including on the rear of the cylinder, and if you can see an inspector's mark (usually a letter with a star over it), this may help to date it. Ronge was in business from the early 1800s up to 1929, but this style of revolver looks like it dates from the early 1900s.
__________________
Gun control in Canada: making the streets safer for rapists, muggers, and other violent criminals since 1936.
SDC is offline  
Old August 31, 2012, 05:53 PM   #3
WORMDIRT
Junior Member
 
Join Date: August 31, 2012
Posts: 5
There is a L with a star above it on the cylinder. Thank you very much.
WORMDIRT is offline  
Old August 31, 2012, 05:58 PM   #4
SDC
Senior Member
 
Join Date: January 23, 2001
Location: People's Republic of Kanada
Posts: 1,652
Is it a script L, like it was handwritten, or more of a typed L? A script L shows that this revolver passed the initial proof of the Liege proofhouse, but each inspector in charge of the proofhouse would have used their own letter stamp.
__________________
Gun control in Canada: making the streets safer for rapists, muggers, and other violent criminals since 1936.
SDC is offline  
Old August 31, 2012, 06:03 PM   #5
WORMDIRT
Junior Member
 
Join Date: August 31, 2012
Posts: 5
Its a stamped in type style "L"
WORMDIRT is offline  
Old August 31, 2012, 06:17 PM   #6
SDC
Senior Member
 
Join Date: January 23, 2001
Location: People's Republic of Kanada
Posts: 1,652
The website I'm looking at shows that mark as being used after 1937, but by that time, Ronge was already out of business; have you got the cylinder out of the revolver, and do you see any other marks or letters on it?
__________________
Gun control in Canada: making the streets safer for rapists, muggers, and other violent criminals since 1936.
SDC is offline  
Old August 31, 2012, 06:21 PM   #7
WORMDIRT
Junior Member
 
Join Date: August 31, 2012
Posts: 5
A "5", a script "V" with a strange mark above it, and an "E" above a "LG" above a star, circled. Everything is in a type font, with an exception to the "V"
WORMDIRT is offline  
Old August 31, 2012, 06:28 PM   #8
SDC
Senior Member
 
Join Date: January 23, 2001
Location: People's Republic of Kanada
Posts: 1,652
The "ELG" (Epreuve Libertas Gentis) in an oval is one way of dating this revolver; if there isn't a crown on the top of the oval (just ELG over a star), then that means it was proofed before July 11, 1893. After that date, a crown was added to the top of the oval.
__________________
Gun control in Canada: making the streets safer for rapists, muggers, and other violent criminals since 1936.
SDC is offline  
Old August 31, 2012, 06:30 PM   #9
WORMDIRT
Junior Member
 
Join Date: August 31, 2012
Posts: 5
No crown, just a


E
LG
*
WORMDIRT is offline  
Old August 31, 2012, 06:35 PM   #10
SDC
Senior Member
 
Join Date: January 23, 2001
Location: People's Republic of Kanada
Posts: 1,652
Then, at the very least, you know it's an antique revolver, made in Belgium prior to July 1893, by JB Ronge. Hope this helps :-)

PS. This revolver is likely chambered for the 450 Revolver cartridge, and is commonly called an "RIC"-type, because the Royal Irish Constabulary bought lots of them; I wouldn't suggest firing it though, even if you could find some cartridges for it.
__________________
Gun control in Canada: making the streets safer for rapists, muggers, and other violent criminals since 1936.
SDC is offline  
Old August 31, 2012, 08:16 PM   #11
Mike Irwin
Staff
 
Join Date: April 13, 2000
Location: Northern Virginia
Posts: 41,374
Most likely it is chambered in 44 Webley, which was quite popular for this kind of revolver.
__________________
"The gift which I am sending you is called a dog, and is in fact the most precious and valuable possession of mankind" -Theodorus Gaza

Baby Jesus cries when the fat redneck doesn't have military-grade firepower.
Mike Irwin is offline  
Reply

Tags
.44 , help indentify , revolver

Thread Tools Search this Thread
Search this Thread:

Advanced Search

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off

Forum Jump


All times are GMT -5. The time now is 01:08 PM.


Powered by vBulletin® Version 3.8.7
Copyright ©2000 - 2024, vBulletin Solutions, Inc.
This site and contents, including all posts, Copyright © 1998-2021 S.W.A.T. Magazine
Copyright Complaints: Please direct DMCA Takedown Notices to the registered agent: thefiringline.com
Page generated in 0.04598 seconds with 10 queries