The Firing Line Forums

Go Back   The Firing Line Forums > Hogan's Alley > Handguns: The Semi-automatic Forum

Reply
 
Thread Tools Search this Thread
Old March 5, 2019, 02:46 PM   #1
HighValleyRanch
Senior Member
 
Join Date: July 15, 2005
Posts: 3,473
Magguts for the Kahr 9 and 40

Just found out that Magguts is very close to releasing their magazine +1 kits for the Kahr 9 series of pistols. I emailed them and said that the .40 is close to follow.
That means that with the flush magazine in the PM9, you would get 7+1 and in the P9 or CW9 series, 8+1 with the flush magazines.

https://magguts.com/product/kahr-9mm...ound-magazine/
__________________
From the sweet grass to the slaughter house; From birth until death; We travel between these two eternities........from 'Broken Trail"
HighValleyRanch is offline  
Old March 11, 2019, 10:42 AM   #2
Stubert
Member
 
Join Date: February 6, 2018
Location: Catskill Mtns. New York
Posts: 19
I have the mag guts in my S&W Bodyguard. Flawless functioning, and the slide locks back now 100% of the time.
Stubert is offline  
Old March 11, 2019, 07:48 PM   #3
Charlie98
Senior Member
 
Join Date: September 6, 2006
Location: Great state of Texas
Posts: 1,077
Jeepers... what sorcery is this??? There isn't much room in a CW9 mag... let alone in a CM9 mag... for another round.
__________________
_______________

"I have this pistol pointed at your heart!"
"That is my least vulnerable spot."
Charlie98 is offline  
Old March 11, 2019, 08:08 PM   #4
HighValleyRanch
Senior Member
 
Join Date: July 15, 2005
Posts: 3,473
If it's anything like the shield, they use a thinner metal follower and a flat spring that compresses more but still retains tension for all the rounds to give that extra space for one more round. My shield version work flawlessly.
__________________
From the sweet grass to the slaughter house; From birth until death; We travel between these two eternities........from 'Broken Trail"
HighValleyRanch is offline  
Old March 11, 2019, 08:10 PM   #5
JERRYS.
Senior Member
 
Join Date: September 23, 2013
Location: Alabama
Posts: 2,608
the G43 and G42 enjoyed the magguts design for several years now.
JERRYS. is offline  
Old March 12, 2019, 09:28 AM   #6
Tactical Jackalope
Senior Member
 
Join Date: December 5, 2010
Location: Miami, Florida
Posts: 6,395
And here I was, about to sell my Kahr K9.

Many manufacturers make these for Glocks, Jerry. Taran Tactical and Hyve. But I did not know Magguts have been making them for Glocks all this time!

Also, I am still selling the Kahr K9. Head to TFL gun show for any inquiries.
Tactical Jackalope is offline  
Old March 12, 2019, 10:24 AM   #7
HighValleyRanch
Senior Member
 
Join Date: July 15, 2005
Posts: 3,473
Quote:
Many manufacturers make these for Glocks, Jerry. Taran Tactical and Hyve.
These companies make "extensions" for added capacity, but I believe Magguts is the only one that you can add capacity with the same length magazine.
__________________
From the sweet grass to the slaughter house; From birth until death; We travel between these two eternities........from 'Broken Trail"
HighValleyRanch is offline  
Old March 12, 2019, 10:26 AM   #8
Tactical Jackalope
Senior Member
 
Join Date: December 5, 2010
Location: Miami, Florida
Posts: 6,395
Whoa! Wait a second. You're adding rounds with a flush magazine? That's some witchcraft right there.
Tactical Jackalope is offline  
Old March 12, 2019, 07:06 PM   #9
Carmady
Senior Member
 
Join Date: February 26, 2013
Location: on the lam
Posts: 1,402
I have the MagGuts in my Gen 2 LCP, only fired three mags through it, but there were zero malfunctions. That makes the LCP 7+1 with a flat /flush floorplate.

I'm also waiting for the Kahr 6-to-7 round 9mm MagGuts. I have an extra Wolff # 79301 mag spring and it's a little over twice as long as the 6-rd mag.
Carmady is offline  
Old January 19, 2020, 02:37 PM   #10
Carmady
Senior Member
 
Join Date: February 26, 2013
Location: on the lam
Posts: 1,402
Just found this, MagGuts +1 kits for Kahr 6 and 7 round mags.

https://www.youtube.com/watch?v=slw2s7WiU20

Edit:
MagGuts page for Kahr 9mm 6+1 and 7+1 kits.

https://magguts.com/product-category/kahr/

Last edited by Carmady; January 19, 2020 at 03:22 PM.
Carmady is offline  
Old January 19, 2020, 06:35 PM   #11
Carl the Floor Walker
Senior Member
 
Join Date: June 3, 2017
Posts: 655
I have them in my Kahr CW380 and function flawlessly. I also have the Gallaway Plus 1 for many of my Kahr CM9 and function great. I like the metal follower of the Magguts.
Carl the Floor Walker is offline  
Old January 20, 2020, 12:12 AM   #12
Dan-O
Senior Member
 
Join Date: August 3, 2011
Location: Northern Colorado
Posts: 895
Magguts are on order
Dan-O is online now  
Reply

Thread Tools Search this Thread
Search this Thread:

Advanced Search

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off

Forum Jump


All times are GMT -5. The time now is 12:15 PM.


Powered by vBulletin® Version 3.8.7
Copyright ©2000 - 2020, vBulletin Solutions, Inc.
This site and contents, including all posts, Copyright © 1998-2018 S.W.A.T. Magazine
Copyright Complaints: Please direct DMCA Takedown Notices to the registered agent: thefiringline.com
Contact Us
Page generated in 0.05813 seconds with 10 queries