The Firing Line Forums

Go Back   The Firing Line Forums > The Skunkworks > The Smithy

Reply
 
Thread Tools Search this Thread
Old January 22, 2020, 08:22 PM   #1
montana09
Member
 
Join Date: April 29, 2018
Posts: 32
NM Blackhawk Barrel Swap

I have a question regarding a barrel swap on a NM blackhawk. If I were to swap the barrel on my current one for a complete shorter barrel would the sights, ejector housing, etc all line up and the cylinder gap be correct right off or would there need to be some machining done to get it all to function correctly? Trying to decide if it would be cheaper to swap barrels or just have the existing one cut down?
montana09 is offline  
Old January 23, 2020, 08:48 AM   #2
burrhead
Senior Member
 
Join Date: July 6, 1999
Location: Chihuahuan desert, Texas
Posts: 946
Unless you win the gunsmithing lottery, the shoulder or forcing cone will have to be faced off to set the cylinder gap. The cheapest thing to do is to sell the gun you have and buy the one you want.
__________________
Join the NRA and the TSRA

I'm offended by people that are easily offended.
burrhead is offline  
Old January 23, 2020, 01:56 PM   #3
T. O'Heir
Senior Member
 
Join Date: February 13, 2002
Location: Canada
Posts: 11,857
"...would the..." It'd be a definite maybe. Revolver barrels require fitting and are not drop in parts. It'd probably be best to contact Ruger and talk to 'em about it.
https://ruger.com/dataProcess/customerService/
__________________
Spelling and grammar count!
T. O'Heir is online now  
Old January 24, 2020, 09:31 AM   #4
KEYBEAR
Senior Member
 
Join Date: January 11, 2012
Location: Indiana
Posts: 948
The new barrel will need to be fit 99% sure . Also you do not say what barrel you have now and what barrel you go to . The cheaper way to go is cut the barrel you have now . All you would need is a sight base just use the one from the cut off barrel . Also a taller front sight Get one from Ruger (the tallest one they have ) Have it cut shorter as needed . You do not say if you have a gunsmith you can go to ? that is a cheap fix I have three had done and cost total is around $75 bucks to do . A good smith can do this and no reblue needed . It would help to know were you live we may know a good gunsmith ,
If your thinking just buy a new Ruger (Shorter barrel) it will be a small grip frame . I like the bigger grip of the Super Blackhawk .

Last edited by KEYBEAR; January 24, 2020 at 10:56 AM.
KEYBEAR is offline  
Old January 24, 2020, 03:19 PM   #5
montana09
Member
 
Join Date: April 29, 2018
Posts: 32
Thanks guys the main reason I ask is that every local gunsmith I've spoken with has quoted me $350+ to cut down and recrown a barrel, a price I find ridiculous. Luckily some searching found a gunsmith that's certified with great reviews 4 hrs away that'll do it for $75
montana09 is offline  
Old January 25, 2020, 08:25 PM   #6
Pathfinder45
Senior Member
 
Join Date: January 7, 2008
Posts: 2,866
I would think that you should contact Ruger and see what they would charge to change the barrel for you. I heard that they have good customer service.
Pathfinder45 is offline  
Old January 25, 2020, 09:22 PM   #7
J.G. Terry
Senior Member
 
Join Date: January 24, 2014
Posts: 578
My Marshall Dillon Special

My Marshall Dillon Special: When the Vaquero was fairly new on the market, I picked up a 4 7/8" cheap. The barrel had some damage at the muzzle. Returned the gun to Ruger and had a 71/2" barrel installed.

In the here and now, one project gun is a 44 Magnum Old Style Vaquero.I called the company on this project. I could have a different barrel installed. The basic prices are in the website to give you some idea of the cost. I still have that Marshall Dillon rebarreled Vaquero. It's a shooter and looks good with the Ajax stag grips.

Added: I also had a standard SBH rebarreled with a 10 1/2" barrel, As suggested in earlier posts contact the company.
__________________
Intentionally Antagonizing Another MemberInsults and Ad Hominems

Last edited by J.G. Terry; January 25, 2020 at 09:30 PM.
J.G. Terry is offline  
Reply

Thread Tools Search this Thread
Search this Thread:

Advanced Search

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off

Forum Jump


All times are GMT -5. The time now is 01:44 PM.


Powered by vBulletin® Version 3.8.7
Copyright ©2000 - 2020, vBulletin Solutions, Inc.
This site and contents, including all posts, Copyright © 1998-2018 S.W.A.T. Magazine
Copyright Complaints: Please direct DMCA Takedown Notices to the registered agent: thefiringline.com
Contact Us
Page generated in 0.04900 seconds with 10 queries