|
Forum Rules | Firearms Safety | Firearms Photos | Links | Library | Lost Password | Email Changes |
Register | FAQ | Calendar | Today's Posts | Search |
|
Thread Tools | Search this Thread |
February 25, 2017, 08:51 AM | #1 |
Junior Member
Join Date: February 24, 2017
Posts: 2
|
Gun cleaning kit or not?
Hi,
I just bought a 9mm and 45 acp pistol. I also have a shotgun and a rifle. I can't make a decision on whether to get a gun cleaning kit or not. I've searched and read many different things. I see some people say the kits have some things in it that you will never use. I did clean my 9mm last night with ballistol and a cotton swab..but the swab does leave back pieces of cotton. Any suggestions? |
February 25, 2017, 11:31 AM | #2 |
Senior Member
Join Date: December 1, 2005
Location: Tampa Bay
Posts: 1,804
|
I carry an Otis kit with me to the range. Pull thru brush and patches work fine for a quick clean when shooting that old mil-surp corrosive stuff.
|
February 25, 2017, 12:45 PM | #3 |
Senior Member
Join Date: December 10, 2014
Posts: 1,965
|
I have always just bought the pieces and made my own "kits".
I was in Wally World a while back and noticed they had some cheap towels for $2.50 or there 'bouts. I calculated from the measurements of the towels that I can average 900 patches from one towel. Bought a couple of them and gladly my calculations were correct. |
February 25, 2017, 12:55 PM | #4 |
Senior Member
Join Date: February 13, 2002
Location: Canada
Posts: 12,453
|
A cotton swab will absolutely leave tiny bits of itself behind. Go to a discount fabric shop and buy a couple yards of 36" wide(close counts, how wide isn't important. A yard is easiest to cut. Runs less than $10 for hundreds of patches) remnant flannelette(winter sheet/PJ material) and cut it into 2' x 4" strips. 1" x 2" for most hand guns.
Minimum thing required is a pistol length cleaning rod, a brush and a jag. Buying a kit is just the most convenient way of getting all of it at once. There are a lot of insane prices for kits. None of 'em is any better than the least expensive one. Paying more than about $20 is nutso. Cabela's currently has the Hoppe's Universal cleaning kit on sale at $16.99. Just add solvent.
__________________
Spelling and grammar count! |
February 25, 2017, 06:18 PM | #5 |
Senior Member
Join Date: March 16, 2007
Location: Southern Arizona
Posts: 3,888
|
The Otis kit is nice and a different way to clean vs. pushing the patch through the bore. I find it especially good for .17 hmr where a rod doesn't work so well. Other than that I've always bought good quality rods and added jags, etc. as needed. I see little use for the nice little boxes etc. that come with kits.
|
February 25, 2017, 09:42 PM | #6 |
Member
Join Date: August 14, 2010
Posts: 55
|
What comes in the kit? This is the bare minimum all you really need:
9mm and .45 bore brushes 9mm and .45 jags pistol cleaning rod CLP type cleaner or separate solvent and lube cotton cleaning patches silicone cloth to wipe down exterior If you want to go even more spartan, then replace the brushes, jags, and rod with 9mm and .45 boresnakes |
February 26, 2017, 12:21 AM | #7 |
Junior Member
Join Date: February 24, 2017
Posts: 2
|
So bore snakes will be better than the kits?
|
February 26, 2017, 12:26 AM | #8 |
Senior Member
Join Date: June 20, 2006
Location: Surprise, Az.
Posts: 766
|
I was using a bore snake but found it doesn't clean the chamber as well as a good brush and solvent. Recently I had a number of failure to feed problems extracting do to a dirty chamber. When I switched back to Brass Bore Brushes and patches the problem ceased.
I like M-Pro 7 as a cleaner and they make complete cleaning kits. You can't go wrong with them or with an Otis Kit. |
February 26, 2017, 01:37 AM | #9 |
Senior Member
Join Date: March 12, 2011
Location: Washington state
Posts: 1,558
|
Bore snakes are great for a quick cleaning of the barrel. They do not clean the entire gun. If the kit has things you will not use, just buy what you want to use separately. It may be more expensive to buy them separately though. I bought a kit and added the items that were not included that I wanted. To each their own. Not everyone uses the same method or materials. What matters is that you clean and protect your gun. How you do it will determine what you need and don't need.
__________________
You can't fix stupid....however ignorance can be cured through education! |
February 26, 2017, 01:52 AM | #10 |
Member
Join Date: January 2, 2015
Posts: 44
|
I have Tipton brand stuff. It's the best quality rods and attachments I've used so far
|
February 26, 2017, 12:02 PM | #11 | |
Member
Join Date: August 14, 2010
Posts: 55
|
Quote:
I used to be meticulous in cleaning my guns when I first started shooting/owning firearms. Used to spend upwards of 30 minutes cleaning per gun -- regardless of how many shots I fired through it -- which I now feel is mostly a waste of time. In most cases the gun does not need to be spotless and able to pass a white glove inspection. It needs to be reasonably free of residue/fouling, and more importantly, properly lubed. If I don't have time to clean a gun or know that I will be shooting it again within a day or two, I will simply re-lube the gun and inspect/inventory until I get around to cleaning it. Cleaning a gun should not be made more complicated than it actually is. The bare minimums I listed above are sufficient and can fit easily inside a small pouch or bag. Some people find cleaning an enjoyable activity, perhaps nostalgic. Not me. |
|
February 26, 2017, 04:27 PM | #12 |
Senior Member
Join Date: November 4, 1999
Location: Rebel South USA
Posts: 2,074
|
I don't buy kits.. I buy the individual items that I need. Most kits have 80% crap and 20% of things I will use.
I buy everything from J Dewey Rods. good luck
__________________
Life is a web woven by necessity and chance... |
February 26, 2017, 04:36 PM | #13 |
Senior Member
Join Date: December 6, 2014
Posts: 6,446
|
I like ProShot for brushes and jags - I buy online, 6each at a time (or more of cheaper by a sealed pack or 10) Patches are cheap enough.
You need a cleaning rod - one piece is preferable, patches, a solvent for cleaning, an oil or lubricant and properly sized brushes. There are all sorts of kits, but the better quality stuff is not sold in kits and is usually not found at Walmart. Since I also shoot rifle and shotguns, I have one piece rods for those with the corresponding patches, jags, brushes, etc. Brake cleaner, WD-40 and a host of other "non-gun" solvents will do an excellent job at a lot less cost than something with "GUN" on the label
__________________
"I believe that people have a right to decide their own destinies; people own themselves. I also believe that, in a democracy, government exists because (and only so long as) individual citizens give it a 'temporary license to exist'—in exchange for a promise that it will behave itself. In a democracy, you own the government—it doesn't own you."- Frank Zappa |
February 26, 2017, 04:54 PM | #14 |
Senior Member
Join Date: July 6, 1999
Location: Chihuahuan desert, Texas
Posts: 1,148
|
Buying a "kit" is a waste of money. Get a Plano fishing tackle box at Wally's and some jags, patches, solvent, etc. Buy a good rod (Wally won't have good ones; go online). Throw in a used toothbrush, whatever other little things you think you need and you're in business.
I've had the same tackle box for forty odd years.
__________________
Join the GOA, SAF and the TSRA I'm offended by people that are easily offended. |
|
|