|
Forum Rules | Firearms Safety | Firearms Photos | Links | Library | Lost Password | Email Changes |
Register | FAQ | Calendar | Today's Posts | Search |
|
Thread Tools | Search this Thread |
June 12, 2005, 10:14 PM | #1 |
Senior Member
Join Date: October 28, 2004
Location: Central CA
Posts: 218
|
Changing Powders - RE: Static
Ok, I'm a brand new reloader and am enjoying loading my first batches. I've loaded for one rifle and am ready to switch over to another one, which requires a change of powder.
How do I get all of the old powder out of the measure? I emptied it upside down, but there's still a fair amount of powder adhered to the inside of the holding container due to static electricity. Any tricks or tips? m |
June 12, 2005, 10:39 PM | #2 |
Senior Member
Join Date: June 10, 2004
Location: Tioga co. PA
Posts: 2,647
|
powder and static charge
If you leave it alone for a day or two it may come free. but try turning it upside down on a clean dry hard surface and tapping it. Wash it with dishwashing soap as you would the dinner dishes. I have found Joy works best. it leaves something on the surface that prevents static buildup. I have heard that those tissues that you put in the dryer that contain fabric sofener work also but i have not tried it. I never leave powder in my measure. it goes back in the "can". I NEVER repeat NEVER have more than one container of powder on the bench. I store my powder in a separate place. Pour the unused powder in the wrong container just once and you in for some seriously bad ju-ju. I shudder that the thought of having a mix of bullseye and 4895 being loaded in a 30-06 round.
|
June 13, 2005, 12:22 AM | #3 |
Senior Member
Join Date: January 31, 2002
Location: Kansas City, Missouri
Posts: 193
|
Also, periodicly wipe it out with a used dryer anti-static sheet. It really works! Especially on new equipment.
__________________
"Dreams only have meaning because we struggle in the waking world." -- Major Motoko Kusanagi GitS:SAC Member of NRA and Western Missouri Shooters Alliance |
June 13, 2005, 09:42 AM | #4 |
Senior Member
Join Date: November 19, 2002
Location: Mississippi
Posts: 963
|
Can of Static-Guard... Spray and let dry before you ever start.
HTH. |
June 13, 2005, 05:50 PM | #5 |
Senior Member
Join Date: February 18, 2005
Posts: 1,874
|
Why is that some have so much trouble with static,me have never had any problem at all.On my Dillon can rub my fingers on the side of the canister and the powder will follow my finger up when I stop will fall off.But talking to some who reload the problem is quite bad using different powders will foul there press to the point of unusable.And even worse if some parts are plastic
__________________
Russ5924 |
June 13, 2005, 09:45 PM | #6 |
Senior Member
Join Date: January 25, 2005
Location: Texas of course
Posts: 277
|
To empty a powder measure that has a build up of static, I use an aluminum funnel and a cheapo paper plate.
Pour as much as I can thru the funnel back into the original container, then turn the measure upside down on the bench onto a paper plate and work the powder bar (550B) a few times. Fold the paper plate in half and tilt up one end, the powder pours back into the container easy as pie. One caveat, it MUST be a PAPER plate, <NOT> a styrofoam plate, like the Hefty brand. To keep static build up from being a problem, once or twice in a blue moon, I take a drop of car wax and rub it into a paper towel. Run this all inside the powder reservoir tube (acrylic I think) and let it sit about 10 minutes to make sure it is 100% air dry. Do this, and you won't have a static buildup again in that reservoir for a coon's age, if ever. I also am a firm believer of only *one* powder anywhere near my bench at a time. I like things that go bang, as long as it isn't me BigSlick
__________________
Nobody likes war, but if you find yourself in one - fight for those you serve with and to make the trip home. Show mercy to those that deserve it and a relentless, ruthless, cunning evil to those who don't. |
|
|