dan wesson barrel wrench

connieb · February 17, 2008, 08:51 AM

Hi all,
I need some direction as to where I could find a barrel wrench for a 44 magnum dan wesson. My boyfriend is looking for it and asked me to try to find one on the internet. He works many hours and also doesn't have or like to use a computer. I'd appreciate your help and I couldn't seem to find anything on e-bay or when searching nothing stood out. Thanks.....

Superhouse 15 · February 17, 2008, 12:49 PM

Gun Parts is out of them now, but keep checking back. They are probably the best bet. Make sure you also have the correct feeler gage, too.

http://www.e-gunparts.com/product.as...ductSKU=154960

SIGSHR · February 18, 2008, 12:24 AM

Why not contact CZ-USA, http://www.cz-usa.org. They now handle Dan
Wessons.

NGIB · February 18, 2008, 07:10 AM

They are also listed commonly on ebay. Looked a minute ago and their are 2 .44 wrenches right now. Just search for Dan Wesson from the main screen. Also, Genny at CZ-USA is great to deal with...

kc5gxc · February 19, 2008, 09:38 PM

I bought my barrel wrench from skeeter bob..... he works here....
Brazas Sporting Arms,Inc
P.O. Box 22
Monson , MA 01057
[email protected]

>>>> Pete : We have pre-plastic wrenches . They are steel with hex-head
>>>> adapters for the barrel . Price is $22.00 new or $17.00 used with 2
>>>> allens
>>>> gone . Shipping is $4.00 additional .
>>>> Bob

They sell the Dan Wesson parts.
Good luck
Pete

bamatj · February 19, 2008, 10:54 PM

Dont pay much for a dan wesson feeler gauge. Go to the parts store and buy one for $5.

February 17, 2008, 08:51 AM	#1
connieb Junior Member Join Date: February 17, 2008 Posts: 1	dan wesson barrel wrench Hi all, I need some direction as to where I could find a barrel wrench for a 44 magnum dan wesson. My boyfriend is looking for it and asked me to try to find one on the internet. He works many hours and also doesn't have or like to use a computer. I'd appreciate your help and I couldn't seem to find anything on e-bay or when searching nothing stood out. Thanks.....

February 17, 2008, 12:49 PM	#2
Superhouse 15 Senior Member Join Date: September 13, 2007 Location: Sunny Florida Posts: 844	Here Gun Parts is out of them now, but keep checking back. They are probably the best bet. Make sure you also have the correct feeler gage, too. http://www.e-gunparts.com/product.as...ductSKU=154960

February 18, 2008, 07:10 AM	#4
NGIB Senior Member Join Date: November 30, 2007 Location: Ft Stewart, GA Posts: 932	They are also listed commonly on ebay. Looked a minute ago and their are 2 .44 wrenches right now. Just search for Dan Wesson from the main screen. Also, Genny at CZ-USA is great to deal with... __________________ Proud to be a veteran. (USAF Retired, Army Civilian) I'm old, grumpy, and jaded - still vertical though...

February 18, 2008, 12:24 AM	#3
SIGSHR Senior Member Join Date: September 13, 2005 Posts: 4,700	Why not contact CZ-USA, http://www.cz-usa.org. They now handle Dan Wessons.

February 19, 2008, 09:38 PM	#5
kc5gxc Member Join Date: July 25, 2007 Location: Poplarville, MS Posts: 16	I bought my barrel wrench from skeeter bob..... he works here.... Brazas Sporting Arms,Inc P.O. Box 22 Monson , MA 01057 [email protected] >>>> Pete : We have pre-plastic wrenches . They are steel with hex-head >>>> adapters for the barrel . Price is $22.00 new or $17.00 used with 2 >>>> allens >>>> gone . Shipping is $4.00 additional . >>>> Bob They sell the Dan Wesson parts. Good luck Pete

February 19, 2008, 10:54 PM	#6
bamatj Member Join Date: December 23, 2007 Posts: 31	Dont pay much for a dan wesson feeler gauge. Go to the parts store and buy one for $5.