November 16, 2008, 09:04 PM | #1 |
Member
Join Date: January 20, 2007
Posts: 18
|
Loose Wedge Pin
I have an old cheapy CVA muzzle loader kit gun that I am refinishing. The wedge pin that holds the barrel to the stock is so loose that it will fall out. Does anyone have any ideas on fixing this problem? Any help would be greatly appreciated.
Thanks MTHOM |
November 16, 2008, 09:23 PM | #2 |
Senior Member
Join Date: December 5, 2004
Location: In the Vincent, Ohio general area.
Posts: 1,804
|
wedge pin
Sir;
Take some thin wood strips and glue them on top of the wedge towards the stock wood, insert the wedge till it's tight and let set. Harry B. |
November 16, 2008, 10:30 PM | #3 |
Member
Join Date: January 20, 2007
Posts: 18
|
Loose Wedge Pin
Harry;
Thanks for the idea I'll try this out. |
November 17, 2008, 12:16 PM | #4 |
Member In Memoriam
Join Date: March 17, 1999
Posts: 24,383
|
Another possibility is peening the loop on the bottom of the barrel to tighten things up.
Jim |
|
|