The Firing Line Forums

Go Back   The Firing Line Forums > The Skunkworks > Handloading, Reloading, and Bullet Casting

Reply
 
Thread Tools Search this Thread
Old February 10, 2011, 08:37 PM   #1
south.texas.dead.I
Senior Member
 
Join Date: February 5, 2011
Posts: 282
.45acp casing

I started gathering casings from the local range and almost all the .45 casings I could find were CCIs that looked like this
Are these any good? They are not the shiny silver that I'm used to seeing so I figured id check here before collecting them in the future

Sent from my iPhone using Tapatalk
south.texas.dead.I is offline  
Old February 10, 2011, 08:38 PM   #2
DiscoRacing
Senior Member
 
Join Date: December 19, 2008
Location: milton, wv
Posts: 3,640
Aluminum... trash.

... cant reload em.
__________________
Desert Eagle Alliance Group Launcher Extraordinaire ______
----Get Busy Live'n.....Or....Get Busy Die'n......Red
-------They call me Dr. Bob,,,, I have a PhD in S&W
DiscoRacing is offline  
Old February 10, 2011, 08:54 PM   #3
Adamantium
Senior Member
 
Join Date: June 6, 1999
Location: El Paso, TX
Posts: 1,021
CCI does make brass casings, but those are aluminum and cannot be reloaded.
Adamantium is offline  
Old February 10, 2011, 09:20 PM   #4
south.texas.dead.I
Senior Member
 
Join Date: February 5, 2011
Posts: 282
Went from about 50 to 19 reloadable .45 cases. It's a quest


Sent from my iPhone using Tapatalk
south.texas.dead.I is offline  
Old February 10, 2011, 09:21 PM   #5
DiscoRacing
Senior Member
 
Join Date: December 19, 2008
Location: milton, wv
Posts: 3,640
This would help ya out..

http://thefiringline.com/forums/showthread.php?t=440410
__________________
Desert Eagle Alliance Group Launcher Extraordinaire ______
----Get Busy Live'n.....Or....Get Busy Die'n......Red
-------They call me Dr. Bob,,,, I have a PhD in S&W
DiscoRacing is offline  
Old February 10, 2011, 09:36 PM   #6
drail
Junior member
 
Join Date: February 2, 2008
Posts: 3,150
I can't tell for sure from the photo but they do like like CCI Blazer aluminum. Look inside and see if there is one hole or two. If there's two flash holes they're not reloadable. (technically you can reload them but they'll split after 1 loading.) CCI used to stamp NR (not reloadable) on the case head.
drail is offline  
Old February 10, 2011, 10:20 PM   #7
south.texas.dead.I
Senior Member
 
Join Date: February 5, 2011
Posts: 282
Quote:
Originally Posted by DiscoRacing View Post
Its a fs thread and it's been sold


Sent from my iPhone using Tapatalk
south.texas.dead.I is offline  
Old February 10, 2011, 10:27 PM   #8
DiscoRacing
Senior Member
 
Join Date: December 19, 2008
Location: milton, wv
Posts: 3,640
if you look on the FS listings here... Xfire68 and birdzman always have brass for sale.

http://thefiringline.com/forums/showthread.php?t=435034
__________________
Desert Eagle Alliance Group Launcher Extraordinaire ______
----Get Busy Live'n.....Or....Get Busy Die'n......Red
-------They call me Dr. Bob,,,, I have a PhD in S&W
DiscoRacing is offline  
Old February 10, 2011, 10:42 PM   #9
bossman
Senior Member
 
Join Date: November 16, 2010
Location: Arkansas
Posts: 996
But don't the Blazer brass have an odd size primer? If that's the case they aren't worth messing with.
__________________
NRA life member

When the going gets tough, I just open another beer.
bossman is offline  
Old February 10, 2011, 11:12 PM   #10
Shoney
Senior Member
 
Join Date: February 21, 2002
Location: Transplanted from Montana
Posts: 2,311
According to the SWAMMI at SAAMI - -

Casings are stuffed with sausage!

Cases are the remnant of fired cartridges.
__________________
I pledge allegiance to the Flag - - -, and to the Republic for which it stands….Our Forefathers were brilliant for giving us a Republic, not a democracy! Do you know the difference??? and WHY?http://www.wallbuilders.com/LIBissue...les.asp?id=111
Shoney is offline  
Reply

Thread Tools Search this Thread
Search this Thread:

Advanced Search

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off

Forum Jump


All times are GMT -5. The time now is 08:07 PM.


Powered by vBulletin® Version 3.8.7
Copyright ©2000 - 2024, vBulletin Solutions, Inc.
This site and contents, including all posts, Copyright © 1998-2021 S.W.A.T. Magazine
Copyright Complaints: Please direct DMCA Takedown Notices to the registered agent: thefiringline.com
Page generated in 0.06664 seconds with 8 queries