The Firing Line Forums

Go Back   The Firing Line Forums > The North Corral > Black Powder and Cowboy Action Shooting

Reply
 
Thread Tools Search this Thread
Old January 17, 2013, 03:10 PM   #1
10851Man
Senior Member
 
Join Date: April 20, 2009
Location: High Desert Mountains CA.
Posts: 410
.375" and .380" Balls in .36 Caliber - Confused:

Seems that some guns like the harder to find .380 balls and others like .375" balls. I have a bunch of .375" on hand and wonder why the big difference in guns of the same (.36) caliber????
10851Man is offline  
Old January 17, 2013, 03:13 PM   #2
TomADC
Senior Member
 
Join Date: October 14, 2009
Location: San Diego County
Posts: 795
I buy from this member over at castboolits he has a great product and good prices.

http://castboolits.gunloads.com/show...ght=masscaster
__________________
US Navy Retired,NRA Life Member,SASS member, Time magazine's Person of the Year 2006!
TomADC is offline  
Old January 17, 2013, 03:14 PM   #3
10851Man
Senior Member
 
Join Date: April 20, 2009
Location: High Desert Mountains CA.
Posts: 410
How does one determine which ball diameter a particular pistols wants to digest???
10851Man is offline  
Old January 17, 2013, 03:27 PM   #4
TomADC
Senior Member
 
Join Date: October 14, 2009
Location: San Diego County
Posts: 795
You bought the .375 why? If I understand right most Pieeta like them and Uberti .36 cal like the .380 but I like to see how much of a lead ring is produced when I seat the ball, if there isn't some resistance when the ball is seated then with full/heavy charge the other balls may walk forward. I have both sizes, my little Uberti 1862 took the .380's as does my .36 cal ASM.
__________________
US Navy Retired,NRA Life Member,SASS member, Time magazine's Person of the Year 2006!
TomADC is offline  
Old January 17, 2013, 03:29 PM   #5
smokepole14
Member
 
Join Date: March 20, 2010
Location: Alabama
Posts: 56
My uberti 62 police has to have 380. With 375 there was hardly any lead shaving at all. Matter of fact the balls even fell out of the cylinder as I was loading it. Ordered some 380 problem solved!! If 375 is all you can get they'll do but from now on all ill use is 380.

As long as there is a lead ring shaved off when you seat the ball then you'll have the right sized ball.
__________________
Neemo: So if you want these horses, I sell them to you. Did you bring some gold with you? John Chisum No. Neemo: Silver?
John Chisum: Just lead!
smokepole14 is offline  
Old January 17, 2013, 04:05 PM   #6
mykeal
Senior Member
 
Join Date: October 8, 2006
Location: Northern Michigan
Posts: 2,772
Quote:
How does one determine which ball diameter a particular pistols wants to digest???
Measure the chamber diameters.
mykeal is offline  
Old January 17, 2013, 04:35 PM   #7
deerslayer303
Senior Member
 
Join Date: January 10, 2011
Location: Leesville SC
Posts: 2,652
Just go with the .380 it'll shave off whats needed for a tighter fit. May have to use a little more force. I had a bunch of .457 balls left over from the ROA (that I sold like a doughnut head) and I regularly shove them in the '58 sheriff. Shaves a nice ring of lead but they go in tight and seal up good. My philosophy Buy .380's for 36's .454's for 44's. That way you only have to worry about one size of ball for each caliber. And if a loading stand is used no sweat. Just my .02
__________________
"I prefer dangerous freedom over peaceful slavery."
- Thomas Jefferson
deerslayer303 is offline  
Old January 20, 2013, 03:17 AM   #8
arcticap
Senior Member
 
Join Date: March 15, 2005
Location: Central Connecticut
Posts: 3,166
I recently met up with a fellow that loads his ROA with .451 balls and 40 grains of powder and he said that he hasn't run into any problems. I was surprised because that's not what is recommended, but in actuality it's been working in his gun. He said that he also uses over powder wads and some kind of a seal over the balls. Maybe those also help to prevent ball creep.
arcticap is offline  
Old January 20, 2013, 08:57 AM   #9
Rifleman1776
Senior Member
 
Join Date: April 25, 2010
Location: Arkansas
Posts: 3,309
You don't say what "gun" you want to use them in. Others have assumed you are talking about C&B revolvers.
If using soft lead either will be just fine as long as you get a little shaving of lead on seating into the chamber.
Using a .451 ball in a ROA might "work" but it is not the best choice. Regardless of wads, etc. you can still get gas blow by in the cylinder and lower velocity. It also might not swage properly in the forcing cone and degreade accuracy. It 'might' be OK and might "work" but always best to with proven methods.
Rifleman1776 is offline  
Old January 20, 2013, 10:39 AM   #10
Idaho Spud
Senior Member
 
Join Date: April 7, 2010
Posts: 330
I use 375's in my Pietta with complete satisfaction, good ring of lead and all. 380's are probably a better compromise if you have more than one brand of gun. If you can't find 'em, cast 'em yourself, that's what I do.
Idaho Spud is offline  
Old January 20, 2013, 05:57 PM   #11
10851Man
Senior Member
 
Join Date: April 20, 2009
Location: High Desert Mountains CA.
Posts: 410
Thanks for the info...

I am trying to avoid casting as I think I have had enough exposure to lead to last a lifetime...
10851Man is offline  
Old January 20, 2013, 07:17 PM   #12
Hawg
Senior Member
 
Join Date: September 8, 2007
Location: Mississippi
Posts: 16,177
Wash your hands good before you eat or get your fingers near your mouth and you'll be ok. You have to get lead a lot hotter than a lead pot will get to have fumes.
Hawg is offline  
Old January 20, 2013, 09:29 PM   #13
Idaho Spud
Senior Member
 
Join Date: April 7, 2010
Posts: 330
Been casting boolits for over 30 years. That's a lifetime for some people! Just gotta be careful, though. I am.
Idaho Spud is offline  
Old January 20, 2013, 10:02 PM   #14
deerslayer303
Senior Member
 
Join Date: January 10, 2011
Location: Leesville SC
Posts: 2,652
I haven't been casting long, but I take necessary precautions. I wear all the PPE , respirator or mask, long sleeves, pants, steel toe boots, and do it outside. And like hawg said wash my hands before I have a nip of skoal.
__________________
"I prefer dangerous freedom over peaceful slavery."
- Thomas Jefferson
deerslayer303 is offline  
Old January 22, 2013, 03:15 PM   #15
10851Man
Senior Member
 
Join Date: April 20, 2009
Location: High Desert Mountains CA.
Posts: 410
I found some great suppliers.....I am getting lazy too...
10851Man is offline  
Reply

Thread Tools Search this Thread
Search this Thread:

Advanced Search

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off

Forum Jump


All times are GMT -5. The time now is 01:09 AM.


Powered by vBulletin® Version 3.8.7
Copyright ©2000 - 2024, vBulletin Solutions, Inc.
This site and contents, including all posts, Copyright © 1998-2021 S.W.A.T. Magazine
Copyright Complaints: Please direct DMCA Takedown Notices to the registered agent: thefiringline.com
Page generated in 0.06480 seconds with 10 queries