Were to get unchambered Ak Barrel blanks?

A pause for the COZ · March 2, 2015, 01:13 PM

Any one know where to find one? I have a plan

Scorch · March 2, 2015, 05:39 PM

Green Mountain Barrels.

5thShock · March 2, 2015, 05:44 PM

Well, now that you know where to get the barrel can you tell us why you are going to chamber it for 6.8mm?

A pause for the COZ · March 2, 2015, 05:56 PM

Nothing that outlandish.
Just going to make a carbine barrel in 327 magnum for my Rossi Wizard.
No one else will make me a carbine in 327 mag so I guess I have to make my own.

Scorch · March 2, 2015, 11:53 PM

Good luck setting up that rimmed cartridge to feed.

A pause for the COZ · March 3, 2015, 07:24 AM

The Wizard is a single shot that has replaceable barrels.
The hardest part will be the extractor.
Need to find a 1 inch blank as that is the same diameter of the existing barrel at the breach.

March 2, 2015, 01:13 PM	#1
A pause for the COZ Senior Member Join Date: October 11, 2012 Location: Braham, Minnesota Posts: 1,314	Were to get unchambered Ak Barrel blanks? Any one know where to find one? I have a plan

March 2, 2015, 05:39 PM	#2
Scorch Senior Member Join Date: February 13, 2006 Location: Washington state Posts: 15,248	Green Mountain Barrels. __________________ Never try to educate someone who resists knowledge at all costs. But what do I know? Summit Arms Services

March 2, 2015, 11:53 PM	#5
Scorch Senior Member Join Date: February 13, 2006 Location: Washington state Posts: 15,248	Good luck setting up that rimmed cartridge to feed. __________________ Never try to educate someone who resists knowledge at all costs. But what do I know? Summit Arms Services

March 2, 2015, 05:44 PM	#3
5thShock Senior Member Join Date: August 28, 2006 Posts: 400	Well, now that you know where to get the barrel can you tell us why you are going to chamber it for 6.8mm?

March 2, 2015, 05:56 PM	#4
A pause for the COZ Senior Member Join Date: October 11, 2012 Location: Braham, Minnesota Posts: 1,314	Nothing that outlandish. Just going to make a carbine barrel in 327 magnum for my Rossi Wizard. No one else will make me a carbine in 327 mag so I guess I have to make my own.

March 3, 2015, 07:24 AM	#6
A pause for the COZ Senior Member Join Date: October 11, 2012 Location: Braham, Minnesota Posts: 1,314	The Wizard is a single shot that has replaceable barrels. The hardest part will be the extractor. Need to find a 1 inch blank as that is the same diameter of the existing barrel at the breach.