|
Forum Rules | Firearms Safety | Firearms Photos | Links | Library | Lost Password | Email Changes |
Register | FAQ | Calendar | Search | Today's Posts | Mark Forums Read |
|
Thread Tools | Search this Thread |
March 16, 2010, 02:52 AM | #1 |
Senior Member
Join Date: October 6, 2008
Posts: 496
|
Barrel for 7.62x39 chambered AR SBR
lookin for a 7.5" barrel for a SBR AR. any suggestions?
__________________
There is one thing Chuck Norris is scared of, thats Clint Eastwood |
March 16, 2010, 11:41 AM | #2 |
Senior Member
Join Date: November 1, 2006
Location: Cypress, Texas
Posts: 933
|
Primary Weapons Systems. You may have some trouble getting a 7.5" 7.62 x 39 barrel to run smoothly. Don't plan on running it suppressed that short unless you really open up the gas port in the key and barrel. I've done quite a bit of research on SBRing this round and it seems that PWS is the only company that has perfected an upper and it's not as short as 7.5".
|
March 16, 2010, 07:25 PM | #3 |
Senior Member
Join Date: October 6, 2008
Posts: 496
|
im not too concerned about runnin a supressor on this particular rifle, its mainly a build it because i can gun
__________________
There is one thing Chuck Norris is scared of, thats Clint Eastwood |
March 18, 2010, 11:56 PM | #4 |
Senior Member
Join Date: May 11, 2005
Location: Texas
Posts: 761
|
I've got a M1S 11.5 7.62x39 & love it. I've been told if you ask them they'll build you a custom upper. I saw some guy on the internet running such an upper off an M16.
__________________
"Our contract called for 16 cases of rifles and ammunition for $10,000 dollars, not a machine gun...........That is our present to the General"-Pike Bishop “When fascism comes to America, it will be wrapped in the flag and carrying a cross.” |
Thread Tools | Search this Thread |
|
|